HOZ/HOZProject/UserControls/UControl_Init.cs

using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Drawing;
using System.Data;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Windows.Forms;
using MeasureData;
using System.Configuration;
using FileManager;
using System.IO;
using System.Runtime.InteropServices;

//20201029：注释
//初始化窗口管理的是参数，包括，测量文件使用的参数，配置文件中的参数（默认参数），或者保存成参数文件。
//初始化窗口中显示的参数是测量文件在使用的参数。
//点击确认，对当前修改的参数保存到测量文件中去。
//点击保存默认设置，当前修改的参数保存到AppConfig中，下次打开时作为默认值打开。
//点击保存成配置文件，将以文件的形式将参数保存在文件中
//参数又分为两种类型，客户操作可见的类型，在AppConfig中参数，
//客户操作的参数，可以每次都针对测量进行修改
//这类参数包括：
//是否是倾斜的样品台
//是否仅拍照
//是否使用PT
//PT加工文件
//FIB加工文件
//样品名称
//厂商
//拉直操作的放大倍数
//定位的电压
//定位的放大倍数
//拍照的电压
//拍照的放大倍数
//AppConfig中的参数，通常不需要修改，每次修改要在配置文件中修改，要重新启动程序
//这类参数包括：
//四组对焦参数
//Z轴的移动距离
//各个参数需要有一系列的默认值，并且各个值可以修改，删除

namespace HOZProject
{
    public partial class UControl_Init : UserControl
    {
        #region 成员变量

        //可供选择的各个参数的值列表
        String[] sT;//样品类型列表
        String[] firms;//厂商列表
        String[] WPZD;//拍照电压列表
        String[] WPZF;//拍照放大倍数列表
        String[] WQGD;//定位电压列表
        String[] WQGF;//定位电压放大倍数列表
        String[] WLZ;//拉直电压列表
        String[] WFIB;//FIB电压列表

        //配置文件
        Configuration config = ConfigurationManager.OpenExeConfiguration(ConfigurationUserLevel.None);

        //依附与主工作窗口
        private FormHOZMain formHOZMain;
        public FormHOZMain FormHOZMainObject { get => formHOZMain; set => formHOZMain = value; }
        
        //模板路径
        private string readConfigPath;
        public string ReadConfigPath { get => readConfigPath; set => readConfigPath = value; }
        
        //模板文件默认路径
        private string m_TemplateFilePath;
        #endregion

        #region 构造方法
        public UControl_Init(FormHOZMain formHOZ)
        {
            InitializeComponent();
            FormHOZMainObject = formHOZ;
        }
        #endregion

        #region 窗体加载
        private void UControl_Init_Load(object sender, EventArgs e)
        {
            //从配置文件中读取一系列的信息
            //ReloadConfig();
            if (!chkFIBAdjust.Checked)
            {
                chkFIBAtuoAdjust.Checked = false;
                chkFIBAtuoAdjust.Visible = false;
            }
            if (chkFIBAtuoAdjust.Checked)
            {
                label4.Visible = false;
                tbBrightness.Visible = false;
                label7.Visible = false;
                label5.Visible = false;
                tbContrast.Visible = false;
                label8.Visible = false;
            }
            else
            {
                label4.Visible = true;
                tbBrightness.Visible = true;
                label7.Visible = true;
                label5.Visible = true;
                tbContrast.Visible = true;
                label8.Visible = true;
            }
            SetTypel();
        } 
        #endregion

        #region 关闭窗体
        private void btnClose_Click(object sender, EventArgs e)
        {
            //按照当前的值，更新测量文件的参数
            SaveMeasureFile();

            Form fParent = this.ParentForm;
            fParent.Close();
        }
        #endregion

        #region 加载切孔文件，生成切孔列表
        private void btnCutHoleFile_Click(object sender, EventArgs e)
        {
            try
            {
                if (FormHOZMainObject.m_MeasureFile == null)
                {
                    MessageBox.Show("请新建一个测量文件！", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
                }
                else
                {
                    if (!FormHOZMainObject.m_MeasureFile.GetCutHolesFromFile(""))
                    {
                        MessageBox.Show("导入切孔失败！", "提示", MessageBoxButtons.OK, MessageBoxIcon.Warning);
                    }
                    else
                    {
                        List<CutHole> ListCutHole = FormHOZMainObject.m_MeasureFile.ListCutHole;
                        //文件路径
                        string CutHoleFilePath = FormHOZMainObject.m_MeasureFile.CutHoleFilePath;
                        FormHOZMainObject.CreateCutHoleList(ListCutHole);
                        //显示导入的切孔数量
                        lblCutHoleCount.Text = string.Format("成功导入{0}个切孔", ListCutHole.Count);
                        tbCutHoleFilePath.Text = CutHoleFilePath;
                        //保存测量文件
                        if (Directory.Exists(FormHOZMainObject.m_MeasureFile.FilePath))
                        {
                            FormHOZMainObject.m_MeasureFile.Save();
                        }
                    }
                }
            }
            catch (Exception ex)
            {
                LogManager.LogError(ex.Message);
            }
        }
        private void pbCutHoleFile_Click(object sender, EventArgs e)
        {
           
        }
        #endregion

        #region 根据一个切孔文件,自动计算其他切孔信息
        /// <summary>
        /// 根据一个切孔,自动计算其他切孔信息
        /// </summary>
        /// <param name="sender"></param>
        /// <param name="e"></param>
        /// 
        private void btnCutHoleAuto_Click(object sender, EventArgs e)
        {
            try
            {
                if (FormHOZMainObject.m_MeasureFile == null)
                {
                    MessageBox.Show("请新建一个测量文件！", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
                }
                else
                {
                    if (!FormHOZMainObject.m_MeasureFile.GetCutHolesFromFile(""))
                    {
                        MessageBox.Show("导入切孔失败！", "提示", MessageBoxButtons.OK, MessageBoxIcon.Warning);
                    }
                    else
                    {
                        List<CutHole> ListCutHole = FormHOZMainObject.m_MeasureFile.ListCutHole;
                        if (ListCutHole != null)
                        {
                            if (ListCutHole.Count > 0)
                            {
                                //根据切孔文件的一个切孔，自动计算其他切孔位置
                                float centerX = 65;
                                float centerY = 65;
                                float firstX = ListCutHole[0].Position.X;
                                float firstY = ListCutHole[0].Position.Y;
                                //距离
                                float distance = Convert.ToSingle(config.AppSettings.Settings["distance"].Value.ToString());
                                //矩阵 4*4
                                int rag = Convert.ToInt32(config.AppSettings.Settings["rag"].Value.ToString());
                                List<PointF> cutHolePoint = new List<PointF>();
                                //根据一个切孔点计算其他切孔信息
                                cutHolePoint = AnalysisPosition(centerX, centerY, firstX, firstY, distance, rag);
                                if (!FormHOZMainObject.m_MeasureFile.GetCutHolesFromAnalysisPosition(cutHolePoint))
                                {
                                    MessageBox.Show("生成切孔失败！", "提示", MessageBoxButtons.OK, MessageBoxIcon.Warning);
                                }
                                else
                                {
                                    //文件路径
                                    string CutHoleFilePath = FormHOZMainObject.m_MeasureFile.CutHoleFilePath;
                                    //重新获取切孔列表信息
                                    ListCutHole = FormHOZMainObject.m_MeasureFile.ListCutHole;
                                    //创建切孔列表信息
                                    FormHOZMainObject.CreateCutHoleList(ListCutHole);
                                    //显示导入的切孔数量
                                    lblCutHoleCount.Text = string.Format("成功生成{0}个切孔", ListCutHole.Count);
                                    tbCutHoleFilePath.Text = CutHoleFilePath;
                                }
                            }
                        }
                        //保存测量文件
                        if (FormHOZMainObject.IsSave)
                        {
                            FormHOZMainObject.m_MeasureFile.Save();
                        }
                    }
                }
            }
            catch (Exception ex)
            {
                LogManager.LogError(ex.Message);
            }
        }
        private void pbCutHoleAuto_Click(object sender, EventArgs e)
        {
           
        }

        /// <summary>
        /// 分析点坐标
        /// </summary>
        /// <param name="centerX">中心点X轴坐标</param>
        /// <param name="centerY">中心点Y轴坐标</param>
        /// <param name="firstX">第一个点X轴坐标</param>
        /// <param name="firstY">第一个点Y轴坐标</param>
        /// <param name="distance">点与点的距离</param>
        /// <param name="rag">行、列数</param>
        /// <param name="ptsx">计算生成所有X轴坐标</param>
        /// <param name="ptsy">计算生成所有Y轴坐标</param>
        public List<PointF> AnalysisPosition(float centerX, float centerY, float firstX, float firstY, float distance, int rag)
        {
            //求样品1的水平角度
            double angle = 0;

            //清空所有点信息
            List<float> ptsx = new List<float>();
            List<float> ptsy = new List<float>();
            //将第一个点加入到点信息中
            ptsx.Add(firstX);
            ptsy.Add(firstY);

            //计算第一个点与X轴的交角度数
            angle = Math.Atan2(ptsy[0] - centerY, centerX - ptsx[0]) * 180 / Math.PI;

