HOZ/HOZProject/App.config

<?xml version="1.0" encoding="utf-8"?>
<configuration>
    <startup> 
        <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.6.2" />
    </startup>
    <appSettings>
      <!--厂商_数据源-->
      <add key="Firms" value="Noah-BOE,LG,SDC,Ocean-BOE" />

      
      <!--PT使用的ELY文件-->
      <add key="PT_ELYFile" value="" />
      <!--FIB使用的ELY文件-->
      <add key="FIB_ELYFile" value="" />

   
      <!--样品类型-->
      <add key="LastSampleType" value="1" />
      <!--厂商-->
      <add key="LastSelectFirm" value="Ocean-BOE" />
      <!--是否倾斜样品台-->
      <add key="Is_Title" value="True" />
   
      <!--是否PT沉积-->
      <add key="PT_Depostion" value="False" />
      <!--是否能谱测量-->
      <add key="Is_EDS" value="True" />
      <!--能谱移动Z轴位置-->
      <add key="EDS_Z" value="37.241" />
      <!--能谱电压设置值-->
      <add key="EDS_V" value="7000" />
      <!--能谱电流设置值-->
      <add key="EDS_A" value="0.5" />
      <!--能谱Xray Mode 0:point mode 1: line mode 2: area mode-->
      <add key="EDS_XrayMode" value="1" />
    
  
      <!--ScanRotate角度补偿参数-->
      <add key="ScanRotCur" value="1" />
      <!--Title角度补偿后Y轴方向PixelSize修正值-->
      <add key="PixelSize_Y_Cur" value="1.236" />
      
      
      
      <!--图像接口模式,人工干预-1，自动运算-2-->
      <add key="Hand_Intervene" value="2" />

      <!--远程对焦IP地址-->
      <add key="FocusServerIP" value="192.168.1.101" />
      <!--远程对焦端口号-->
      <add key="FocusServerPort" value="8123" />
      <!--远程IP地址-->
      <add key="WebServerIP" value="127.0.0.1" />
      <!--远程IP端口-->
      <add key="WebServerPort" value="8009" />
      <!--远程算法地址-->
      <add key="WebServerUrl" value="FIB_degree_recognize,FIB_cal_cut_location,FIB_verify,FIB_cut_center_location,FIB_sharpness,FIB_sharpness,FIB_degree_recognize_trap,FIB_measure_location,FIB_measure_parameter,FIB_EDS_points,FIB_EDS_lines,FIB_EDS_areas" />



      <add key="RemoteCutHoleInfoFilePath" value="\\192.168.1.101\Service" />

      <add key="RemoteHintELYPath" value="\\192.168.1.101\fib auto\FIB Recipe\" />
      <add key="RemoteHintMLFPath" value="\\192.168.1.101\fib auto\FIB Recipe\" />

	  <!--在电镜电脑上需要有一下两个路径，并且共享权限为读写-->
		<add key="RemoteELYDesPath" value="\\192.168.1.101\Carl Zeiss\SmartFIB\API\Drop\"/>
		<add key="RemoteMLFDesPath" value="\\192.168.1.101\Carl Zeiss\SmartSEM\User\Service\"/>
	  <!--在电镜电脑上需要有一下两个路径，并且共享权限为读写end-->

      <!--是否仅拍照-->
      <!--<add key="Is_Photograph" value="False" />-->
      <!--add by sun 2020-12-17 增加调试时是否切割开关-->
      <!--<add key="IsCutingForDebug" value="true" />-->
      <!--add by sun 2020-12-17 增加调试时是否切割开关-->

      <!--add by zjx 2020-12-18 为了测试只做能谱部分-->
      <!--<add key="IsonlyEDSForDebug" value="true" />-->
      <!--add by zjx 2020-12-18 为了测试只做能谱部分-->
      
      


     
    </appSettings>
  <runtime>
    <assemblyBinding xmlns=" urn:schemas-microsoft-com:asm.v1">
      <dependentAssembly>
        <assemblyIdentity name="Newtonsoft.Json" culture="neutral" publicKeyToken="30ad4fe6b2a6aeed" />
        <bindingRedirect oldVersion="0.0.0.0-12.0.0.0" newVersion="10.0.0.0" />
      </dependentAssembly>
    </assemblyBinding>
    <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
      <dependentAssembly>
        <assemblyIdentity name="Newtonsoft.Json" publicKeyToken="30ad4fe6b2a6aeed" culture="neutral" />
        <bindingRedirect oldVersion="0.0.0.0-10.0.0.0" newVersion="10.0.0.0" />
      </dependentAssembly>
    </assemblyBinding>
  </runtime>
</configuration>