using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Drawing;
using System.Data;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Windows.Forms;
using MeasureData;
using System.Configuration;
using FileManager;
using System.IO;
using System.Runtime.InteropServices;


namespace HOZProject
{
    public partial class UControl_Init : UserControl
    {
        #region 成员变量
        String[] sT;
        String[] firms;
        String[] WPZD;
        String[] WPZF;
        String[] WQGD;
        String[] WQGF;
        String[] WLZ;
        String[] WFIB;
        Configuration config = ConfigurationManager.OpenExeConfiguration(ConfigurationUserLevel.None);
        private FormHOZMain formHOZMain;
        public FormHOZMain FormHOZMainObject { get => formHOZMain; set => formHOZMain = value; }
        //模板路径
        private string readConfigPath;
        public string ReadConfigPath { get => readConfigPath; set => readConfigPath = value; }
        //模板文件默认路径
        private string m_TemplateFilePath;
        #endregion

        #region 构造方法
        public UControl_Init(FormHOZMain formHOZ)
        {
            InitializeComponent();
            FormHOZMainObject = formHOZ;
        }
        #endregion

        #region 窗体加载
        private void UControl_Init_Load(object sender, EventArgs e)
        {

        } 
        #endregion

        #region 关闭窗体
        private void btnClose_Click(object sender, EventArgs e)
        {
            Form fParent = this.ParentForm;
            fParent.Close();
        }
        #endregion

        #region 加载切孔文件，生成切孔列表
        private void pbCutHoleFile_Click(object sender, EventArgs e)
        {
            try
            {
                if (FormHOZMainObject.m_MeasureFile == null)
                {
                    MessageBox.Show("请新建一个测量文件！", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
                }
                else
                {
                    if (!FormHOZMainObject.m_MeasureFile.GetCutHolesFromFile(""))
                    {
                        MessageBox.Show("导入切孔失败！", "提示", MessageBoxButtons.OK, MessageBoxIcon.Warning);
                    }
                    else
                    {
                        List<CutHole> ListCutHole = FormHOZMainObject.m_MeasureFile.ListCutHole;
                        //文件路径
                        string CutHoleFilePath = FormHOZMainObject.m_MeasureFile.CutHoleFilePath;
                        FormHOZMainObject.CreateCutHoleList(ListCutHole);
                        //显示导入的切孔数量
                        lblCutHoleCount.Text = string.Format("成功导入{0}个切孔", ListCutHole.Count);
                        tbCutHoleFilePath.Text = CutHoleFilePath;
                        //保存测量文件
                        if (FormHOZMainObject.IsSave)
                        {
                            FormHOZMainObject.m_MeasureFile.Save();
                        }
                    }
                }
            }
            catch (Exception ex)
            {
                LogManager.LogError(ex.Message);
            }
        }
        #endregion

        #region 根据一个切孔文件,自动计算其他切孔信息
        /// <summary>
        /// 根据一个切孔,自动计算其他切孔信息
        /// </summary>
        /// <param name="sender"></param>
        /// <param name="e"></param>
        private void pbCutHoleAuto_Click(object sender, EventArgs e)
        {
            try
            {
                if (FormHOZMainObject.m_MeasureFile == null)
                {
                    MessageBox.Show("请新建一个测量文件！", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
                }
                else
                {
                    if (!FormHOZMainObject.m_MeasureFile.GetCutHolesFromFile(""))
                    {
                        MessageBox.Show("导入切孔失败！", "提示", MessageBoxButtons.OK, MessageBoxIcon.Warning);
                    }
                    else
                    {
                        List<CutHole> ListCutHole = FormHOZMainObject.m_MeasureFile.ListCutHole;
                        if (ListCutHole != null)
                        {
                            if (ListCutHole.Count > 0)
                            {
                                //根据切孔文件的一个切孔，自动计算其他切孔位置
                                float centerX = 65;
                                float centerY = 65;
                                float firstX = ListCutHole[0].Position.X;
                                float firstY = ListCutHole[0].Position.Y;
                                //距离
                                float distance = Convert.ToSingle(config.AppSettings.Settings["distance"].Value.ToString());
                                //矩阵 4*4
                                int rag = Convert.ToInt32(config.AppSettings.Settings["rag"].Value.ToString());
                                List<PointF> cutHolePoint = new List<PointF>();
                                //根据一个切孔点计算其他切孔信息
                                cutHolePoint = AnalysisPosition(centerX, centerY, firstX, firstY, distance, rag);
                                if (!FormHOZMainObject.m_MeasureFile.GetCutHolesFromAnalysisPosition(cutHolePoint))
                                {
                                    MessageBox.Show("生成切孔失败！", "提示", MessageBoxButtons.OK, MessageBoxIcon.Warning);
                                }
                                else
                                {
                                    //文件路径
                                    string CutHoleFilePath = FormHOZMainObject.m_MeasureFile.CutHoleFilePath;
                                    //重新获取切孔列表信息
                                    ListCutHole = FormHOZMainObject.m_MeasureFile.ListCutHole;
                                    //创建切孔列表信息
                                    FormHOZMainObject.CreateCutHoleList(ListCutHole);
                                    //显示导入的切孔数量
                                    lblCutHoleCount.Text = string.Format("成功生成{0}个切孔", ListCutHole.Count);
                                    tbCutHoleFilePath.Text = CutHoleFilePath;
                                }
                            }
                        }
                        //保存测量文件
                        if (FormHOZMainObject.IsSave)
                        {
                            FormHOZMainObject.m_MeasureFile.Save();
                        }
                    }
                }
            }
            catch (Exception ex)
            {
                LogManager.LogError(ex.Message);
            }
        }

