HOZ/HOZProject/App.config

<?xml version="1.0" encoding="utf-8"?>
<configuration>
    <startup> 
        <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.6.2"/>
    </startup>
    <appSettings>
      <!--厂商_数据源-->
      <add key="Firms" value="Noah-BOE,LG,SDC,Ocean-BOE"/>

      
      <!--PT使用的ELY文件-->
      <add key="PT_ELYFile" value=""/>
      <!--FIB使用的ELY文件-->
      <add key="FIB_ELYFile" value=""/>

   
      <!--样品类型-->
      <add key="LastSampleType" value="1"/>
      <!--厂商-->
      <add key="LastSelectFirm" value="Ocean-BOE"/>
      <!--是否倾斜样品台-->
      <add key="Is_Title" value="True"/>
      <!--是否仅拍照-->
      <add key="Is_Photograph" value="False"/>
      <!--是否PT沉积-->
      <add key="PT_Depostion" value="False"/>
      <!--是否能谱测量-->
      <add key="Is_EDS" value="True"/>
      <!--能谱移动Z轴位置-->
      <add key="EDS_Z" value="37.241"/>
      <!--能谱电压设置值-->
      <add key="EDS_V" value="7000"/>
      <!--能谱电流设置值-->
      <add key="EDS_A" value="0.5"/>
      <!--能谱Xray Mode 0:point mode 1: line mode 2: area mode-->
      <add key="EDS_XrayMode" value="1"/>
    
  
      <!--ScanRotate角度补偿参数-->
      <add key="ScanRotCur" value="1"/>
      <!--Title角度补偿后Y轴方向PixelSize修正值-->
      <add key="PixelSize_Y_Cur" value="1.236"/>
      
      
      
      <!--图像接口模式,人工干预-1，自动运算-2-->
      <add key="Hand_Intervene" value="2"/>

      <!--远程IP地址-->
      <add key="WebServerIP" value="127.0.0.1"/>
      <!--远程IP端口-->
      <add key="WebServerPort" value="8009"/>
      <!--远程算法地址-->
      <add key="WebServerUrl" value="FIB_degree_recognize,FIB_cal_cut_location,FIB_verify,FIB_cut_center_location,FIB_sharpness,FIB_sharpness,FIB_degree_recognize_trap,FIB_measure_location,FIB_measure_parameter,FIB_EDS_points,FIB_EDS_lines,FIB_EDS_areas"/>


      
     

      <add key="RemoteELYPath" value="\\192.168.1.101\Carl Zeiss\SmartFIB\API\Drop\"/>
      <add key="RemoteMLFPath" value="\\192.168.1.101\Carl Zeiss\SmartSEM\User\Service\"/>


     
      
      <!--add by sun 2020-12-17 增加调试时是否切割开关-->
      <add key="IsCutingForDebug" value="true"/>
      <!--add by sun 2020-12-17 增加调试时是否切割开关-->

      <!--add by zjx 2020-12-18 为了测试只做能谱部分-->
      <add key="IsonlyEDSForDebug" value="true"/>
      <!--add by zjx 2020-12-18 为了测试只做能谱部分-->
      
      


     
    </appSettings>
  <runtime>
    <assemblyBinding xmlns=" urn:schemas-microsoft-com:asm.v1">
      <dependentAssembly>
        <assemblyIdentity name="Newtonsoft.Json" culture="neutral" publicKeyToken="30ad4fe6b2a6aeed" />
        <bindingRedirect oldVersion="0.0.0.0-12.0.0.0" newVersion="10.0.0.0" />
      </dependentAssembly>
    </assemblyBinding>
  </runtime>
</configuration>