using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Drawing;
using System.Data;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Windows.Forms;
using MeasureData;
using System.Configuration;
using FileManager;

namespace HOZProject
{
    public partial class UControl_Init : UserControl
    {
        #region 全局变量
        String[] sT;
        String[] firms;
        String[] WPZD;
        String[] WPZF;
        String[] WQGD;
        String[] WQGF;
        String[] WLZ;
        Configuration config = ConfigurationManager.OpenExeConfiguration(ConfigurationUserLevel.None);
        private FormHOZMain formHOZMain;
        public FormHOZMain FormHOZMainObject { get => formHOZMain; set => formHOZMain = value; }
        //模板路径
        private string readConfigPath;
        public string ReadConfigPath { get => readConfigPath; set => readConfigPath = value; }
        #endregion

        #region 构造方法
        public UControl_Init(FormHOZMain formHOZ)
        {
            InitializeComponent();
            FormHOZMainObject = formHOZ;
        }
        #endregion

        private void UControl_Init_Load(object sender, EventArgs e)
        {

        }

        #region 关闭窗体
        private void btnClose_Click(object sender, EventArgs e)
        {
            Form fParent = this.ParentForm;
            fParent.Close();
        }
        #endregion

        #region 加载切孔文件，生成切孔列表
        private void pbCutHoleFile_Click(object sender, EventArgs e)
        {
            if (FormHOZMainObject.m_MeasureFile == null)
            {
                MessageBox.Show("请新建一个测量文件");
            }
            else
            {
                if (!FormHOZMainObject.m_MeasureFile.GetCutHolesFromFile(""))
                {
                    MessageBox.Show("导入切孔失败");
                }
                else
                {
                    List<CutHole> ListCutHole = FormHOZMainObject.m_MeasureFile.ListCutHole;
                    //文件路径
                    string filePath = FormHOZMainObject.m_MeasureFile.FilePath;
                    string fileName = FormHOZMainObject.m_MeasureFile.FileName;
                    FormHOZMainObject.CreateCutHoleList(ListCutHole);
                    //显示导入的切孔数量
                    lblCutHoleCount.Text = string.Format("成功导入{0}个切孔", ListCutHole.Count);
                    tbCutHoleFilePath.Text = filePath + fileName;
                }
            }
        }
        #endregion

        #region 根据一个切孔文件,自动计算其他切孔信息
        /// <summary>
        /// 根据一个切孔,自动计算其他切孔信息
        /// </summary>
        /// <param name="sender"></param>
        /// <param name="e"></param>
        private void pbCutHoleAuto_Click(object sender, EventArgs e)
        {

        }
        #endregion

        #region 加载PT模板文件，生成切孔列表
        private void pbTemplateFile_Click(object sender, EventArgs e)
        {
            string FilePathName;
            string fileNameWithoutExtension;
            //新建一个文件对话框
            OpenFileDialog pOpenFileDialog = new OpenFileDialog();
            //设置对话框标题
            pOpenFileDialog.Title = "选择模板文件";
            //设置打开文件类型
            pOpenFileDialog.Filter = "ely文件（*.ely）|*.ely";
            //监测文件是否存在
            pOpenFileDialog.CheckFileExists = true;
            //文件打开后执行以下程序
            if (pOpenFileDialog.ShowDialog() == DialogResult.OK)
            {
                FilePathName = System.IO.Path.GetFullPath(pOpenFileDialog.FileName);  //绝对路径
                fileNameWithoutExtension = System.IO.Path.GetFileNameWithoutExtension(FilePathName);
                this.txtWPTF.Text = fileNameWithoutExtension;
            }
        }
        #endregion

        #region 加载FIB模板文件，生成切孔列表
        private void pbFIBTemplateFile_Click(object sender, EventArgs e)
        {
            string FilePathName;
            string fileNameWithoutExtension;
            //新建一个文件对话框
            OpenFileDialog pOpenFileDialog = new OpenFileDialog();
            //设置对话框标题
            pOpenFileDialog.Title = "选择模板文件";
            //设置打开文件类型
            pOpenFileDialog.Filter = "ely文件（*.ely）|*.ely";
            //监测文件是否存在
            pOpenFileDialog.CheckFileExists = true;
            //文件打开后执行以下程序
            if (pOpenFileDialog.ShowDialog() == DialogResult.OK)
            {
                FilePathName = System.IO.Path.GetFullPath(pOpenFileDialog.FileName);  //绝对路径
                fileNameWithoutExtension = System.IO.Path.GetFileNameWithoutExtension(FilePathName);
                this.txtWFIBF.Text = fileNameWithoutExtension;
            }
        }
        #endregion