        /// <summary>
        /// 分析点坐标
        /// </summary>
        /// <param name="centerX">中心点X轴坐标</param>
        /// <param name="centerY">中心点Y轴坐标</param>
        /// <param name="firstX">第一个点X轴坐标</param>
        /// <param name="firstY">第一个点Y轴坐标</param>
        /// <param name="distance">点与点的距离</param>
        /// <param name="rag">行、列数</param>
        /// <param name="ptsx">计算生成所有X轴坐标</param>
        /// <param name="ptsy">计算生成所有Y轴坐标</param>
        public List<PointF> AnalysisPosition(float centerX, float centerY, float firstX, float firstY, float distance, int rag)
        {
            //求样品1的水平角度
            double angle = 0;

            //清空所有点信息
            List<float> ptsx = new List<float>();
            List<float> ptsy = new List<float>();
            //将第一个点加入到点信息中
            ptsx.Add(firstX);
            ptsy.Add(firstY);

            //计算第一个点与X轴的交角度数
            angle = Math.Atan2(ptsy[0] - centerY, centerX - ptsx[0]) * 180 / Math.PI;

            //这里是求与第一个点横向排列的其他点的移动角度
            //就是按45度向左向右移动的度
            angle = 45 - angle;
            angle = angle * Math.PI / 180;

            float tx = 0;
            float ty = 0;
            for (int j = 0; j < rag; j++)
            {
                //计算每行第一个点的坐标
                if (j > 0)
                {
                    tx = (float)(distance * j * Math.Sin(angle));
                    ty = (float)(distance * j * Math.Cos(angle));
                    ptsx.Add(tx + ptsx[0]);
                    ptsy.Add(ptsy[0] - ty);
                }
                //计算每行其他点的坐标
                for (int i = 1; i < rag; i++)
                {
                    tx = (float)(distance * i * Math.Cos(angle));
                    ty = (float)(distance * i * Math.Sin(angle));
                    ptsx.Add(tx + ptsx[j * rag]);
                    ptsy.Add(ty + ptsy[j * rag]);
                }
            }
            List<PointF> pts = new List<PointF>();
            for (int i = 0; i < ptsx.Count; i++)
            {
                //增加的点
                PointF pf = new PointF();
                pf.X = ptsx[i];
                pf.Y = ptsy[i];
                pts.Add(pf);
            }
            return pts;
        }
        #endregion

        #region 加载PT模板文件
        private void pbTemplateFile_Click(object sender, EventArgs e)
        {
            string FilePathName;
            string fileNameWithoutExtension;
            //新建一个文件对话框
            OpenFileDialog pOpenFileDialog = new OpenFileDialog();
            //设置对话框标题
            pOpenFileDialog.Title = "选择模板文件";
            //设置打开文件类型
            pOpenFileDialog.Filter = "ely文件（*.ely）|*.ely";
            ////监测文件是否存在
            //pOpenFileDialog.CheckFileExists = true;
            
            //文件打开后执行以下程序
            if (pOpenFileDialog.ShowDialog() == DialogResult.OK)
            {
                FilePathName = System.IO.Path.GetFullPath(pOpenFileDialog.FileName);  //绝对路径
                fileNameWithoutExtension = System.IO.Path.GetFileNameWithoutExtension(FilePathName);
                this.txtWPTF.Text = FilePathName;
            }
        }
        #endregion

        #region 加载FIB模板文件
        private void pbFIBTemplateFile_Click(object sender, EventArgs e)
        {
            string FilePathName;
            string fileNameWithoutExtension;
            //新建一个文件对话框
            OpenFileDialog pOpenFileDialog = new OpenFileDialog();
            //设置对话框标题
            pOpenFileDialog.Title = "选择模板文件";
            //设置打开文件类型
            pOpenFileDialog.Filter = "ely文件（*.ely）|*.ely";
            ////监测文件是否存在
            //pOpenFileDialog.CheckFileExists = true;
            //文件打开后执行以下程序
            if (pOpenFileDialog.ShowDialog() == DialogResult.OK)
            {
                FilePathName = System.IO.Path.GetFullPath(pOpenFileDialog.FileName);  //绝对路径
                fileNameWithoutExtension = System.IO.Path.GetFileNameWithoutExtension(FilePathName);
                this.txtWFIBF.Text = FilePathName;
            }
        }
        #endregion