            //这里是求与第一个点横向排列的其他点的移动角度
            //就是按45度向左向右移动的度
            angle = 45 - angle;
            angle = angle * Math.PI / 180;

            float tx = 0;
            float ty = 0;
            for (int j = 0; j < rag; j++)
            {
                //计算每行第一个点的坐标
                if (j > 0)
                {
                    tx = (float)(distance * j * Math.Sin(angle));
                    ty = (float)(distance * j * Math.Cos(angle));
                    ptsx.Add(tx + ptsx[0]);
                    ptsy.Add(ptsy[0] - ty);
                }
                //计算每行其他点的坐标
                for (int i = 1; i < rag; i++)
                {
                    tx = (float)(distance * i * Math.Cos(angle));
                    ty = (float)(distance * i * Math.Sin(angle));
                    ptsx.Add(tx + ptsx[j * rag]);
                    ptsy.Add(ty + ptsy[j * rag]);
                }
            }
            List<PointF> pts = new List<PointF>();
            for (int i = 0; i < ptsx.Count; i++)
            {
                //增加的点
                PointF pf = new PointF();
                pf.X = ptsx[i];
                pf.Y = ptsy[i];
                pts.Add(pf);
            }
            return pts;
        }
        #endregion

        #region 加载PT模板文件
        private void btnPTTemplateFile_Click(object sender, EventArgs e)
        {
            string FilePathName;
            string fileNameWithoutExtension;
            //新建一个文件对话框
            OpenFileDialog pOpenFileDialog = new OpenFileDialog();
            //设置对话框标题
            pOpenFileDialog.Title = "选择模板文件";
            //默认目录
            pOpenFileDialog.InitialDirectory= @"\\192.168.1.101\fib auto\FIB Recipe\";
            //设置打开文件类型
            pOpenFileDialog.Filter = "ely文件（*.ely）|*.ely";
            ////监测文件是否存在
            //pOpenFileDialog.CheckFileExists = true;

            //文件打开后执行以下程序
            if (pOpenFileDialog.ShowDialog() == DialogResult.OK)
            {
                FilePathName = System.IO.Path.GetFullPath(pOpenFileDialog.FileName);  //绝对路径
                fileNameWithoutExtension = System.IO.Path.GetFileNameWithoutExtension(FilePathName);
                this.txtWPTF.Text = FilePathName;
            }
        }
        private void pbTemplateFile_Click(object sender, EventArgs e)
        {
           
        }
        #endregion

        #region 加载FIB模板文件
        private void btnFIBTemplateFile_Click(object sender, EventArgs e)
        {
            string FilePathName;
            string fileNameWithoutExtension;
            //新建一个文件对话框
            OpenFileDialog pOpenFileDialog = new OpenFileDialog();
            //设置对话框标题
            pOpenFileDialog.Title = "选择模板文件";
            //默认目录
            pOpenFileDialog.InitialDirectory = @"\\192.168.1.101\fib auto\FIB Recipe\";
            //设置打开文件类型
            pOpenFileDialog.Filter = "ely文件（*.ely）|*.ely";
            ////监测文件是否存在
            //pOpenFileDialog.CheckFileExists = true;
            //文件打开后执行以下程序
            if (pOpenFileDialog.ShowDialog() == DialogResult.OK)
            {
                FilePathName = System.IO.Path.GetFullPath(pOpenFileDialog.FileName);  //绝对路径
                fileNameWithoutExtension = System.IO.Path.GetFileNameWithoutExtension(FilePathName);
                this.txtWFIBF.Text = FilePathName;
            }
        }
        private void pbFIBTemplateFile_Click(object sender, EventArgs e)
        {
           
        }
        #endregion

        #region 创建与读取样品参数、配置文件
        private void btnCreateConfig_Click(object sender, EventArgs e)
        {
            SaveTemplateFile();
        }
        /// <summary>
        /// 获取测量参数，初始化窗体中的控件信息
        /// </summary>   
        /// <returns></returns>
        public MeasureParam GetMeasureParamInfo()
        {
            //从当前界面内获取参数
            MeasureParam cfm = new MeasureParam();
            cfm.Is_Photograph = chkWIsP.Checked;//是否仅拍照
            cfm.PT = chkWPT.Checked;//是否有PT
            cfm.Tilt = chkWqxkc.Checked;//是否倾斜样品台
            cfm.EDS = chkEDS.Checked;
            cfm.EDSZ = Convert.ToSingle(txtEDSZ.Text)/1000;
            cfm.EDSV = Convert.ToSingle(cbbEDSV.Text);
            cfm.EDSA = Convert.ToSingle(cbbEDSA.Text)/1000000000;
            //自动对焦模式
            //cfm.FocusMode = chkManul.Checked;
            cfm.PTTemp = txtWPTF.Text;//PT文件路径
            cfm.FIBTemp = txtWFIBF.Text;//FIB文件路径
            cfm.Stretch_Magnification = Convert.ToSingle(cbbWLZ.Text);//来自放大倍数
            cfm.Location_Magnification = Convert.ToSingle(cbbWQGF.Text);//定位的放大倍数
            cfm.Location_Voltage = Convert.ToSingle(cbbWQGD.Text);//定位的放大电压
            cfm.Photograph_Magnification = Convert.ToSingle(cbbWPZF.Text);//拍照的放大倍数
            cfm.Photograph_Voltage = Convert.ToSingle(cbbWPZD.Text);//拍照的电压
            //cfm.FIB_Magnification = Convert.ToSingle(cbbWFIB.Text);//FIB的放大倍数

            //亮度对比度
            cfm.FIBDo = chkFIBAdjust.Checked;
            cfm.FIBAutoBC = chkFIBAtuoAdjust.Checked;
            cfm.FIBB = Convert.ToSingle(tbBrightness.Text);
            cfm.FIBC = Convert.ToSingle(tbContrast.Text);

            //放大倍数挡位
            cfm.MagComp = Convert.ToBoolean(chkGearSwitch.Checked);
            cfm.MagRange1 = Convert.ToSingle(tbGear1to2.Text);
            cfm.MagRange2 = Convert.ToSingle(tbGear2to3.Text);
            cfm.MagRange3 = Convert.ToSingle(tbGear3to4.Text);
            cfm.MagCompX1 = Convert.ToSingle(tbGear1to2_Xdeviation.Text);
            cfm.MagCompX2 = Convert.ToSingle(tbGear2to3_Xdeviation.Text);
            cfm.MagCompX3 = Convert.ToSingle(tbGear3to4_Xdeviation.Text);
            cfm.MagCompY1 = Convert.ToSingle(tbGear1to2_Ydeviation.Text);
            cfm.MagCompY2 = Convert.ToSingle(tbGear2to3_Ydeviation.Text);
            cfm.MagCompY3 = Convert.ToSingle(tbGear3to4_Ydeviation.Text);

            cfm.ScanRotCor = Convert.ToSingle(txtScanRotCur.Text);
            cfm.PixelSizeCor = Convert.ToSingle(txtYPSCur.Text);

            if (cbbWXZ.SelectedIndex == 0)//校正角度
            {
                cfm.Correction_Angle = 36;
            }
            else
            {
                cfm.Correction_Angle = 54;
            }

            cfm.SampleName = cbbWYP.Text;//样品类型
            cfm.Firm = cbbWCS.Text;//厂商类型
            return cfm;
        }

        public void SaveTemplateFile()
        {
            //获取当前文件的参数
            MeasureParam cfm = FormHOZMainObject.m_MeasureFile.MParam;
            
            //根据界面显示内容更新参数
            cfm.Is_Photograph = chkWIsP.Checked;
            cfm.PT = chkWPT.Checked;
            cfm.Tilt = chkWqxkc.Checked;//是否倾斜样品台
            cfm.EDS = chkEDS.Checked;
            //自动对焦模式
            //cfm.FocusMode = chkManul.Checked;
            cfm.PTTemp = txtWPTF.Text;
            cfm.FIBTemp = txtWFIBF.Text;
            cfm.Stretch_Magnification = Convert.ToSingle(cbbWLZ.Text);
            cfm.Location_Magnification = Convert.ToSingle(cbbWQGF.Text);
            cfm.Location_Voltage = Convert.ToSingle(cbbWQGD.Text);
            cfm.Photograph_Magnification = Convert.ToSingle(cbbWPZF.Text);
            cfm.Photograph_Voltage = Convert.ToSingle(cbbWPZD.Text);
            //cfm.FIB_Magnification = Convert.ToSingle(cbbWFIB.Text);
            if (cbbWXZ.SelectedIndex == 0)
            {
                cfm.Correction_Angle = 36;
            }
            else
            {
                cfm.Correction_Angle = 54;
            }

            cfm.SampleName = cbbWYP.Text;
            cfm.Firm = cbbWCS.Text;