        #region 创建与读取样品参数文件
        private void btnCreateConfig_Click(object sender, EventArgs e)
        {
            ConfigFile cfm = new ConfigFile();
            cfm.Is_Photograph = chkWIsP.Checked;
            cfm.PT_Depostion = chkWPT.Checked;
            cfm.PT_ELYFile = txtWPTF.Text;
            cfm.FIB_ELYFile = txtWFIBF.Text;
            cfm.Stretch_Magnification = Convert.ToDouble(cbbWLZ.Text);
            cfm.Location_Magnification = Convert.ToDouble(cbbWQGF.Text);
            cfm.Location_Voltage = Convert.ToDouble(cbbWQGD.Text);
            cfm.Photograph_Magnification = Convert.ToDouble(cbbWPZF.Text);
            cfm.Photograph_Voltage = Convert.ToDouble(cbbWPZD.Text);
            if (cbbWXZ.SelectedIndex == 0)
            {
                cfm.Correction_Angle = 36.0;
            }
            else
            {
                cfm.Correction_Angle = 54.0;
            }

            cfm.Sample_Type = cbbWYP.Text;
            cfm.Firm = cbbWCS.Text;

            SaveFileDialog saveFileDialog = new SaveFileDialog();
            saveFileDialog.Filter = "样品参数文件|*.cfg";
            if (saveFileDialog.ShowDialog() == DialogResult.OK)
            {
                cfm.Save(saveFileDialog.FileName);
            }
            else
            {
                return;
            }
            //编辑Config文件
            EditConfig();
        }

        /// <summary>
        /// 编辑confing 文件信息
        /// </summary>
        public void EditConfig()
        {
            //样品类型
            List<String> _sT = sT.ToList();
            if (_sT.IndexOf(cbbWYP.Text) < 0)
            {
                _sT.Add(cbbWYP.Text);
                string wsT = string.Join(",", _sT.ToArray());
                config.AppSettings.Settings["Sample_Type"].Value = wsT;
            }
            //厂商
            List<String> _firms = firms.ToList();
            if (_firms.IndexOf(cbbWCS.Text) < 0)
            {
                _firms.Add(cbbWCS.Text);
                string wFirms = string.Join(",", _firms.ToArray());
                config.AppSettings.Settings["Firm"].Value = wFirms;
            }
            //拍照电压
            List<String> _WPZD = WPZD.ToList();
            if (_WPZD.IndexOf(cbbWPZD.Text) < 0)
            {
                _WPZD.Add(cbbWPZD.Text);
                string wWPZD = string.Join(",", _WPZD.ToArray());
                config.AppSettings.Settings["WPZD"].Value = wWPZD;
            }
            //拍照放大位数
            List<String> _WPZF = WPZF.ToList();
            if (_WPZF.IndexOf(cbbWPZF.Text) < 0)
            {
                _WPZF.Add(cbbWPZF.Text);
                string wWPZF = string.Join(",", _WPZF.ToArray());
                config.AppSettings.Settings["WPZF"].Value = wWPZF;
            }
            //定位切割电压
            List<String> _WQGD = WQGD.ToList();
            if (_WQGD.IndexOf(cbbWQGD.Text) < 0)
            {
                _WQGD.Add(cbbWQGD.Text);
                string wWQGD = string.Join(",", _WQGD.ToArray());
                config.AppSettings.Settings["WQGD"].Value = wWQGD;
            }
            //定位切割放大位数
            List<String> _WQGF = WQGF.ToList();
            if (_WQGF.IndexOf(cbbWQGF.Text) < 0)
            {
                _WQGF.Add(cbbWQGF.Text);
                string wWQGF = string.Join(",", _WQGF.ToArray());
                config.AppSettings.Settings["WQGF"].Value = wWQGF;
            }
            //拉直操作放大位数
            List<String> _WLZ = WLZ.ToList();
            if (_WLZ.IndexOf(cbbWLZ.Text) < 0)
            {
                _WLZ.Add(cbbWLZ.Text);
                string wWLZ = string.Join(",", _WLZ.ToArray());
                config.AppSettings.Settings["WLZ"].Value = wWLZ;
            }
            config.Save(ConfigurationSaveMode.Modified);
            ConfigurationManager.RefreshSection("appSettings");//重新加载新的配置文件
            ReloadConfig();
        }