        #region 创建与读取样品参数、配置文件
        private void btnCreateConfig_Click(object sender, EventArgs e)
        {
            if (Convert.ToInt32(cbbWFIB.Text) < 200)
            {
                MessageBox.Show("FIB最小放大倍数为200倍");
            }
            else
            {
                SaveTemplateFile();
            }
        }
        /// <summary>
        /// 获取测量参数，初始化窗体中的控件信息
        /// </summary>   
        /// <returns></returns>
        public MeasureParam GetMeasureParamInfo()
        {
            MeasureParam cfm = new MeasureParam();
            cfm.Is_Photograph = chkWIsP.Checked;
            cfm.PT = chkWPT.Checked;
            //自动对焦模式
            //cfm.FocusMode = chkManul.Checked;
            cfm.PTTemp = txtWPTF.Text;
            cfm.FIBTemp = txtWFIBF.Text;
            cfm.Stretch_Magnification = Convert.ToSingle(cbbWLZ.Text);
            cfm.Location_Magnification = Convert.ToSingle(cbbWQGF.Text);
            cfm.Location_Voltage = Convert.ToSingle(cbbWQGD.Text);
            cfm.Photograph_Magnification = Convert.ToSingle(cbbWPZF.Text);
            cfm.Photograph_Voltage = Convert.ToSingle(cbbWPZD.Text);
            cfm.FIB_Magnification = Convert.ToSingle(cbbWFIB.Text);
            if (cbbWXZ.SelectedIndex == 0)
            {
                cfm.Correction_Angle = 36;
            }
            else
            {
                cfm.Correction_Angle = 54;
            }

            cfm.SampleName = cbbWYP.Text;
            cfm.Firm = cbbWCS.Text;
            return cfm;
        }

        public void SaveTemplateFile()
        {
            MeasureParam cfm = new MeasureParam();
            cfm.Is_Photograph = chkWIsP.Checked;
            cfm.PT = chkWPT.Checked;
            //自动对焦模式
            //cfm.FocusMode = chkManul.Checked;
            cfm.PTTemp = txtWPTF.Text;
            cfm.FIBTemp = txtWFIBF.Text;
            cfm.Stretch_Magnification = Convert.ToSingle(cbbWLZ.Text);
            cfm.Location_Magnification = Convert.ToSingle(cbbWQGF.Text);
            cfm.Location_Voltage = Convert.ToSingle(cbbWQGD.Text);
            cfm.Photograph_Magnification = Convert.ToSingle(cbbWPZF.Text);
            cfm.Photograph_Voltage = Convert.ToSingle(cbbWPZD.Text);
            cfm.FIB_Magnification = Convert.ToSingle(cbbWFIB.Text);
            if (cbbWXZ.SelectedIndex == 0)
            {
                cfm.Correction_Angle = 36;
            }
            else
            {
                cfm.Correction_Angle = 54;
            }

            cfm.SampleName = cbbWYP.Text;
            cfm.Firm = cbbWCS.Text;
            ConfigFile cf = new ConfigFile(cfm);
            if (!m_TemplateFilePath.Equals(""))
            {
                if (!Directory.Exists(m_TemplateFilePath))
                {
                    //创建路径
                    //Directory.CreateDirectory(m_TemplateFilePath);
                    FolderBrowserDialog dialog = new FolderBrowserDialog();
                    dialog.Description = "请选择文件路径";
                    //dialog.RootFolder = Environment.SpecialFolder.Programs;
                    if (dialog.ShowDialog() == DialogResult.OK)
                    {
                        m_TemplateFilePath = dialog.SelectedPath;
                        config.AppSettings.Settings["TemplateFilePath"].Value = m_TemplateFilePath;
                        config.Save(ConfigurationSaveMode.Modified);
                        ConfigurationManager.RefreshSection("appSettings");//重新加载新的配置文件
                    }
                }
            }
            SaveFileDialog saveFileDialog = new SaveFileDialog();
            //设置默认打开路径(绝对路径)
            saveFileDialog.InitialDirectory = m_TemplateFilePath;
            saveFileDialog.Filter = "样品参数文件|*.cfg";
            if (saveFileDialog.ShowDialog() == DialogResult.OK)
            {
                cf.Save(saveFileDialog.FileName);
            }
            else
            {
                return;
            }
            //编辑Config文件
            EditConfig();
        }
        /// <summary>
        /// 编辑confing 文件信息
        /// </summary>
        public bool EditConfig()
        {
            try
            {
                //设置数据源信息
                //样品类型
                List<String> _sT = sT.ToList();
                if (_sT.IndexOf(cbbWYP.Text) < 0)
                {
                    _sT.Add(cbbWYP.Text);
                    string wsT = string.Join(",", _sT.ToArray());
                    config.AppSettings.Settings["Sample_Type"].Value = wsT;
                }
                //厂商
                List<String> _firms = firms.ToList();
                if (_firms.IndexOf(cbbWCS.Text) < 0)
                {
                    _firms.Add(cbbWCS.Text);
                    string wFirms = string.Join(",", _firms.ToArray());
                    config.AppSettings.Settings["Firm"].Value = wFirms;
                }
                //拍照电压
                List<String> _WPZD = WPZD.ToList();
                if (_WPZD.IndexOf(cbbWPZD.Text) < 0)
                {
                    _WPZD.Add(cbbWPZD.Text);
                    string wWPZD = string.Join(",", _WPZD.ToArray());
                    config.AppSettings.Settings["WPZD"].Value = wWPZD;
                }
                //拍照放大位数
                List<String> _WPZF = WPZF.ToList();
                if (_WPZF.IndexOf(cbbWPZF.Text) < 0)
                {
                    _WPZF.Add(cbbWPZF.Text);
                    string wWPZF = string.Join(",", _WPZF.ToArray());
                    config.AppSettings.Settings["WPZF"].Value = wWPZF;
                }
                //定位切割电压
                List<String> _WQGD = WQGD.ToList();
                if (_WQGD.IndexOf(cbbWQGD.Text) < 0)
                {
                    _WQGD.Add(cbbWQGD.Text);
                    string wWQGD = string.Join(",", _WQGD.ToArray());
                    config.AppSettings.Settings["WQGD"].Value = wWQGD;
                }
                //定位切割放大位数
                List<String> _WQGF = WQGF.ToList();
                if (_WQGF.IndexOf(cbbWQGF.Text) < 0)
                {
                    _WQGF.Add(cbbWQGF.Text);
                    string wWQGF = string.Join(",", _WQGF.ToArray());
                    config.AppSettings.Settings["WQGF"].Value = wWQGF;
                }
                //拉直操作放大位数
                List<String> _WLZ = WLZ.ToList();
                if (_WLZ.IndexOf(cbbWLZ.Text) < 0)
                {
                    _WLZ.Add(cbbWLZ.Text);
                    string wWLZ = string.Join(",", _WLZ.ToArray());
                    config.AppSettings.Settings["WLZ"].Value = wWLZ;
                }
                //FIB放大位数
                List<String> _WFIB = WFIB.ToList();
                if (_WFIB.IndexOf(cbbWFIB.Text) < 0)
                {
                    _WFIB.Add(cbbWFIB.Text);
                    string wWFIB = string.Join(",", _WFIB.ToArray());
                    config.AppSettings.Settings["WFIB"].Value = wWFIB;
                }