            //保存配置文件中的参数
            cfm.ZDistance = Convert.ToSingle(ConfigurationManager.AppSettings["ZDistance"].ToString());

            cfm.AutoFocus.UP = Convert.ToSingle(ConfigurationManager.AppSettings["Focus_UP"].ToString());
            cfm.AutoFocus.Down = Convert.ToSingle(ConfigurationManager.AppSettings["Focus_Down"].ToString());
            cfm.AutoFocus.Step = Convert.ToSingle(ConfigurationManager.AppSettings["Focus_Step"].ToString());
            cfm.AutoFocus.Range = Convert.ToSingle(ConfigurationManager.AppSettings["Focus_Range"].ToString());
            cfm.AutoFocus.fStep = Convert.ToSingle(ConfigurationManager.AppSettings["Focus_FStep"].ToString());

            cfm.FIBFocus.UP = Convert.ToSingle(ConfigurationManager.AppSettings["FIB_UP"].ToString());
            cfm.FIBFocus.Down = Convert.ToSingle(ConfigurationManager.AppSettings["FIB_Down"].ToString());
            cfm.FIBFocus.Step = Convert.ToSingle(ConfigurationManager.AppSettings["FIB_Step"].ToString());
            cfm.FIBFocus.Range = Convert.ToSingle(ConfigurationManager.AppSettings["FIB_Range"].ToString());
            cfm.FIBFocus.fStep = Convert.ToSingle(ConfigurationManager.AppSettings["FIB_FStep"].ToString());

            cfm.AutoStigX.UP = Convert.ToSingle(ConfigurationManager.AppSettings["StigX_UP"].ToString());
            cfm.AutoStigX.Down = Convert.ToSingle(ConfigurationManager.AppSettings["StigX_Down"].ToString());
            cfm.AutoStigX.Step = Convert.ToSingle(ConfigurationManager.AppSettings["StigX_Step"].ToString());
            cfm.AutoStigX.Range = Convert.ToSingle(ConfigurationManager.AppSettings["StigX_Range"].ToString());
            cfm.AutoStigX.fStep = Convert.ToSingle(ConfigurationManager.AppSettings["StigX_FStep"].ToString());

            cfm.AutoStigY.UP = Convert.ToSingle(ConfigurationManager.AppSettings["StigY_UP"].ToString());
            cfm.AutoStigY.Down = Convert.ToSingle(ConfigurationManager.AppSettings["StigY_Down"].ToString());
            cfm.AutoStigY.Step = Convert.ToSingle(ConfigurationManager.AppSettings["StigY_Step"].ToString());
            cfm.AutoStigY.Range = Convert.ToSingle(ConfigurationManager.AppSettings["StigY_Range"].ToString());
            cfm.AutoStigY.fStep = Convert.ToSingle(ConfigurationManager.AppSettings["StigY_FStep"].ToString());


            ConfigFile cf = new ConfigFile(cfm);

            m_TemplateFilePath = ConfigurationManager.AppSettings["TemplateFilePath"].ToString();

            //如果路径不存在，要求选择一个路径
            if (!Directory.Exists(m_TemplateFilePath))
            {
                //创建路径
                //Directory.CreateDirectory(m_TemplateFilePath);
                FolderBrowserDialog dialog = new FolderBrowserDialog();
                dialog.Description = "请选择文件路径";
                //dialog.RootFolder = Environment.SpecialFolder.Programs;
                if (dialog.ShowDialog() == DialogResult.OK)
                {
                    m_TemplateFilePath = dialog.SelectedPath;
                    config.AppSettings.Settings["TemplateFilePath"].Value = m_TemplateFilePath;
                    config.Save(ConfigurationSaveMode.Modified);
                    ConfigurationManager.RefreshSection("appSettings");//重新加载新的配置文件
                }
            }


            SaveFileDialog saveFileDialog = new SaveFileDialog();
            //设置默认打开路径(绝对路径)
            saveFileDialog.InitialDirectory = m_TemplateFilePath;
            saveFileDialog.Filter = "样品参数文件|*.cfg";
            if (saveFileDialog.ShowDialog() == DialogResult.OK)
            {
                cf.Save(saveFileDialog.FileName);
            }
            else
            {
                return;
            }
            //编辑Config文件
            EditConfig();
        }
        /// <summary>
        /// 编辑confing 文件信息
        /// </summary>
        public bool EditConfig()
        {
            try
            {
                //设置数据源信息
                //样品类型
                List<String> _sT = sT.ToList();
                if ((_sT.IndexOf(cbbWYP.Text) < 0)
                     || (!_sT.Contains(cbbWYP.Text)))
                {
                    _sT.Add(cbbWYP.Text);
                    string wsT = string.Join(",", _sT.ToArray());
                    config.AppSettings.Settings["Sample_Type"].Value = wsT;
                }
                //厂商
                List<String> _firms = firms.ToList();
                if ((_firms.IndexOf(cbbWCS.Text) < 0)
                     || (!_firms.Contains(cbbWCS.Text)))
                {
                    _firms.Add(cbbWCS.Text);
                    string wFirms = string.Join(",", _firms.ToArray());
                    config.AppSettings.Settings["Firm"].Value = wFirms;
                }
                //拍照电压
                List<String> _WPZD = WPZD.ToList();
                if ((_WPZD.IndexOf(cbbWPZD.Text) < 0)
                     || (!_WPZD.Contains(cbbWPZD.Text)))
                {
                    _WPZD.Add(cbbWPZD.Text);
                    string wWPZD = string.Join(",", _WPZD.ToArray());
                    config.AppSettings.Settings["WPZD"].Value = wWPZD;
                }
                //拍照放大位数
                List<String> _WPZF = WPZF.ToList();
                if ((_WPZF.IndexOf(cbbWPZF.Text) < 0)
                     || (!_WPZF.Contains(cbbWPZF.Text)))
                {
                    _WPZF.Add(cbbWPZF.Text);
                    string wWPZF = string.Join(",", _WPZF.ToArray());
                    config.AppSettings.Settings["WPZF"].Value = wWPZF;
                }
                //定位切割电压
                List<String> _WQGD = WQGD.ToList();
                if ((_WQGD.IndexOf(cbbWQGD.Text) < 0)
                     || (!_WQGD.Contains(cbbWQGD.Text)))
                {
                    _WQGD.Add(cbbWQGD.Text);
                    string wWQGD = string.Join(",", _WQGD.ToArray());
                    config.AppSettings.Settings["WQGD"].Value = wWQGD;
                }
                //定位切割放大位数
                List<String> _WQGF = WQGF.ToList();
                if ((_WQGF.IndexOf(cbbWQGF.Text) < 0)
                    || (!_WQGF.Contains(cbbWQGF.Text)))
                {
                    _WQGF.Add(cbbWQGF.Text);
                    string wWQGF = string.Join(",", _WQGF.ToArray());
                    config.AppSettings.Settings["WQGF"].Value = wWQGF;
                }
                //拉直操作放大位数
                List<String> _WLZ = WLZ.ToList();
                if ((_WLZ.IndexOf(cbbWLZ.Text) < 0)
                     || (!_WLZ.Contains(cbbWLZ.Text)))
                {
                    _WLZ.Add(cbbWLZ.Text);
                    string wWLZ = string.Join(",", _WLZ.ToArray());
                    config.AppSettings.Settings["WLZ"].Value = wWLZ;
                }
                //ScanRotate修正
                config.AppSettings.Settings["ScanRotCur"].Value = txtScanRotCur.Text;
                config.AppSettings.Settings["PixelSize_Y_Cur"].Value = txtYPSCur.Text;
                //FIB放大位数
                //List<String> _WFIB = WFIB.ToList();
                //if ((_WFIB.IndexOf(cbbWFIB.Text) < 0) 
                //    ||(!_WFIB.Contains(cbbWFIB.Text)))
                //{
                //    _WFIB.Add(cbbWFIB.Text);
                //    string wWFIB = string.Join(",", _WFIB.ToArray());
                //    config.AppSettings.Settings["WFIB"].Value = wWFIB;
                //}               

                MeasureParam cfm = new MeasureParam();
                cfm = FormHOZMainObject.m_MeasureFile.MParam;
                cfm.Is_Photograph = chkWIsP.Checked;

                cfm.FocusMode = Convert.ToInt32(config.AppSettings.Settings["Focus_Mode"].Value);
                cfm.PT = chkWPT.Checked;
                //EDS
                cfm.EDS = chkEDS.Checked;
                config.AppSettings.Settings["Is_EDS"].Value = chkEDS.Checked.ToString();
                cfm.EDSZ = Convert.ToSingle(txtEDSZ.Text)/1000;
                config.AppSettings.Settings["EDS_Z"].Value = txtEDSZ.Text;
                cfm.EDSV = Convert.ToSingle(cbbEDSV.Text);
                config.AppSettings.Settings["EDS_V"].Value = cbbEDSV.Text;
                cfm.EDSA = Convert.ToSingle(cbbEDSA.Text) / 1000000000;
                config.AppSettings.Settings["EDS_A"].Value = cbbEDSA.Text;

                //自动对焦模式
                //cfm.FocusMode = chkManul.Checked;
                cfm.PTTemp = txtWPTF.Text;
                cfm.FIBTemp = txtWFIBF.Text;
                cfm.Stretch_Magnification = Convert.ToSingle(cbbWLZ.Text);
                cfm.Location_Magnification = Convert.ToSingle(cbbWQGF.Text);
                cfm.Location_Voltage = Convert.ToSingle(cbbWQGD.Text);
                cfm.Photograph_Magnification = Convert.ToSingle(cbbWPZF.Text);
                cfm.Photograph_Voltage = Convert.ToSingle(cbbWPZD.Text);
                //cfm.FIB_Magnification = Convert.ToSingle(cbbWFIB.Text);