        /// <summary>
        /// 删除config文件节点中内容信息
        /// </summary>
        public bool DelConfigNodeContentInfo(string delControlName, string selName)
        {
            try
            {
                switch (delControlName)
                {
                    case "WYP":
                        //样品类型
                        List<String> _sT = sT.ToList();
                        _sT.Remove(selName);
                        string wsT = string.Join(",", _sT.ToArray());
                        config.AppSettings.Settings["Sample_Type"].Value = wsT;
                        break;
                    case "WCS":
                        //厂商
                        List<String> _firms = firms.ToList();
                        _firms.Remove(selName);
                        string wFirms = string.Join(",", _firms.ToArray());
                        config.AppSettings.Settings["Firm"].Value = wFirms;
                        break;
                    case "WPZD":
                        //拍照电压
                        List<String> _WPZD = WPZD.ToList();
                        _WPZD.Remove(selName);
                        string wWPZD = string.Join(",", _WPZD.ToArray());
                        config.AppSettings.Settings["WPZD"].Value = wWPZD;
                        break;
                    case "WPZF":
                        //拍照放大位数
                        List<String> _WPZF = WPZF.ToList();
                        _WPZF.Remove(selName);
                        string wWPZF = string.Join(",", _WPZF.ToArray());
                        config.AppSettings.Settings["WPZF"].Value = wWPZF;
                        break;
                    case "WQGD"://定位切割电压
                        List<String> _WQGD = WQGD.ToList();
                        _WQGD.Remove(selName);
                        string wWQGD = string.Join(",", _WQGD.ToArray());
                        config.AppSettings.Settings["WQGD"].Value = wWQGD;
                        break;
                    case "WQGF": //定位切割放大位数
                        List<String> _WQGF = WQGF.ToList();
                        _WQGF.Remove(selName);
                        string wWQGF = string.Join(",", _WQGF.ToArray());
                        config.AppSettings.Settings["WQGF"].Value = wWQGF;
                        break;
                    case "WLZ":
                        //拉直操作放大位数
                        List<String> _WLZ = WLZ.ToList();
                        _WLZ.Remove(selName);
                        string wWLZ = string.Join(",", _WLZ.ToArray());
                        config.AppSettings.Settings["WLZ"].Value = wWLZ;
                        break;
                }
                config.Save(ConfigurationSaveMode.Modified);
                ConfigurationManager.RefreshSection("appSettings");//重新加载新的配置文件
                return true;
            }
            catch (Exception ex)
            {
                LogManager.LogError(ex.Message);
                return true;
            }
        }

        /// <summary>
        /// 绑定下拉菜单
        /// </summary>
        /// <param name="cb"></param>
        /// <param name="strGroup"></param>
        private void BindComboxData(ComboBox cb, string[] strGroup)
        {
            for (int i = 0; i < strGroup.Length; i++)
            {
                if (!strGroup[i].Equals(""))
                {
                    cb.Items.Add(strGroup[i]);
                }
            }
        }