                MeasureParam cfm = new MeasureParam();
                cfm.Is_Photograph = chkWIsP.Checked;
                
                cfm.FocusMode = Convert.ToInt32(config.AppSettings.Settings["Focus_Mode"].Value);
                cfm.PT = chkWPT.Checked;
                //自动对焦模式
                //cfm.FocusMode = chkManul.Checked;
                cfm.PTTemp = txtWPTF.Text;
                cfm.FIBTemp = txtWFIBF.Text;
                cfm.Stretch_Magnification = Convert.ToSingle(cbbWLZ.Text);
                cfm.Location_Magnification = Convert.ToSingle(cbbWQGF.Text);
                cfm.Location_Voltage = Convert.ToSingle(cbbWQGD.Text);
                cfm.Photograph_Magnification = Convert.ToSingle(cbbWPZF.Text);
                cfm.Photograph_Voltage = Convert.ToSingle(cbbWPZD.Text);
                cfm.FIB_Magnification = Convert.ToSingle(cbbWFIB.Text);

                //倾斜观测
                cfm.Title = chkWqxkc.Checked;
                //移动Z轴大小
                cfm.ZDistance = Convert.ToSingle(cbbYDZZDX.Text);

                if (cbbWXZ.SelectedIndex == 0)
                {
                    cfm.Correction_Angle = 36;
                }
                else
                {
                    cfm.Correction_Angle = 54;
                }

                cfm.SampleName = cbbWYP.Text;
                cfm.Firm = cbbWCS.Text;
                //设置配置文件默认值
                config.AppSettings.Settings["Is_Photograph"].Value = cfm.Is_Photograph.ToString();
                config.AppSettings.Settings["PT_Depostion"].Value = cfm.PT.ToString();
                config.AppSettings.Settings["PT_ELYFile"].Value = cfm.PTTemp;
                config.AppSettings.Settings["FIB_ELYFile"].Value = cfm.FIBTemp;
                config.AppSettings.Settings["Stretch_Magnification"].Value = cfm.Stretch_Magnification.ToString();
                config.AppSettings.Settings["Location_Magnification"].Value = cfm.Location_Magnification.ToString();
                config.AppSettings.Settings["Location_Voltage"].Value = cfm.Location_Voltage.ToString();
                config.AppSettings.Settings["Photograph_Magnification"].Value = cfm.Photograph_Magnification.ToString();
                config.AppSettings.Settings["Photograph_Voltage"].Value = cfm.Photograph_Voltage.ToString();
                config.AppSettings.Settings["Correction_Angle"].Value = cfm.Correction_Angle.ToString();
                config.AppSettings.Settings["SampleName"].Value = cfm.SampleName;
                config.AppSettings.Settings["Firms"].Value = cfm.Firm;

                config.AppSettings.Settings["Is_Title"].Value = cfm.Title.ToString();
                config.AppSettings.Settings["ZDistance"].Value = cfm.ZDistance.ToString();
                config.Save(ConfigurationSaveMode.Modified);
                ConfigurationManager.RefreshSection("appSettings");//重新加载新的配置文件
                return true;
            }
            catch (Exception ex)
            {
                LogManager.LogError(ex.Message);
                return false;
            }
        }