                //亮度对比度
                cfm.FIBDo = chkFIBAdjust.Checked;
                cfm.FIBAutoBC = chkFIBAtuoAdjust.Checked;
                cfm.FIBB = Convert.ToSingle(tbBrightness.Text);
                cfm.FIBC = Convert.ToSingle(tbContrast.Text);

                //放大倍数挡位
                cfm.MagComp = Convert.ToBoolean(chkGearSwitch.Checked);
                cfm.MagRange1 = Convert.ToSingle(tbGear1to2.Text);
                cfm.MagRange2 = Convert.ToSingle(tbGear2to3.Text);
                cfm.MagRange3 = Convert.ToSingle(tbGear3to4.Text);
                cfm.MagCompX1 = Convert.ToSingle(tbGear1to2_Xdeviation.Text);
                cfm.MagCompX2 = Convert.ToSingle(tbGear2to3_Xdeviation.Text);
                cfm.MagCompX3 = Convert.ToSingle(tbGear3to4_Xdeviation.Text);
                cfm.MagCompY1 = Convert.ToSingle(tbGear1to2_Ydeviation.Text);
                cfm.MagCompY2 = Convert.ToSingle(tbGear2to3_Ydeviation.Text);
                cfm.MagCompY3 = Convert.ToSingle(tbGear3to4_Ydeviation.Text);

                //倾斜观测
                cfm.Tilt = chkWqxkc.Checked;
                //移动Z轴大小
                cfm.PixelSizeCor = Convert.ToSingle(txtYPSCur.Text);

                if (cbbWXZ.SelectedIndex == 0)
                {
                    cfm.Correction_Angle = 36;
                }
                else
                {
                    cfm.Correction_Angle = 54;
                }

                cfm.SampleName = cbbWYP.Text;
                cfm.Firm = cbbWCS.Text;

                //设置配置文件默认值
                config.AppSettings.Settings["Is_FIBDo"].Value = cfm.FIBDo.ToString();
                config.AppSettings.Settings["Is_FIBAutoBc"].Value = cfm.FIBAutoBC.ToString();
                config.AppSettings.Settings["FIBB"].Value = cfm.FIBB.ToString();
                config.AppSettings.Settings["FIBC"].Value = cfm.FIBC.ToString();

                config.AppSettings.Settings["MagComp"].Value = cfm.MagComp.ToString();
                config.AppSettings.Settings["MagRange1"].Value = cfm.MagRange1.ToString();
                config.AppSettings.Settings["MagRange2"].Value = cfm.MagRange2.ToString();
                config.AppSettings.Settings["MagRange3"].Value = cfm.MagRange3.ToString();
                config.AppSettings.Settings["MagCompX1"].Value = cfm.MagCompX1.ToString();
                config.AppSettings.Settings["MagCompX2"].Value = cfm.MagCompX2.ToString();
                config.AppSettings.Settings["MagCompX3"].Value = cfm.MagCompX3.ToString();
                config.AppSettings.Settings["MagCompY1"].Value = cfm.MagCompY1.ToString();
                config.AppSettings.Settings["MagCompY2"].Value = cfm.MagCompY2.ToString();
                config.AppSettings.Settings["MagCompY3"].Value = cfm.MagCompY3.ToString();

                config.AppSettings.Settings["Is_Photograph"].Value = cfm.Is_Photograph.ToString();
                config.AppSettings.Settings["PT_Depostion"].Value = cfm.PT.ToString();
                config.AppSettings.Settings["PT_ELYFile"].Value = cfm.PTTemp;
                config.AppSettings.Settings["FIB_ELYFile"].Value = cfm.FIBTemp;
                config.AppSettings.Settings["Stretch_Magnification"].Value = cfm.Stretch_Magnification.ToString();
                config.AppSettings.Settings["Location_Magnification"].Value = cfm.Location_Magnification.ToString();
                config.AppSettings.Settings["Location_Voltage"].Value = cfm.Location_Voltage.ToString();
                config.AppSettings.Settings["Photograph_Magnification"].Value = cfm.Photograph_Magnification.ToString();
                config.AppSettings.Settings["Photograph_Voltage"].Value = cfm.Photograph_Voltage.ToString();
                config.AppSettings.Settings["Correction_Angle"].Value = cfm.Correction_Angle.ToString();
                config.AppSettings.Settings["SampleName"].Value = cfm.SampleName;
                config.AppSettings.Settings["Firms"].Value = cfm.Firm;
                config.AppSettings.Settings["FIB_Magnification"].Value = cfm.FIB_Magnification.ToString();
                config.AppSettings.Settings["Is_Title"].Value = cfm.Tilt.ToString();
                config.AppSettings.Settings["ZDistance"].Value = cfm.ZDistance.ToString();
                config.Save(ConfigurationSaveMode.Modified);
                ConfigurationManager.RefreshSection("appSettings");//重新加载新的配置文件
                return true;
            }
            catch (Exception ex)
            {
                LogManager.LogError(ex.Message);
                return false;
            }
        }

        /// <summary>
        /// 删除config文件节点中内容信息
        /// </summary>
        public bool DelConfigNodeContentInfo(string delControlName, string selName)
        {
            try
            {
                switch (delControlName)
                {
                    case "WYP":
                        //样品类型
                        List<String> _sT = sT.ToList();
                        _sT.Remove(selName);
                        string wsT = string.Join(",", _sT.ToArray());
                        config.AppSettings.Settings["Sample_Type"].Value = wsT;
                        break;
                    case "WCS":
                        //厂商
                        List<String> _firms = firms.ToList();
                        _firms.Remove(selName);
                        string wFirms = string.Join(",", _firms.ToArray());
                        config.AppSettings.Settings["Firm"].Value = wFirms;
                        break;
                    case "WPZD":
                        //拍照电压
                        List<String> _WPZD = WPZD.ToList();
                        _WPZD.Remove(selName);
                        string wWPZD = string.Join(",", _WPZD.ToArray());
                        config.AppSettings.Settings["WPZD"].Value = wWPZD;
                        break;
                    case "WPZF":
                        //拍照放大位数
                        List<String> _WPZF = WPZF.ToList();
                        _WPZF.Remove(selName);
                        string wWPZF = string.Join(",", _WPZF.ToArray());
                        config.AppSettings.Settings["WPZF"].Value = wWPZF;
                        break;
                    case "WQGD"://定位切割电压
                        List<String> _WQGD = WQGD.ToList();
                        _WQGD.Remove(selName);
                        string wWQGD = string.Join(",", _WQGD.ToArray());
                        config.AppSettings.Settings["WQGD"].Value = wWQGD;
                        break;
                    case "WQGF": //定位切割放大位数
                        List<String> _WQGF = WQGF.ToList();
                        _WQGF.Remove(selName);
                        string wWQGF = string.Join(",", _WQGF.ToArray());
                        config.AppSettings.Settings["WQGF"].Value = wWQGF;
                        break;
                    case "WLZ":
                        //拉直操作放大位数
                        List<String> _WLZ = WLZ.ToList();
                        _WLZ.Remove(selName);
                        string wWLZ = string.Join(",", _WLZ.ToArray());
                        config.AppSettings.Settings["WLZ"].Value = wWLZ;
                        break;
                    case "WFIB":
                        //FIB放大倍数
                        List<String> _WFIB = WFIB.ToList();
                        _WFIB.Remove(selName);
                        string wWFIB = string.Join(",", _WFIB.ToArray());
                        config.AppSettings.Settings["WFIB"].Value = wWFIB;
                        break;
                }
                config.Save(ConfigurationSaveMode.Modified);
                ConfigurationManager.RefreshSection("appSettings");//重新加载新的配置文件
                return true;
            }
            catch (Exception ex)
            {
                LogManager.LogError(ex.Message);
                return true;
            }
        }

        /// <summary>
        /// 绑定下拉菜单
        /// </summary>
        /// <param name="cb"></param>
        /// <param name="strGroup"></param>
        private void BindComboxData(ComboBox cb, string[] strGroup)
        {
            for (int i = 0; i < strGroup.Length; i++)
            {
                if (!strGroup[i].Equals(""))
                {
                    cb.Items.Add(strGroup[i]);
                }
            }
        }

        /// <summary>
        /// 读取Config文件信息
        /// </summary>
        public void ReloadConfig()
        {
            cbbWYP.Items.Clear();
            cbbWCS.Items.Clear();
            cbbWPZD.Items.Clear();
            cbbWPZF.Items.Clear();
            cbbWQGD.Items.Clear();
            cbbWQGF.Items.Clear();
            cbbWLZ.Items.Clear();
            //cbbWFIB.Items.Clear();
            txtYPSCur.Text = config.AppSettings.Settings["PixelSize_Y_Cur"].Value.ToString();
            m_TemplateFilePath = config.AppSettings.Settings["TemplateFilePath"].Value.ToString();
            string sample_Type = config.AppSettings.Settings["Sample_Type"].Value.ToString();
            string firm = config.AppSettings.Settings["Firm"].Value.ToString();
            string WPZDTemp = config.AppSettings.Settings["WPZD"].Value.ToString();
            string WPZFTemp = config.AppSettings.Settings["WPZF"].Value.ToString();
            string WQGDTemp = config.AppSettings.Settings["WQGD"].Value.ToString();
            string WQGFTemp = config.AppSettings.Settings["WQGF"].Value.ToString();
            string WLZTemp = config.AppSettings.Settings["WLZ"].Value.ToString();
            string WFIBTemp = config.AppSettings.Settings["WFIB"].Value.ToString();
            //string ZZDistance = config.AppSettings.Settings["ZDistance"].Value.ToString();
            string ScanRotCur = config.AppSettings.Settings["ScanRotCur"].Value.ToString();
            
