using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Drawing;
using System.Data;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Windows.Forms;
using MeasureData;
using System.Configuration;

namespace HOZProject
{
    public partial class UControl_Init : UserControl
    {
        #region 全局变量
        String[] sT;
        String[] firms;
        Configuration config = ConfigurationManager.OpenExeConfiguration(ConfigurationUserLevel.None);
        private FormHOZMain formHOZMain;
        public FormHOZMain FormHOZMainObject { get => formHOZMain; set => formHOZMain = value; }
        //模板路径
        private string readConfigPath;
        public string ReadConfigPath { get => readConfigPath; set => readConfigPath = value; }
        #endregion

        public UControl_Init(FormHOZMain formHOZ)
        {
            InitializeComponent();
            FormHOZMainObject = formHOZ;
        }
        private void UControl_Init_Load(object sender, EventArgs e)
        {
            
        }

        private void btnClose_Click(object sender, EventArgs e)
        {
            Form fParent = this.ParentForm;
            fParent.Close();
        }

        private void pbCutHoleFile_Click(object sender, EventArgs e)
        {
            if (FormHOZMainObject.m_MeasureFile == null)
            {
                MessageBox.Show("请新建一个测量文件");
            }
            else
            {
                if (!FormHOZMainObject.m_MeasureFile.GetCutHolesFromFile(""))
                {
                    MessageBox.Show("导入切孔失败");
                }
                else
                {
                    List<CutHole> ListCutHole = FormHOZMainObject.m_MeasureFile.ListCutHole;
                    //文件路径
                    string filePath = FormHOZMainObject.m_MeasureFile.FilePath;
                    string fileName = FormHOZMainObject.m_MeasureFile.FileName;
                    FormHOZMainObject.CreateCutHoleList(ListCutHole);
                    //显示导入的切孔数量
                    lblCutHoleCount.Text = string.Format("成功导入{0}个切孔",ListCutHole.Count);
                    tbCutHoleFilePath.Text = filePath + fileName;
                }
            }
        }

        /// <summary>
        /// 根据一个切孔,自动计算其他切孔信息
        /// </summary>
        /// <param name="sender"></param>
        /// <param name="e"></param>
        private void pbCutHoleAuto_Click(object sender, EventArgs e)
        {

        }

        private void pbTemplateFile_Click(object sender, EventArgs e)
        {
            string FilePathName;
            string fileNameWithoutExtension;
            //新建一个文件对话框
            OpenFileDialog pOpenFileDialog = new OpenFileDialog();
            //设置对话框标题
            pOpenFileDialog.Title = "选择模板文件";
            //设置打开文件类型
            pOpenFileDialog.Filter = "ely文件（*.ely）|*.ely";
            //监测文件是否存在
            pOpenFileDialog.CheckFileExists = true;
            //文件打开后执行以下程序
            if (pOpenFileDialog.ShowDialog() == DialogResult.OK)
            {
                FilePathName = System.IO.Path.GetFullPath(pOpenFileDialog.FileName);  //绝对路径
                fileNameWithoutExtension = System.IO.Path.GetFileNameWithoutExtension(FilePathName);
                this.txtWPTF.Text = fileNameWithoutExtension;
            }
        }

        private void pbFIBTemplateFile_Click(object sender, EventArgs e)
        {
            string FilePathName;
            string fileNameWithoutExtension;
            //新建一个文件对话框
            OpenFileDialog pOpenFileDialog = new OpenFileDialog();
            //设置对话框标题
            pOpenFileDialog.Title = "选择模板文件";
            //设置打开文件类型
            pOpenFileDialog.Filter = "ely文件（*.ely）|*.ely";
            //监测文件是否存在
            pOpenFileDialog.CheckFileExists = true;
            //文件打开后执行以下程序
            if (pOpenFileDialog.ShowDialog() == DialogResult.OK)
            {
                FilePathName = System.IO.Path.GetFullPath(pOpenFileDialog.FileName);  //绝对路径
                fileNameWithoutExtension = System.IO.Path.GetFileNameWithoutExtension(FilePathName);
                this.txtWFIBF.Text = fileNameWithoutExtension;
            }
        }