        /// <summary>
        /// 删除config文件节点中内容信息
        /// </summary>
        public bool DelConfigNodeContentInfo(string delControlName, string selName)
        {
            try
            {
                switch (delControlName)
                {
                    case "WYP":
                        //样品类型
                        List<String> _sT = sT.ToList();
                        _sT.Remove(selName);
                        string wsT = string.Join(",", _sT.ToArray());
                        config.AppSettings.Settings["Sample_Type"].Value = wsT;
                        break;
                    case "WCS":
                        //厂商
                        List<String> _firms = firms.ToList();
                        _firms.Remove(selName);
                        string wFirms = string.Join(",", _firms.ToArray());
                        config.AppSettings.Settings["Firm"].Value = wFirms;
                        break;
                    case "WPZD":
                        //拍照电压
                        List<String> _WPZD = WPZD.ToList();
                        _WPZD.Remove(selName);
                        string wWPZD = string.Join(",", _WPZD.ToArray());
                        config.AppSettings.Settings["WPZD"].Value = wWPZD;
                        break;
                    case "WPZF":
                        //拍照放大位数
                        List<String> _WPZF = WPZF.ToList();
                        _WPZF.Remove(selName);
                        string wWPZF = string.Join(",", _WPZF.ToArray());
                        config.AppSettings.Settings["WPZF"].Value = wWPZF;
                        break;
                    case "WQGD"://定位切割电压
                        List<String> _WQGD = WQGD.ToList();
                        _WQGD.Remove(selName);
                        string wWQGD = string.Join(",", _WQGD.ToArray());
                        config.AppSettings.Settings["WQGD"].Value = wWQGD;
                        break;
                    case "WQGF": //定位切割放大位数
                        List<String> _WQGF = WQGF.ToList();
                        _WQGF.Remove(selName);
                        string wWQGF = string.Join(",", _WQGF.ToArray());
                        config.AppSettings.Settings["WQGF"].Value = wWQGF;
                        break;
                    case "WLZ":
                        //拉直操作放大位数
                        List<String> _WLZ = WLZ.ToList();
                        _WLZ.Remove(selName);
                        string wWLZ = string.Join(",", _WLZ.ToArray());
                        config.AppSettings.Settings["WLZ"].Value = wWLZ;
                        break;
                }
                config.Save(ConfigurationSaveMode.Modified);
                ConfigurationManager.RefreshSection("appSettings");//重新加载新的配置文件
                return true;
            }
            catch (Exception ex)
            {
                LogManager.LogError(ex.Message);
                return true;
            }
        }

        /// <summary>
        /// 绑定下拉菜单
        /// </summary>
        /// <param name="cb"></param>
        /// <param name="strGroup"></param>
        private void BindComboxData(ComboBox cb, string[] strGroup)
        {
            for (int i = 0; i < strGroup.Length; i++)
            {
                if (!strGroup[i].Equals(""))
                {
                    cb.Items.Add(strGroup[i]);
                }
            }
        }

        /// <summary>
        /// 读取Config文件信息
        /// </summary>
        public void ReloadConfig()
        {
            cbbWYP.Items.Clear();
            cbbWCS.Items.Clear();
            cbbWPZD.Items.Clear();
            cbbWPZF.Items.Clear();
            cbbWQGD.Items.Clear();
            cbbWQGF.Items.Clear();
            cbbWLZ.Items.Clear();
            cbbWFIB.Items.Clear();
            cbbYDZZDX.Text = "0";
            m_TemplateFilePath = config.AppSettings.Settings["TemplateFilePath"].Value.ToString();
            string sample_Type = config.AppSettings.Settings["Sample_Type"].Value.ToString();
            string firm = config.AppSettings.Settings["Firm"].Value.ToString();
            string WPZDTemp = config.AppSettings.Settings["WPZD"].Value.ToString();
            string WPZFTemp = config.AppSettings.Settings["WPZF"].Value.ToString();
            string WQGDTemp = config.AppSettings.Settings["WQGD"].Value.ToString();
            string WQGFTemp = config.AppSettings.Settings["WQGF"].Value.ToString();
            string WLZTemp = config.AppSettings.Settings["WLZ"].Value.ToString();
            string WFIBTemp = config.AppSettings.Settings["WFIB"].Value.ToString();
            //string ZZDistance = config.AppSettings.Settings["ZDistance"].Value.ToString();
            
            
            //样品类型
            sT = sample_Type.Split(',');
            BindComboxData(cbbWYP, sT);
            //厂商
            firms = firm.Split(',');
            BindComboxData(cbbWCS, firms);
            //拍照电压
            WPZD = WPZDTemp.Split(',');
            BindComboxData(cbbWPZD, WPZD);
            //拍照放大位数
            WPZF = WPZFTemp.Split(',');
            BindComboxData(cbbWPZF, WPZF);
            //定位切割电压
            WQGD = WQGDTemp.Split(',');
            BindComboxData(cbbWQGD, WQGD);
            //定位切割放大位数
            WQGF = WQGFTemp.Split(',');
            BindComboxData(cbbWQGF, WQGF);
            //拉直操作放大位数
            WLZ = WLZTemp.Split(',');
            BindComboxData(cbbWLZ, WLZ);
            //FIB放大倍数
            WFIB = WFIBTemp.Split(',');
            BindComboxData(cbbWFIB, WFIB);
            