            //样品类型
            sT = sample_Type.Split(',');
            BindComboxData(cbbWYP, sT);
            //厂商
            firms = firm.Split(',');
            BindComboxData(cbbWCS, firms);
            //拍照电压
            WPZD = WPZDTemp.Split(',');
            BindComboxData(cbbWPZD, WPZD);
            //拍照放大位数
            WPZF = WPZFTemp.Split(',');
            BindComboxData(cbbWPZF, WPZF);
            //定位切割电压
            WQGD = WQGDTemp.Split(',');
            BindComboxData(cbbWQGD, WQGD);
            //定位切割放大位数
            WQGF = WQGFTemp.Split(',');
            BindComboxData(cbbWQGF, WQGF);
            //拉直操作放大位数
            WLZ = WLZTemp.Split(',');
            BindComboxData(cbbWLZ, WLZ);
            //FIB放大倍数
            //WFIB = WFIBTemp.Split(',');
            //BindComboxData(cbbWFIB, WFIB);
            txtScanRotCur.Text = ScanRotCur;

            //FIB亮度对比度调节
            chkFIBAdjust.Checked = Convert.ToBoolean(config.AppSettings.Settings["Is_FIBDo"].Value);
            //FIB亮度对比度自动调节
            chkFIBAtuoAdjust.Checked = Convert.ToBoolean(config.AppSettings.Settings["Is_FIBAutoBc"].Value);
            tbBrightness.Text = config.AppSettings.Settings["FIBB"].Value;
            tbContrast.Text = config.AppSettings.Settings["FIBC"].Value;
            //放大倍数挡位切换
            chkGearSwitch.Checked = Convert.ToBoolean(config.AppSettings.Settings["MagComp"].Value);
            tbGear1to2.Text = config.AppSettings.Settings["MagRange1"].Value;
            tbGear2to3.Text = config.AppSettings.Settings["MagRange2"].Value;
            tbGear3to4.Text = config.AppSettings.Settings["MagRange3"].Value;
            tbGear1to2_Xdeviation.Text= config.AppSettings.Settings["MagCompX1"].Value;
            tbGear2to3_Xdeviation.Text= config.AppSettings.Settings["MagCompX2"].Value;
            tbGear3to4_Xdeviation.Text= config.AppSettings.Settings["MagCompX3"].Value;
            tbGear1to2_Ydeviation.Text= config.AppSettings.Settings["MagCompY1"].Value;
            tbGear2to3_Ydeviation.Text= config.AppSettings.Settings["MagCompY2"].Value;
            tbGear3to4_Ydeviation.Text= config.AppSettings.Settings["MagCompY3"].Value;

            //设置配置文件默认值
            chkWIsP.Checked=Convert.ToBoolean(config.AppSettings.Settings["Is_Photograph"].Value);
            chkWPT.Checked = Convert.ToBoolean(config.AppSettings.Settings["PT_Depostion"].Value);
            //倾斜观测
            chkWqxkc.Checked = Convert.ToBoolean(config.AppSettings.Settings["Is_Title"].Value);
            //移动Z轴大小
            txtYPSCur.Text = config.AppSettings.Settings["PixelSize_Y_Cur"].Value;
            //自动对焦模式
            //chkManul.Checked = Convert.ToBoolean(config.AppSettings.Settings["Focus_Mode"].Value);
            txtWPTF.Text = config.AppSettings.Settings["PT_ELYFile"].Value;
            txtWFIBF.Text = config.AppSettings.Settings["FIB_ELYFile"].Value;
            cbbWLZ.Text = config.AppSettings.Settings["Stretch_Magnification"].Value;
            cbbWQGF.Text = config.AppSettings.Settings["Location_Magnification"].Value;
            cbbWQGD.Text = config.AppSettings.Settings["Location_Voltage"].Value;
            cbbWPZF.Text = config.AppSettings.Settings["Photograph_Magnification"].Value;
            cbbWPZD.Text = config.AppSettings.Settings["Photograph_Voltage"].Value;
            //cbbWFIB.Text = config.AppSettings.Settings["FIB_Magnification"].Value;
            string Correction_Angle = config.AppSettings.Settings["Correction_Angle"].Value;
            //if (Convert.ToBoolean(config.AppSettings.Settings["Is_Title"].Value))
            //{
            //    cbbYDZZDX.Visible = true;
            //    label3.Visible = true;
            //}
            //else
            //{
            //    cbbYDZZDX.Visible = false;
            //    label3.Visible = false;
            //}
            if (Correction_Angle == "36")
            {
                cbbWXZ.SelectedIndex = 0;
            }
            else
            {
                cbbWXZ.SelectedIndex = 1;
            }
            cbbWYP.Text = config.AppSettings.Settings["SampleName"].Value;
            cbbWCS.Text = config.AppSettings.Settings["Firms"].Value;
            //能谱和能谱Z轴移动位置
            chkEDS.Checked = Convert.ToBoolean(config.AppSettings.Settings["Is_EDS"].Value);
            txtEDSZ.Text = Convert.ToString(config.AppSettings.Settings["EDS_Z"].Value);
            cbbEDSV.Text = Convert.ToString(config.AppSettings.Settings["EDS_V"].Value);
            cbbEDSA.Text = Convert.ToString(config.AppSettings.Settings["EDS_A"].Value);
        }

        /// <summary>
        /// 根据所选路径，读取模板文件
        /// </summary>
        public void ReadConfigInfo()
        {
            if (!ReadConfigPath.Equals(""))
            {
                ReloadConfig();
                ConfigFile cfm = new ConfigFile(FormHOZMainObject.m_MeasureFile.MParam);
                cfm.Read(ReadConfigPath);
                chkWIsP.Checked = cfm.m_Config.Is_Photograph;
                chkWPT.Checked = cfm.m_Config.PT;
                //自动对焦模式
                //cfm.FocusMode = chkManul.Checked;
                txtWPTF.Text = cfm.m_Config.PTTemp;
                txtWFIBF.Text = cfm.m_Config.FIBTemp;
                cbbWLZ.Text = cfm.m_Config.Stretch_Magnification.ToString();
                cbbWQGF.Text = cfm.m_Config.Location_Magnification.ToString();
                cbbWQGD.Text = cfm.m_Config.Location_Voltage.ToString();
                cbbWPZF.Text = cfm.m_Config.Photograph_Magnification.ToString();
                cbbWPZD.Text = cfm.m_Config.Photograph_Voltage.ToString();
                //cbbWFIB.Text = cfm.m_Config.FIB_Magnification.ToString();
                string Correction_Angle = cfm.m_Config.Correction_Angle.ToString();
                if (Correction_Angle == "36")
                {
                    cbbWXZ.SelectedIndex = 0;
                }
                else
                {
                    cbbWXZ.SelectedIndex = 1;
                }
                cbbWYP.Text = cfm.m_Config.SampleName;
                cbbWCS.Text = cfm.m_Config.Firm;
            }
        }

        /// <summary>
        /// 修改配置文件默认值
        /// </summary>
        /// <param name="sender"></param>
        /// <param name="e"></param>
        private void btnSaveDefalutPara_Click(object sender, EventArgs e)
        {
            if(chkWPT.Checked)
            {
                if (txtWPTF.Text=="")
                {
                    MessageBox.Show("PT文件路径不能为空");
                    return;
                }
            }
            if(txtWFIBF.Text=="")
            {
                MessageBox.Show("FIB文件路径不能为空");
                return;
            }
            if (EditConfig())
            {
                //MessageBox.Show("保存成功！", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
                formHOZMain.Saveclick();
            }

            //增加一个测量文件的参数修改
            SaveMeasureFile();
        }
        #endregion

        #region 删除下拉菜单选择项

        private void DelComboBoxItem_Click(object sender, EventArgs e)
        {
            if (MessageBox.Show("是否删除所选项信息？", "提示", MessageBoxButtons.YesNo, MessageBoxIcon.Information) == DialogResult.Yes)
            {
                PictureBox pbDel = (PictureBox)sender;
                string ctrlName = pbDel.Name.Substring(5, pbDel.Name.Length - 5);
                if (DelComboBoxItem(ctrlName))
                {
                    //重新加载
                    ReloadConfig(); 
                }
            }
        }

        /// <summary>
        /// 删除下拉菜单选择项
        /// </summary>
        public bool DelComboBoxItem(string controlName)
        {
            string delName = controlName;
            foreach (Control item in this.Controls)
            {
                if (item is ComboBox)
                {
                    if (item.Name.Contains(delName))
                    {
                        ComboBox cb = (ComboBox)item;
                        return DelConfigNodeContentInfo(delName, cb.Text);
                    }
                }
            }
            return false;
        }
        #endregion