        /// <summary>
        /// 读取Config文件信息
        /// </summary>
        public void ReloadConfig()
        {
            cbbWYP.Items.Clear();
            cbbWCS.Items.Clear();
            cbbWPZD.Items.Clear();
            cbbWPZF.Items.Clear();
            cbbWQGD.Items.Clear();
            cbbWQGF.Items.Clear();
            cbbWLZ.Items.Clear();

            string sample_Type = ConfigurationManager.AppSettings["Sample_Type"];
            string firm = ConfigurationManager.AppSettings["Firm"];
            string WPZDTemp = ConfigurationManager.AppSettings["WPZD"];
            string WPZFTemp = ConfigurationManager.AppSettings["WPZF"];
            string WQGDTemp = ConfigurationManager.AppSettings["WQGD"];
            string WQGFTemp = ConfigurationManager.AppSettings["WQGF"];
            string WLZTemp = ConfigurationManager.AppSettings["WLZ"];
            //样品类型
            sT = sample_Type.Split(',');
            BindComboxData(cbbWYP, sT);
            //厂商
            firms = firm.Split(',');
            BindComboxData(cbbWCS, firms);
            //拍照电压
            WPZD = WPZDTemp.Split(',');
            BindComboxData(cbbWPZD, WPZD);
            //拍照放大位数
            WPZF = WPZFTemp.Split(',');
            BindComboxData(cbbWPZF, WPZF);
            //定位切割电压
            WQGD = WQGDTemp.Split(',');
            BindComboxData(cbbWQGD, WQGD);
            //定位切割放大位数
            WQGF = WQGFTemp.Split(',');
            BindComboxData(cbbWQGF, WQGF);
            //拉直操作放大位数
            WLZ = WLZTemp.Split(',');
            BindComboxData(cbbWLZ, WLZ);

            cbbWYP.SelectedIndex = 0;
            cbbWCS.SelectedIndex = 0;
            cbbWXZ.SelectedIndex = 0;
            cbbWPZD.SelectedIndex = 0;
            cbbWPZF.SelectedIndex = 0;
            cbbWLZ.SelectedIndex = 0;
            cbbWQGD.SelectedIndex = 0;
            cbbWQGF.SelectedIndex = 0;
        }

        /// <summary>
        /// 根据所选路径，读取模板文件
        /// </summary>
        public void ReadConfigInfo()
        {
            if (!ReadConfigPath.Equals(""))
            {
                ReloadConfig();
                ConfigFile cfm = new ConfigFile();
                cfm.Read(ReadConfigPath);
                chkWIsP.Checked = cfm.Is_Photograph;
                chkWPT.Checked = cfm.PT_Depostion;
                txtWPTF.Text = cfm.PT_ELYFile;
                txtWFIBF.Text = cfm.FIB_ELYFile;
                cbbWLZ.Text = cfm.Stretch_Magnification.ToString();
                cbbWQGF.Text = cfm.Location_Magnification.ToString();
                cbbWQGD.Text = cfm.Location_Voltage.ToString();
                cbbWPZF.Text = cfm.Photograph_Magnification.ToString();
                cbbWPZD.Text = cfm.Photograph_Voltage.ToString();
                cbbWXZ.Text = cfm.Correction_Angle.ToString();
                cbbWYP.Text = cfm.Sample_Type;
                cbbWCS.Text = cfm.Firm;
            }
        }
        #endregion

        #region 删除下拉菜单选择项

        private void DelComboBoxItem_Click(object sender, EventArgs e)
        {
            if (MessageBox.Show("是否删除所选项信息？", "提示", MessageBoxButtons.YesNo, MessageBoxIcon.Information) == DialogResult.Yes)
            {
                PictureBox pbDel = (PictureBox)sender;
                string ctrlName = pbDel.Name.Substring(5, pbDel.Name.Length - 5);
                if (DelComboBoxItem(ctrlName))
                {
                    //重新加载
                    ReloadConfig(); 
                }
            }
        }

        /// <summary>
        /// 删除下拉菜单选择项
        /// </summary>
        public bool DelComboBoxItem(string controlName)
        {
            string delName = controlName;
            foreach (Control item in this.Controls)
            {
                if (item is ComboBox)
                {
                    if (item.Name.Contains(delName))
                    {
                        ComboBox cb = (ComboBox)item;
                        return DelConfigNodeContentInfo(delName, cb.Text);
                    }
                }
            }
            return false;
        }
        #endregion

        #region 根据是否仅拍照，进行逻辑判断
        private void chkWIsP_CheckedChanged(object sender, EventArgs e)
        {
            if (chkWIsP.Checked)
            {
                chkWPT.Checked = false;
                chkWPT.Visible = false;
            }
            else
            {
                chkWPT.Visible = true;
            }
        }
        #endregion
    }
}