            //设置配置文件默认值
            chkWIsP.Checked=Convert.ToBoolean(config.AppSettings.Settings["Is_Photograph"].Value);
            chkWPT.Checked = Convert.ToBoolean(config.AppSettings.Settings["PT_Depostion"].Value);
            //倾斜观测
            chkWqxkc.Checked = Convert.ToBoolean(config.AppSettings.Settings["Is_Title"].Value);
            //移动Z轴大小
            cbbYDZZDX.Text = config.AppSettings.Settings["ZDistance"].Value;
            //自动对焦模式
            //chkManul.Checked = Convert.ToBoolean(config.AppSettings.Settings["Focus_Mode"].Value);
            txtWPTF.Text = config.AppSettings.Settings["PT_ELYFile"].Value;
            txtWFIBF.Text = config.AppSettings.Settings["FIB_ELYFile"].Value;
            cbbWLZ.Text = config.AppSettings.Settings["Stretch_Magnification"].Value;
            cbbWQGF.Text = config.AppSettings.Settings["Location_Magnification"].Value;
            cbbWQGD.Text = config.AppSettings.Settings["Location_Voltage"].Value;
            cbbWPZF.Text = config.AppSettings.Settings["Photograph_Magnification"].Value;
            cbbWPZD.Text = config.AppSettings.Settings["Photograph_Voltage"].Value;
            cbbWFIB.Text = config.AppSettings.Settings["FIB_Magnification"].Value;
            string Correction_Angle = config.AppSettings.Settings["Correction_Angle"].Value;
            if (Convert.ToBoolean(config.AppSettings.Settings["Is_Title"].Value))
            {
                cbbYDZZDX.Visible = true;
                label3.Visible = true;
            }
            else
            {
                cbbYDZZDX.Visible = false;
                label3.Visible = false;
            }
            if (Correction_Angle == "36")
            {
                cbbWXZ.SelectedIndex = 0;
            }
            else
            {
                cbbWXZ.SelectedIndex = 1;
            }
            cbbWYP.Text = config.AppSettings.Settings["SampleName"].Value;
            cbbWCS.Text = config.AppSettings.Settings["Firms"].Value;
        }

        /// <summary>
        /// 根据所选路径，读取模板文件
        /// </summary>
        public void ReadConfigInfo()
        {
            if (!ReadConfigPath.Equals(""))
            {
                ReloadConfig();
                ConfigFile cfm = new ConfigFile(new MeasureParam());
                cfm.Read(ReadConfigPath);
                chkWIsP.Checked = cfm.m_Config.Is_Photograph;
                chkWPT.Checked = cfm.m_Config.PT;
                //自动对焦模式
                //cfm.FocusMode = chkManul.Checked;
                txtWPTF.Text = cfm.m_Config.PTTemp;
                txtWFIBF.Text = cfm.m_Config.FIBTemp;
                cbbWLZ.Text = cfm.m_Config.Stretch_Magnification.ToString();
                cbbWQGF.Text = cfm.m_Config.Location_Magnification.ToString();
                cbbWQGD.Text = cfm.m_Config.Location_Voltage.ToString();
                cbbWPZF.Text = cfm.m_Config.Photograph_Magnification.ToString();
                cbbWPZD.Text = cfm.m_Config.Photograph_Voltage.ToString();
                cbbWFIB.Text = cfm.m_Config.FIB_Magnification.ToString();
                string Correction_Angle = cfm.m_Config.Correction_Angle.ToString();
                if (Correction_Angle == "36")
                {
                    cbbWXZ.SelectedIndex = 0;
                }
                else
                {
                    cbbWXZ.SelectedIndex = 1;
                }
                cbbWYP.Text = cfm.m_Config.SampleName;
                cbbWCS.Text = cfm.m_Config.Firm;
            }
        }

        /// <summary>
        /// 修改配置文件默认值
        /// </summary>
        /// <param name="sender"></param>
        /// <param name="e"></param>
        private void btnSaveDefalutPara_Click(object sender, EventArgs e)
        {
            if (Convert.ToInt32(cbbWFIB.Text) < 200)
            {
                MessageBox.Show("FIB最小放大倍数为200倍");
            }
            else
            {
                if (EditConfig())
                {
                    MessageBox.Show("保存成功！", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
                }
            }
        }
        #endregion

        #region 删除下拉菜单选择项

        private void DelComboBoxItem_Click(object sender, EventArgs e)
        {
            if (MessageBox.Show("是否删除所选项信息？", "提示", MessageBoxButtons.YesNo, MessageBoxIcon.Information) == DialogResult.Yes)
            {
                PictureBox pbDel = (PictureBox)sender;
                string ctrlName = pbDel.Name.Substring(5, pbDel.Name.Length - 5);
                if (DelComboBoxItem(ctrlName))
                {
                    //重新加载
                    ReloadConfig(); 
                }
            }
        }

        /// <summary>
        /// 删除下拉菜单选择项
        /// </summary>
        public bool DelComboBoxItem(string controlName)
        {
            string delName = controlName;
            foreach (Control item in this.Controls)
            {
                if (item is ComboBox)
                {
                    if (item.Name.Contains(delName))
                    {
                        ComboBox cb = (ComboBox)item;
                        return DelConfigNodeContentInfo(delName, cb.Text);
                    }
                }
            }
            return false;
        }
        #endregion