        #region 根据是否仅拍照，进行逻辑判断
        private void chkWIsP_CheckedChanged(object sender, EventArgs e)
        {
            if (chkWIsP.Checked)
            {
                chkWqxkc.Checked = false;
                chkWqxkc.Visible = false;
                chkWPT.Checked = false;
                chkWPT.Visible = false;
                label61.Visible = false;
                label59.Visible = false;
                txtWFIBF.Visible = false;
                txtWPTF.Visible = false;
                btnPTTemplateFile.Visible = false;
                btnFIBTemplateFile.Visible = false;
                label58.Visible = false;
                cbbWXZ.Visible = false;
                chkEDS.Visible = false;
                label18.Visible = false;
                label19.Visible = false;
                txtEDSZ.Visible = false;
                //cbbWFIB.Visible = false;
                //pbDelWFIB.Visible = false;
                FormHOZMainObject.m_MeasureType = (int)MeasureMsgManage.measureType.Photo;
            }
            else
            {
                chkWqxkc.Visible = true;
                chkWPT.Visible = true;
                label61.Visible = true;
                label59.Visible = true;
                txtWFIBF.Visible = true;
                txtWPTF.Visible = true;
                btnPTTemplateFile.Visible = true;
                btnFIBTemplateFile.Visible = true;
                label58.Visible = true;
                cbbWXZ.Visible = true;
                chkEDS.Visible = true;
                //label2.Visible = true;
                //cbbWFIB.Visible = true;
                //pbDelWFIB.Visible = true;
                label18.Visible = true;
                label19.Visible = true;
                txtEDSZ.Visible = true;
                if (!chkWPT.Checked)
                {
                    FormHOZMainObject.m_MeasureType = (int)MeasureMsgManage.measureType.FIB;
                }
            }
            CreateCutHoleList();
        }
        #endregion

        #region 从配置文件中读取测量参数
        public MeasureParam GetMeasureParam()
        {
            MeasureParam cfm = new MeasureParam();

            //设置配置文件默认值
            bool bResult = false;

            bool.TryParse(config.AppSettings.Settings["Is_Photograph"].Value, out bResult);
            cfm.Is_Photograph = bResult;

            bool.TryParse(config.AppSettings.Settings["PT_Depostion"].Value, out bResult);
            cfm.PT = bResult;

            cfm.PTTemp = config.AppSettings.Settings["PT_ELYFile"].Value;
            cfm.FIBTemp = config.AppSettings.Settings["FIB_ELYFile"].Value;

            float fResult = (float)0.0;
            float.TryParse(config.AppSettings.Settings["Stretch_Magnification"].Value, out fResult);
            cfm.Stretch_Magnification = fResult;

            float.TryParse(config.AppSettings.Settings["Location_Magnification"].Value, out fResult);
            cfm.Location_Magnification = fResult;

            float.TryParse(config.AppSettings.Settings["Location_Voltage"].Value, out fResult);
            cfm.Location_Voltage = fResult;

            float.TryParse(config.AppSettings.Settings["Photograph_Magnification"].Value, out fResult);
            cfm.Photograph_Magnification = fResult;

            float.TryParse(config.AppSettings.Settings["Photograph_Voltage"].Value, out fResult);
            cfm.Photograph_Voltage = fResult;

            float.TryParse(config.AppSettings.Settings["Correction_Angle"].Value, out fResult);
            cfm.Correction_Angle = fResult;

            cfm.SampleName = config.AppSettings.Settings["SampleName"].Value;

            cfm.Firm = config.AppSettings.Settings["Firms"].Value;

            cfm.AutoFocus.UP = Convert.ToSingle(ConfigurationManager.AppSettings["Focus_UP"].ToString());
            cfm.AutoFocus.Down = Convert.ToSingle(ConfigurationManager.AppSettings["Focus_Down"].ToString());
            cfm.AutoFocus.Step = Convert.ToSingle(ConfigurationManager.AppSettings["Focus_Step"].ToString());
            cfm.AutoFocus.Range = Convert.ToSingle(ConfigurationManager.AppSettings["Focus_Range"].ToString());
            cfm.AutoFocus.fStep = Convert.ToSingle(ConfigurationManager.AppSettings["Focus_FStep"].ToString());

            cfm.FIBFocus.UP = Convert.ToSingle(ConfigurationManager.AppSettings["FIB_UP"].ToString());
            cfm.FIBFocus.Down = Convert.ToSingle(ConfigurationManager.AppSettings["FIB_Down"].ToString());
            cfm.FIBFocus.Step = Convert.ToSingle(ConfigurationManager.AppSettings["FIB_Step"].ToString());
            cfm.FIBFocus.Range = Convert.ToSingle(ConfigurationManager.AppSettings["FIB_Range"].ToString());
            cfm.FIBFocus.fStep = Convert.ToSingle(ConfigurationManager.AppSettings["FIB_FStep"].ToString());

            cfm.AutoStigX.UP = Convert.ToSingle(ConfigurationManager.AppSettings["StigX_UP"].ToString());
            cfm.AutoStigX.Down = Convert.ToSingle(ConfigurationManager.AppSettings["StigX_Down"].ToString());
            cfm.AutoStigX.Step = Convert.ToSingle(ConfigurationManager.AppSettings["StigX_Step"].ToString());
            cfm.AutoStigX.Range = Convert.ToSingle(ConfigurationManager.AppSettings["StigX_Range"].ToString());
            cfm.AutoStigX.fStep = Convert.ToSingle(ConfigurationManager.AppSettings["StigX_FStep"].ToString());

            cfm.AutoStigY.UP = Convert.ToSingle(ConfigurationManager.AppSettings["StigY_UP"].ToString());
            cfm.AutoStigY.Down = Convert.ToSingle(ConfigurationManager.AppSettings["StigY_Down"].ToString());
            cfm.AutoStigY.Step = Convert.ToSingle(ConfigurationManager.AppSettings["StigY_Step"].ToString());
            cfm.AutoStigY.Range = Convert.ToSingle(ConfigurationManager.AppSettings["StigY_Range"].ToString());
            cfm.AutoStigY.fStep = Convert.ToSingle(ConfigurationManager.AppSettings["StigY_FStep"].ToString());

            bool.TryParse(config.AppSettings.Settings["Is_Title"].Value, out bResult);
            cfm.Tilt = bResult;

            bool.TryParse(config.AppSettings.Settings["Is_EDS"].Value, out bResult);
            cfm.EDS = bResult;

            float.TryParse(config.AppSettings.Settings["ZDistance"].Value, out fResult);
            cfm.ZDistance = fResult;
            //add by sun 2020-12-15 增加不同样品扫描速度参数,每大类样品3种扫描速度
            //cfm.ScanSpeedNormal = ConfigurationManager.AppSettings["ScanSpeedNormal_"+cfm.SampleName].ToString();
            //cfm.ScanSpeedFocus = ConfigurationManager.AppSettings["ScanSpeedFocus_" + cfm.SampleName].ToString();
            //cfm.ScanSpeedHigh = ConfigurationManager.AppSettings["ScanSpeedHigh_" + cfm.SampleName].ToString();
            LogManager.AddHardwareLog("==========参数测试==" + cfm.SampleName+"======="+ config.AppSettings.Settings["ScanSpeedNormal_0"].Value, true);
            //add by sun 2020-12-15 增加不同样品扫描速度参数,每大类样品3种扫描速度 end
            return cfm;
        }
        #endregion

        #region 创建切孔列表
        private void CreateCutHoleList()
        {
            List<CutHole> ListCutHole = FormHOZMainObject.m_MeasureFile.ListCutHole;
            FormHOZMainObject.CreateCutHoleList(ListCutHole);
        } 
        #endregion

        #region 设置流程类型
        private void chkWPT_CheckedChanged(object sender, EventArgs e)
        {
            if (chkWPT.Checked)
            {
                FormHOZMainObject.m_MeasureType = (int)MeasureMsgManage.measureType.PT;
            }
            else
            {
                if (!chkWIsP.Checked)
                {
                    FormHOZMainObject.m_MeasureType = (int)MeasureMsgManage.measureType.FIB;
                }
            }
            CreateCutHoleList();
        } 
        #endregion

        #region 关闭按钮 鼠标操作事件
        private void pbClose_MouseEnter(object sender, EventArgs e)
        {
            pbClose.BackgroundImage = global::HOZProject.Properties.Resources.exit_2_;
        }

        private void pbClose_MouseLeave(object sender, EventArgs e)
        {
            pbClose.BackgroundImage = global::HOZProject.Properties.Resources.exit_2_;
        }
        #endregion

        #region 输入限制只能是数字
        private void textBox_KeyPress(string text, object sender, KeyPressEventArgs e)
        {
            //判断按键是不是要输入的类型。
            if (((int)e.KeyChar < 48 || (int)e.KeyChar > 57) && (int)e.KeyChar != 8 && (int)e.KeyChar != 46)
                e.Handled = true;
            //小数点的处理。
            if ((int)e.KeyChar == 46) //小数点
            {
                if (text.Length <= 0)
                    e.Handled = true; //小数点不能在第一位
                else
                {
                    float f;
                    float oldf;
                    bool b1 = false, b2 = false;
                    b1 = float.TryParse(text, out oldf);
                    b2 = float.TryParse(text + e.KeyChar.ToString(), out f);
                    if (b2 == false)
                    {
                        if (b1 == true)
                            e.Handled = true;
                        else
                            e.Handled = false;
                    }
                }
            }
        }

        private void ComboBox_KeyPress(string text, object sender, KeyPressEventArgs e)
        {