        #region 创建与读取样品参数文件
        private void btnCreateConfig_Click(object sender, EventArgs e)
        {
            ConfigFile cfm = new ConfigFile();
            cfm.Is_Photograph = chkWIsP.Checked;
            cfm.PT_Depostion = chkWPT.Checked;
            cfm.PT_ELYFile = txtWPTF.Text;
            cfm.FIB_ELYFile = txtWFIBF.Text;
            cfm.Stretch_Magnification = Convert.ToDouble(cbbWLZ.Text);
            cfm.Location_Magnification = Convert.ToDouble(cbbWQGF.Text);
            cfm.Location_Voltage = Convert.ToDouble(cbbWQGD.Text);
            cfm.Photograph_Magnification = Convert.ToDouble(cbbWPZF.Text);
            cfm.Photograph_Voltage = Convert.ToDouble(cbbWPZD.Text);
            if (cbbWXZ.SelectedIndex == 0)
            {
                cfm.Correction_Angle = 36.0;
            }
            else
            {
                cfm.Correction_Angle = 54.0;
            }

            cfm.Sample_Type = cbbWYP.Text;
            cfm.Firm = cbbWCS.Text;

            SaveFileDialog saveFileDialog = new SaveFileDialog();
            saveFileDialog.Filter = "样品参数文件|*.cfg";
            if (saveFileDialog.ShowDialog() == DialogResult.OK)
            {
                cfm.Save(saveFileDialog.FileName);
            }
            else
            {
                return;
            }
            List<String> _sT = sT.ToList();
            if (_sT.IndexOf(cbbWYP.Text) < 0)
            {
                _sT.Add(cbbWYP.Text);
                sT = _sT.ToArray();
                string wsT = "";
                for (int i = 0; i < sT.Length; i++)
                {
                    wsT += sT[i] + ",";
                }
                wsT = wsT.Substring(0, wsT.Length - 1);
                config.AppSettings.Settings["Sample_Type"].Value = wsT;
            }
            List<String> _firms = firms.ToList();
            if (_firms.IndexOf(cbbWCS.Text) < 0)
            {
                _firms.Add(cbbWCS.Text);
                firms = _firms.ToArray();
                string wFirms = "";
                for (int i = 0; i < firms.Length; i++)
                {
                    wFirms += firms[i] + ",";
                }
                wFirms = wFirms.Substring(0, wFirms.Length - 1);
                config.AppSettings.Settings["Firm"].Value = wFirms;
            }
            config.Save(ConfigurationSaveMode.Modified);
            ConfigurationManager.RefreshSection("appSettings");//重新加载新的配置文件
        }
        public void Reloadconfig()
        {
            String sample_Type = ConfigurationManager.AppSettings["Sample_Type"];
            String firm = ConfigurationManager.AppSettings["Firm"];
            sT = sample_Type.Split(',');
            cbbWYP.Items.Clear();
            for (int i = 0; i < sT.Length; i++)
            {
                cbbWYP.Items.Add(sT[i]);
            }
            firms = firm.Split(',');
            cbbWCS.Items.Clear();
            for (int i = 0; i < firms.Length; i++)
            {
                cbbWCS.Items.Add(firms[i]);
            }

            cbbWYP.SelectedIndex = 0;
            cbbWCS.SelectedIndex = 0;
            cbbWXZ.SelectedIndex = 0;
            cbbWPZD.SelectedIndex = 0;
            cbbWPZF.SelectedIndex = 0;
            cbbWLZ.SelectedIndex = 0;
            cbbWQGD.SelectedIndex = 0;
            cbbWQGF.SelectedIndex = 0;
        }

        public void ReadConfigInfo()
        {
            if (!ReadConfigPath.Equals(""))
            {
                Reloadconfig();
                ConfigFile cfm = new ConfigFile();
                cfm.Read(ReadConfigPath);
                chkWIsP.Checked = cfm.Is_Photograph;
                chkWPT.Checked = cfm.PT_Depostion;
                txtWPTF.Text = cfm.PT_ELYFile;
                txtWFIBF.Text = cfm.FIB_ELYFile;
                cbbWLZ.Text = cfm.Stretch_Magnification.ToString();
                cbbWQGF.Text = cfm.Location_Magnification.ToString();
                cbbWQGD.Text = cfm.Location_Voltage.ToString();
                cbbWPZF.Text = cfm.Photograph_Magnification.ToString();
                cbbWPZD.Text = cfm.Photograph_Voltage.ToString();
                cbbWXZ.Text = cfm.Correction_Angle.ToString();
                cbbWYP.Text = cfm.Sample_Type;
                cbbWCS.Text = cfm.Firm;
            }
        }
        private void btnReadConfig_Click(object sender, EventArgs e)
        {
            //OpenFileDialog openFileDialog = new OpenFileDialog();
            //openFileDialog.Filter = "样品参数文件|*.cfg";
            //if (openFileDialog.ShowDialog() == DialogResult.OK)
            //{
            //    ConfigFile cfm = new ConfigFile();
            //    cfm.Read(openFileDialog.FileName);
            //}
            ReadConfigInfo();
        }

        #endregion

        
    }
}