        #region 根据是否仅拍照，进行逻辑判断
        private void chkWIsP_CheckedChanged(object sender, EventArgs e)
        {
            if (chkWIsP.Checked)
            {
                chkWPT.Checked = false;
                chkWPT.Visible = false;
                label61.Visible = false;
                label59.Visible = false;
                txtWFIBF.Visible = false;
                txtWPTF.Visible = false;
                pbPTTemplateFile.Visible = false;
                pbFIBTemplateFile.Visible = false;
                label58.Visible = false;
                cbbWXZ.Visible = false;
                label2.Visible = false;
                cbbWFIB.Visible = false;
                FormHOZMainObject.m_MeasureType = (int)MeasureMsgManage.measureType.Photo;
            }
            else
            {
                chkWPT.Visible = true;
                label61.Visible = true;
                label59.Visible = true;
                txtWFIBF.Visible = true;
                txtWPTF.Visible = true;
                pbPTTemplateFile.Visible = true;
                pbFIBTemplateFile.Visible = true;
                label58.Visible = true;
                cbbWXZ.Visible = true;
                label2.Visible = true;
                cbbWFIB.Visible = true;
                if (!chkWPT.Checked)
                {
                    FormHOZMainObject.m_MeasureType = (int)MeasureMsgManage.measureType.FIB;
                }
            }
            CreateCutHoleList();
        }
        #endregion

        public MeasureParam GetMeasureParam()
        {
            MeasureParam cfm = new MeasureParam();

            //设置配置文件默认值
            bool bResult = false;

            bool.TryParse(config.AppSettings.Settings["Is_Photograph"].Value, out bResult);
            cfm.Is_Photograph = bResult;

            bool.TryParse(config.AppSettings.Settings["PT_Depostion"].Value, out bResult);
            cfm.PT = bResult;

            cfm.PTTemp = config.AppSettings.Settings["PT_ELYFile"].Value;
            cfm.FIBTemp = config.AppSettings.Settings["FIB_ELYFile"].Value;

            float fResult = (float)0.0;
            float.TryParse(config.AppSettings.Settings["Stretch_Magnification"].Value, out fResult);
            cfm.Stretch_Magnification = fResult;

            float.TryParse(config.AppSettings.Settings["Location_Magnification"].Value, out fResult);
            cfm.Location_Magnification = fResult;

            float.TryParse(config.AppSettings.Settings["Location_Voltage"].Value, out fResult);
            cfm.Location_Voltage = fResult;

            float.TryParse(config.AppSettings.Settings["Photograph_Magnification"].Value, out fResult);
            cfm.Photograph_Magnification = fResult;

            float.TryParse(config.AppSettings.Settings["Photograph_Voltage"].Value, out fResult);
            cfm.Photograph_Voltage = fResult;

            float.TryParse(config.AppSettings.Settings["Correction_Angle"].Value, out fResult);
            cfm.Correction_Angle = fResult;

            cfm.SampleName = config.AppSettings.Settings["SampleName"].Value;

            cfm.Firm = config.AppSettings.Settings["Firms"].Value;

            cfm.AutoFocus.UP = Convert.ToSingle(ConfigurationManager.AppSettings["Focus_UP"].ToString());
            cfm.AutoFocus.Down = Convert.ToSingle(ConfigurationManager.AppSettings["Focus_Down"].ToString());
            cfm.AutoFocus.Step = Convert.ToSingle(ConfigurationManager.AppSettings["Focus_Step"].ToString());
            cfm.AutoFocus.Range = Convert.ToSingle(ConfigurationManager.AppSettings["Focus_Range"].ToString());
            cfm.AutoFocus.fStep = Convert.ToSingle(ConfigurationManager.AppSettings["Focus_FStep"].ToString());

            cfm.FIBFocus.UP = Convert.ToSingle(ConfigurationManager.AppSettings["Focus_UP"].ToString());
            cfm.FIBFocus.Down = Convert.ToSingle(ConfigurationManager.AppSettings["Focus_Down"].ToString());
            cfm.FIBFocus.Step = Convert.ToSingle(ConfigurationManager.AppSettings["Focus_Step"].ToString());
            cfm.FIBFocus.Range = Convert.ToSingle(ConfigurationManager.AppSettings["Focus_Range"].ToString());
            cfm.FIBFocus.fStep = Convert.ToSingle(ConfigurationManager.AppSettings["Focus_FStep"].ToString());

            cfm.AutoStigX.UP = Convert.ToSingle(ConfigurationManager.AppSettings["Focus_UP"].ToString());
            cfm.AutoStigX.Down = Convert.ToSingle(ConfigurationManager.AppSettings["Focus_Down"].ToString());
            cfm.AutoStigX.Step = Convert.ToSingle(ConfigurationManager.AppSettings["Focus_Step"].ToString());
            cfm.AutoStigX.Range = Convert.ToSingle(ConfigurationManager.AppSettings["Focus_Range"].ToString());
            cfm.AutoStigX.fStep = Convert.ToSingle(ConfigurationManager.AppSettings["Focus_FStep"].ToString());

            cfm.AutoStigY.UP = Convert.ToSingle(ConfigurationManager.AppSettings["Focus_UP"].ToString());
            cfm.AutoStigY.Down = Convert.ToSingle(ConfigurationManager.AppSettings["Focus_Down"].ToString());
            cfm.AutoStigY.Step = Convert.ToSingle(ConfigurationManager.AppSettings["Focus_Step"].ToString());
            cfm.AutoStigY.Range = Convert.ToSingle(ConfigurationManager.AppSettings["Focus_Range"].ToString());
            cfm.AutoStigY.fStep = Convert.ToSingle(ConfigurationManager.AppSettings["Focus_FStep"].ToString());

            bool.TryParse(config.AppSettings.Settings["Is_Title"].Value, out bResult);
            cfm.Title = bResult;

            float.TryParse(config.AppSettings.Settings["ZDistance"].Value, out fResult);
            cfm.ZDistance = fResult;

            return cfm;
        }


        #region 创建切孔列表
        private void CreateCutHoleList()
        {
            List<CutHole> ListCutHole = FormHOZMainObject.m_MeasureFile.ListCutHole;
            FormHOZMainObject.CreateCutHoleList(ListCutHole);
        } 
        #endregion