            //允许输入数字、小数点、删除键和负号  
            if ((e.KeyChar < 48 || e.KeyChar > 57) && e.KeyChar != 8 && e.KeyChar != (char)('.') && e.KeyChar != (char)('-'))
            {
                MessageBox.Show("请输入正确的数字");
                text = "";
                e.Handled = true;
            }
            if (e.KeyChar == (char)('-'))
            {
                if (text != "")
                {
                    MessageBox.Show("请输入正确的数字");
                    text = "";
                    e.Handled = true;
                }
            }
            //小数点只能输入一次  
            if (e.KeyChar == (char)('.') && ((ComboBox)sender).Text.IndexOf('.') != -1)
            {
                MessageBox.Show("请输入正确的数字");
                text = "";
                e.Handled = true;
            }
            //第一位不能为小数点  
            if (e.KeyChar == (char)('.') && ((ComboBox)sender).Text == "")
            {
                MessageBox.Show("请输入正确的数字");
                text = "";
                e.Handled = true;
            }
            //第一位是0，第二位必须为小数点  
            if (e.KeyChar != (char)('.') && ((ComboBox)sender).Text == "0")
            {
                MessageBox.Show("请输入正确的数字");
                text = "";
                e.Handled = true;
            }
            //第一位是负号，第二位不能为小数点  
            if (((ComboBox)sender).Text == "-" && e.KeyChar == (char)('.'))
            {
                MessageBox.Show("请输入正确的数字");
                text = "";
                e.Handled = true;
            }
        }

        private void cbbWPZD_KeyPress(object sender, KeyPressEventArgs e)
        {
            ComboBox_KeyPress(cbbWPZD.Text, sender, e);
        }

        private void cbbWPZF_KeyPress(object sender, KeyPressEventArgs e)
        {
            ComboBox_KeyPress(cbbWPZF.Text, sender, e);
        }

        private void cbbWQGD_KeyPress(object sender, KeyPressEventArgs e)
        {
            ComboBox_KeyPress(cbbWQGD.Text, sender, e);
        }

        private void cbbWQGF_KeyPress(object sender, KeyPressEventArgs e)
        {
            ComboBox_KeyPress(cbbWQGF.Text, sender, e);
        }

        private void cbbWLZ_KeyPress(object sender, KeyPressEventArgs e)
        {
            ComboBox_KeyPress(cbbWLZ.Text, sender, e);
        }

        #endregion

        #region Z轴的保护范围
        private void chkWqxkc_CheckedChanged(object sender, EventArgs e)
        {
            //if (chkWqxkc.Checked) 
            //{
            //    label3.Visible = true;
            //    cbbYDZZDX.Visible = true;
            //}
            //else
            //{
            //    label3.Visible = false;
            //    cbbYDZZDX.Visible = false;
            //}
        }

        private void txtYPSCur_TextChanged(object sender, EventArgs e)
        {
            if (txtYPSCur.Text!="")
            {
                if (Convert.ToSingle(txtYPSCur.Text)>5)
                {
                  MessageBox.Show("数值最大为5");
                  txtYPSCur.Text = "5";
                  }
            }
            else
            {
                txtYPSCur.Text = "1";
            }
            
        }

        private void txtYPSCur_KeyPress(object sender, KeyPressEventArgs e)
        {
            if (((int)e.KeyChar < 48 || (int)e.KeyChar > 57) && (int)e.KeyChar != 8 && (int)e.KeyChar != 46)
            {
                e.Handled = true;
            }
        }
        #endregion
        
        #region 参数确认
        private void SaveMeasureFile()
        {
            //界面上的参数
            FormHOZMainObject.m_MeasureFile.MParam = GetMeasureParamInfo();
            //配置文件中的参数
            FormHOZMainObject.m_MeasureFile.MParam.ZDistance = Convert.ToSingle(ConfigurationManager.AppSettings["ZDistance"].ToString());

            FormHOZMainObject.m_MeasureFile.MParam.AutoFocus.UP = Convert.ToSingle(ConfigurationManager.AppSettings["Focus_UP"].ToString());
            FormHOZMainObject.m_MeasureFile.MParam.AutoFocus.Down = Convert.ToSingle(ConfigurationManager.AppSettings["Focus_Down"].ToString());
            FormHOZMainObject.m_MeasureFile.MParam.AutoFocus.Step = Convert.ToSingle(ConfigurationManager.AppSettings["Focus_Step"].ToString());
            FormHOZMainObject.m_MeasureFile.MParam.AutoFocus.Range = Convert.ToSingle(ConfigurationManager.AppSettings["Focus_Range"].ToString());
            FormHOZMainObject.m_MeasureFile.MParam.AutoFocus.fStep = Convert.ToSingle(ConfigurationManager.AppSettings["Focus_FStep"].ToString());

            FormHOZMainObject.m_MeasureFile.MParam.FIBFocus.UP = Convert.ToSingle(ConfigurationManager.AppSettings["FIB_UP"].ToString());
            FormHOZMainObject.m_MeasureFile.MParam.FIBFocus.Down = Convert.ToSingle(ConfigurationManager.AppSettings["FIB_Down"].ToString());
            FormHOZMainObject.m_MeasureFile.MParam.FIBFocus.Step = Convert.ToSingle(ConfigurationManager.AppSettings["FIB_Step"].ToString());
            FormHOZMainObject.m_MeasureFile.MParam.FIBFocus.Range = Convert.ToSingle(ConfigurationManager.AppSettings["FIB_Range"].ToString());
            FormHOZMainObject.m_MeasureFile.MParam.FIBFocus.fStep = Convert.ToSingle(ConfigurationManager.AppSettings["FIB_FStep"].ToString());

            FormHOZMainObject.m_MeasureFile.MParam.AutoStigX.UP = Convert.ToSingle(ConfigurationManager.AppSettings["StigX_UP"].ToString());
            FormHOZMainObject.m_MeasureFile.MParam.AutoStigX.Down = Convert.ToSingle(ConfigurationManager.AppSettings["StigX_Down"].ToString());
            FormHOZMainObject.m_MeasureFile.MParam.AutoStigX.Step = Convert.ToSingle(ConfigurationManager.AppSettings["StigX_Step"].ToString());
            FormHOZMainObject.m_MeasureFile.MParam.AutoStigX.Range = Convert.ToSingle(ConfigurationManager.AppSettings["StigX_Range"].ToString());
            FormHOZMainObject.m_MeasureFile.MParam.AutoStigX.fStep = Convert.ToSingle(ConfigurationManager.AppSettings["StigX_FStep"].ToString());

            FormHOZMainObject.m_MeasureFile.MParam.AutoStigY.UP = Convert.ToSingle(ConfigurationManager.AppSettings["StigY_UP"].ToString());
            FormHOZMainObject.m_MeasureFile.MParam.AutoStigY.Down = Convert.ToSingle(ConfigurationManager.AppSettings["StigY_Down"].ToString());
            FormHOZMainObject.m_MeasureFile.MParam.AutoStigY.Step = Convert.ToSingle(ConfigurationManager.AppSettings["StigY_Step"].ToString());
            FormHOZMainObject.m_MeasureFile.MParam.AutoStigY.Range = Convert.ToSingle(ConfigurationManager.AppSettings["StigY_Range"].ToString());
            FormHOZMainObject.m_MeasureFile.MParam.AutoStigY.fStep = Convert.ToSingle(ConfigurationManager.AppSettings["StigY_FStep"].ToString());

            FormHOZMainObject.m_MeasureFile.IsModified = true;

            FormHOZMainObject.m_MeasureFile.MParam.ScanRotCor = Convert.ToSingle(ConfigurationManager.AppSettings["ScanRotCur"].ToString());
            FormHOZMainObject.m_MeasureFile.MParam.PixelSizeCor = Convert.ToSingle(ConfigurationManager.AppSettings["PixelSize_Y_Cur"].ToString());

            FormHOZMainObject.m_MeasureFile.MParam.EDS = Convert.ToBoolean(ConfigurationManager.AppSettings["Is_EDS"].ToString());
            FormHOZMainObject.m_MeasureFile.MParam.EDSZ = Convert.ToSingle(ConfigurationManager.AppSettings["EDS_Z"].ToString()) / 1000;
            FormHOZMainObject.m_MeasureFile.MParam.EDSV = Convert.ToSingle(ConfigurationManager.AppSettings["EDS_V"].ToString());
            FormHOZMainObject.m_MeasureFile.MParam.EDSA = Convert.ToSingle(ConfigurationManager.AppSettings["EDS_A"].ToString()) / 1000000000;

            if (Directory.Exists(FormHOZMainObject.m_MeasureFile.FilePath))//如果已经存在硬盘上要重新保存文件
            {
                FormHOZMainObject.m_MeasureFile.Save();
            }
        }
        private void button1_Click(object sender, EventArgs e)
        {
            //保存测量文件的参数
            SaveMeasureFile();
        }


        #endregion

        private void chkFIBAdjust_CheckedChanged(object sender, EventArgs e)
        {
            if (!chkFIBAdjust.Checked)
            {
                chkFIBAtuoAdjust.Checked = false;
                chkFIBAtuoAdjust.Visible = false;
            }
            else
            {
                chkFIBAtuoAdjust.Visible = true;
            }
            if (chkFIBAtuoAdjust.Checked)
            {
                label4.Visible = false;
                tbBrightness.Visible = false;
                label7.Visible = false;
                label5.Visible = false;
                tbContrast.Visible = false;
                label8.Visible = false;
            }
            else
            {
                label4.Visible = true;
                tbBrightness.Visible = true;
                label7.Visible = true;
                label5.Visible = true;
                tbContrast.Visible = true;
                label8.Visible = true;
            }
        }

        private void chkFIBAtuoAdjust_CheckedChanged(object sender, EventArgs e)
        {
            if (chkFIBAtuoAdjust.Checked)
            {
                label4.Visible = false;
                tbBrightness.Visible = false;
                label7.Visible = false;
                label5.Visible = false;
                tbContrast.Visible = false;
                label8.Visible = false;
            }
            else
            {
                label4.Visible = true;
                tbBrightness.Visible = true;
                label7.Visible = true;
                label5.Visible = true;
                tbContrast.Visible = true;
                label8.Visible = true;
            }
        }

        private void tbBrightness_KeyPress(object sender, KeyPressEventArgs e)
        {
            textBox_KeyPress(tbBrightness.Text, sender, e);
        }

        private void tbContrast_KeyPress(object sender, KeyPressEventArgs e)
        {
            textBox_KeyPress(tbContrast.Text, sender, e);
        }

        private void tbGear1to2_KeyPress(object sender, KeyPressEventArgs e)
        {
            textBox_KeyPress(tbGear1to2.Text, sender, e);
        }

        private void tbGear2to3_KeyPress(object sender, KeyPressEventArgs e)
        {
            textBox_KeyPress(tbGear2to3.Text, sender, e);
        }

        private void tbGear3to4_KeyPress(object sender, KeyPressEventArgs e)
        {
            textBox_KeyPress(tbGear3to4.Text, sender, e);
        }

        private void tbGear1to2_Xdeviation_KeyPress(object sender, KeyPressEventArgs e)
        {
            textBox_KeyPress(tbGear1to2.Text, sender, e);
        }

        private void tbGear2to3_Xdeviation_KeyPress(object sender, KeyPressEventArgs e)
        {
            textBox_KeyPress(tbGear2to3.Text, sender, e);
        }

        private void tbGear3to4_Xdeviation_KeyPress(object sender, KeyPressEventArgs e)
        {
            textBox_KeyPress(tbGear3to4.Text, sender, e);
        }

        private void tbGear1to2_Ydeviation_KeyPress(object sender, KeyPressEventArgs e)
        {
            textBox_KeyPress(tbGear1to2.Text, sender, e);
        }

        private void tbGear2to3_Ydeviation_KeyPress(object sender, KeyPressEventArgs e)
        {
            textBox_KeyPress(tbGear2to3.Text, sender, e);
        }

        private void tbGear3to4_Ydeviation_KeyPress(object sender, KeyPressEventArgs e)
        {
            textBox_KeyPress(tbGear3to4.Text, sender, e);
        }

        private void tbContrast_MaskInputRejected(object sender, MaskInputRejectedEventArgs e)
        {
            
        }

        private void tbContrast_KeyPress_1(object sender, KeyPressEventArgs e)
        {
            
        }

        private void tbContrast_TextChanged(object sender, EventArgs e)
        {
            if(Convert.ToInt32(tbContrast.Text)>100|| Convert.ToInt32(tbContrast.Text)<0)
            {
                tbContrast.Text="0";
            }
        }

        private void tbBrightness_TextChanged(object sender, EventArgs e)
        {
            if (Convert.ToInt32(tbBrightness.Text) > 100 || Convert.ToInt32(tbBrightness.Text) < 0)
            {
                tbBrightness.Text = "0";
            }
        }

        private void btnHandSavePoints_Click(object sender, EventArgs e)
        {
            UserControls.FormExportPoints uCExport = new UserControls.FormExportPoints();
            uCExport.ShowDialog();
            List<CutHole> ListCutHole = uCExport.ListCutHole;
            //文件路径
            //string CutHoleFilePath = FormHOZMainObject.m_MeasureFile.CutHoleFilePath;
            FormHOZMainObject.CreateCutHoleList(ListCutHole);
            FormHOZMainObject.m_MeasureFile.ListCutHole = ListCutHole;
            //显示导入的切孔数量
            lblCutHoleCount.Text = string.Format("成功导入{0}个切孔", ListCutHole.Count);
            //tbCutHoleFilePath.Text = CutHoleFilePath;
            //保存测量文件
            if (Directory.Exists(FormHOZMainObject.m_MeasureFile.FilePath))
            {
                FormHOZMainObject.m_MeasureFile.Save();
            }
        }
        
        private void cbbWYP_SelectedIndexChanged(object sender, EventArgs e)
        {
            SetTypel();
        }
        private void SetTypel()
        {
            if (cbbWYP.Text == "0")
            {
                cbbWCS.Text = FormHOZMainObject.m_MeasureFile.MParam.VendorType0;//厂商
                cbbWLZ.Text = FormHOZMainObject.m_MeasureFile.MParam.StraightenTimesType0;//拉直放大倍数
                cbbWQGD.Text = FormHOZMainObject.m_MeasureFile.MParam.PositioningVoltageeType0;//定位电压
                cbbWQGF.Text = FormHOZMainObject.m_MeasureFile.MParam.PositioningTimesType0;//定位放大倍数
                cbbWPZD.Text = FormHOZMainObject.m_MeasureFile.MParam.PhotoVoltageeType0;//拍照电压
                cbbWPZF.Text = FormHOZMainObject.m_MeasureFile.MParam.PhotoTimesType0;//拍照放大倍数
                cbbEDSV.Text = FormHOZMainObject.m_MeasureFile.MParam.SEMVoltageeType0;//能谱电压值
                cbbEDSA.Text = FormHOZMainObject.m_MeasureFile.MParam.SEMCurrentType0;//能谱电流值
            }
            else
                        if (cbbWYP.Text == "1")
            {
                cbbWCS.Text = FormHOZMainObject.m_MeasureFile.MParam.VendorType1;//厂商
                cbbWLZ.Text = FormHOZMainObject.m_MeasureFile.MParam.StraightenTimesType1;//拉直放大倍数
                cbbWQGD.Text = FormHOZMainObject.m_MeasureFile.MParam.PositioningVoltageeType1;//定位电压
                cbbWQGF.Text = FormHOZMainObject.m_MeasureFile.MParam.PositioningTimesType1;//定位放大倍数
                cbbWPZD.Text = FormHOZMainObject.m_MeasureFile.MParam.PhotoVoltageeType1;//拍照电压
                cbbWPZF.Text = FormHOZMainObject.m_MeasureFile.MParam.PhotoTimesType1;//拍照放大倍数
                cbbEDSV.Text = FormHOZMainObject.m_MeasureFile.MParam.SEMVoltageeType1;//能谱电压值
                cbbEDSA.Text = FormHOZMainObject.m_MeasureFile.MParam.SEMCurrentType1;//能谱电流值
            }
            else
                        if (cbbWYP.Text == "2")
            {
                cbbWCS.Text = FormHOZMainObject.m_MeasureFile.MParam.VendorType2;//厂商
                cbbWLZ.Text = FormHOZMainObject.m_MeasureFile.MParam.StraightenTimesType2;//拉直放大倍数
                cbbWQGD.Text = FormHOZMainObject.m_MeasureFile.MParam.PositioningVoltageeType2;//定位电压
                cbbWQGF.Text = FormHOZMainObject.m_MeasureFile.MParam.PositioningTimesType2;//定位放大倍数
                cbbWPZD.Text = FormHOZMainObject.m_MeasureFile.MParam.PhotoVoltageeType2;//拍照电压
                cbbWPZF.Text = FormHOZMainObject.m_MeasureFile.MParam.PhotoTimesType2;//拍照放大倍数
                cbbEDSV.Text = FormHOZMainObject.m_MeasureFile.MParam.SEMVoltageeType2;//能谱电压值
                cbbEDSA.Text = FormHOZMainObject.m_MeasureFile.MParam.SEMCurrentType2;//能谱电流值
            }
            else
                        if (cbbWYP.Text == "3")
            {
                cbbWCS.Text = FormHOZMainObject.m_MeasureFile.MParam.VendorType3;//厂商
                cbbWLZ.Text = FormHOZMainObject.m_MeasureFile.MParam.StraightenTimesType3;//拉直放大倍数
                cbbWQGD.Text = FormHOZMainObject.m_MeasureFile.MParam.PositioningVoltageeType3;//定位电压
                cbbWQGF.Text = FormHOZMainObject.m_MeasureFile.MParam.PositioningTimesType3;//定位放大倍数
                cbbWPZD.Text = FormHOZMainObject.m_MeasureFile.MParam.PhotoVoltageeType3;//拍照电压
                cbbWPZF.Text = FormHOZMainObject.m_MeasureFile.MParam.PhotoTimesType3;//拍照放大倍数
                cbbEDSV.Text = FormHOZMainObject.m_MeasureFile.MParam.SEMVoltageeType3;//能谱电压值
                cbbEDSA.Text = FormHOZMainObject.m_MeasureFile.MParam.SEMCurrentType3;//能谱电流值
            }
        }

    }
}