        #region 设置流程类型
        private void chkWPT_CheckedChanged(object sender, EventArgs e)
        {
            if (chkWPT.Checked)
            {
                FormHOZMainObject.m_MeasureType = (int)MeasureMsgManage.measureType.PT;
            }
            else
            {
                if (!chkWIsP.Checked)
                {
                    FormHOZMainObject.m_MeasureType = (int)MeasureMsgManage.measureType.FIB;
                }
            }
            CreateCutHoleList();
        } 
        #endregion

        #region 关闭按钮 鼠标操作事件
        private void pbClose_MouseEnter(object sender, EventArgs e)
        {
            pbClose.BackgroundImage = global::HOZProject.Properties.Resources.exit_Red;
        }

        private void pbClose_MouseLeave(object sender, EventArgs e)
        {
            pbClose.BackgroundImage = global::HOZProject.Properties.Resources.exit_Gray;
        }
        #endregion

        #region 输入限制只能是数字
        private void ComboBox_KeyPress(string text, object sender, KeyPressEventArgs e)
        {

            //允许输入数字、小数点、删除键和负号  
            if ((e.KeyChar < 48 || e.KeyChar > 57) && e.KeyChar != 8 && e.KeyChar != (char)('.') && e.KeyChar != (char)('-'))
            {
                MessageBox.Show("请输入正确的数字");
                text = "";
                e.Handled = true;
            }
            if (e.KeyChar == (char)('-'))
            {
                if (text != "")
                {
                    MessageBox.Show("请输入正确的数字");
                    text = "";
                    e.Handled = true;
                }
            }
            //小数点只能输入一次  
            if (e.KeyChar == (char)('.') && ((ComboBox)sender).Text.IndexOf('.') != -1)
            {
                MessageBox.Show("请输入正确的数字");
                text = "";
                e.Handled = true;
            }
            //第一位不能为小数点  
            if (e.KeyChar == (char)('.') && ((ComboBox)sender).Text == "")
            {
                MessageBox.Show("请输入正确的数字");
                text = "";
                e.Handled = true;
            }
            //第一位是0，第二位必须为小数点  
            if (e.KeyChar != (char)('.') && ((ComboBox)sender).Text == "0")
            {
                MessageBox.Show("请输入正确的数字");
                text = "";
                e.Handled = true;
            }
            //第一位是负号，第二位不能为小数点  
            if (((ComboBox)sender).Text == "-" && e.KeyChar == (char)('.'))
            {
                MessageBox.Show("请输入正确的数字");
                text = "";
                e.Handled = true;
            }
        }

        private void cbbWPZD_KeyPress(object sender, KeyPressEventArgs e)
        {
            ComboBox_KeyPress(cbbWPZD.Text, sender, e);
        }

        private void cbbWPZF_KeyPress(object sender, KeyPressEventArgs e)
        {
            ComboBox_KeyPress(cbbWPZF.Text, sender, e);
        }

        private void cbbWQGD_KeyPress(object sender, KeyPressEventArgs e)
        {
            ComboBox_KeyPress(cbbWQGD.Text, sender, e);
        }

        private void cbbWQGF_KeyPress(object sender, KeyPressEventArgs e)
        {
            ComboBox_KeyPress(cbbWQGF.Text, sender, e);
        }

        private void cbbWLZ_KeyPress(object sender, KeyPressEventArgs e)
        {
            ComboBox_KeyPress(cbbWLZ.Text, sender, e);
        }

        private void cbbWFIB_KeyPress(object sender, KeyPressEventArgs e)
        {
            ComboBox_KeyPress(cbbWFIB.Text, sender, e);
        }
        #endregion

        private void chkWqxkc_CheckedChanged(object sender, EventArgs e)
        {
            if (chkWqxkc.Checked) 
            {
                label3.Visible = true;
                cbbYDZZDX.Visible = true;
            }
            else
            {
                label3.Visible = false;
                cbbYDZZDX.Visible = false;
            }
        }



        private void cbbYDZZDX_TextChanged(object sender, EventArgs e)
        {
            if (cbbYDZZDX.Text!="")
            {
                if (Convert.ToSingle(cbbYDZZDX.Text)>40)
                {
                  MessageBox.Show("数值最大为40");
                  cbbYDZZDX.Text = "40";
                  }
            }
            else
            {
                cbbYDZZDX.Text = "0";
            }
            
        }

        private void cbbYDZZDX_KeyPress(object sender, KeyPressEventArgs e)
        {
            if (((int)e.KeyChar < 48 || (int)e.KeyChar > 57) && (int)e.KeyChar != 8 && (int)e.KeyChar != 46)
            {
                e.Handled = true;
            }
        }
    }
}