using PaintDotNet.Base.SettingModel;
using System;
using System.Drawing;
using System.Drawing.Drawing2D;
using System.Windows.Forms;
using PaintDotNet.Annotation.Enum;
using System.Collections.Generic;
using PaintDotNet.Base.CommTool;
using System.Linq;

namespace PaintDotNet.Annotation.Measure
{
    /// <summary>
    /// 测量->多边形测量->任意正方形
    /// </summary>
    public class MeasureRandSquare : MeasureDrawObject
    {
        /// <summary>
        /// 标注样式信息model
        /// </summary>
        public MeasureStyleModel.MeasureRandSquare measureRandSquare;
        /// <summary>
        /// 坐标点集合
        /// </summary>
        public List<PointF> pointArray;
        /// <summary>
        /// 第三个点
        /// </summary>
        PointF linePoint;
        /// <summary>
        /// 第四个点
        /// </summary>
        PointF linePoint1;
        /// <summary>
        /// 中心点
        /// </summary>
        PointF centerPoint;
        /// <summary>
        /// 旋转时的最后一个点记录，用于计算角度
        /// </summary>
        PointF lastPoint;
        /// <summary>
        /// 旋转时的标记
        /// </summary>
        public bool isPress = false;
        /// <summary>
        /// 重新计算过的外接矩形
        /// </summary>
        RectangleF largerRect;
        /// <summary>
        /// 周长
        /// </summary>
        //private double length = 0.0;
        /// <summary>
        /// 面积
        /// </summary>
        private double area = 0.0;
        /// <summary>
        /// 测量信息矩形定义
        /// </summary>
        private RectangleF rectangleF1 = new RectangleF();
        private RectangleF rectangleF2 = new RectangleF();
        private RectangleF rectangleF3 = new RectangleF();
        private RectangleF rectangleF4 = new RectangleF();
        private RectangleF rectangleF5 = new RectangleF();
        private RectangleF rectangleF6 = new RectangleF();
        private RectangleF rectangleF7 = new RectangleF();
        private RectangleF rectangleF8 = new RectangleF();
        private RectangleF rectangleF9 = new RectangleF();
        private RectangleF rectangleF10 = new RectangleF();
        private RectangleF rectangleF11 = new RectangleF();
        /// <summary>
        /// 文本上用于拖动的点
        /// </summary>
        private Point pointL = new Point();
        /// <summary>
        /// 绘制限制(第一次绘制时)
        /// </summary>
        public bool pointChange = true;
        /// <summary>
        /// 区分移动文本
        /// </summary>
        private int moveKb;
        /// <summary>
        /// 绘制限制(从配置文件加载)
        /// </summary>
        public bool configurationFile = false;
        /// <summary>
        /// 绘制限制(更改属性时)
        /// </summary>
        private bool SavePointChange;
        /// <summary>
        /// 绘制属性
        /// </summary>
        private string[] drawingPropertiesList;
        /// <summary>
        /// 绘制属性(克隆)
        /// </summary>
        private string[] drawingPropertiesListClone;
        private bool drawing;
        /// <summary>
        /// 旋转角度
        /// </summary>
        private double angle;
        /// <summary>
        /// 绘制点
        /// </summary>
        private PointF PointF = new PointF();
        /// <summary>
        /// 是否移动了鼠标
        /// </summary>
        public bool moved = false;
        /// <summary>
        /// 限制绘制(绘制中)
        /// </summary>
        public bool mouseUpPointChange = false;
        public MeasureRandSquare(ISurfaceBox surfaceBox, int x1, int y1, int x2, int y2, bool clone) : base()
        {
            this.objectType = DrawClass.Measure;
            this.drawToolType = DrawToolType.MeasureRandSquare;
            this.pointArray = new List<PointF>();
            this.measureRandSquare = surfaceBox.GetMeasureStyleModel().measureRandSquare;
            this.startPoint.X = x1;
            this.startPoint.Y = y1;
            this.endPoint.X = x2;
            this.endPoint.Y = y2;
            if (clone)
            {
                drawing = true;
                this.pointArray.Add(this.startPoint);
                this.pointArray.Add(this.endPoint);
            }
            this.measurementUnit = (MeasurementUnit)System.Enum.Parse(typeof(MeasurementUnit), surfaceBox.GetPxPerUnit()[0]);
            this.unitString = surfaceBox.GetPxPerUnit()[1];
            this.unit = surfaceBox.GetPxPerUnit()[2];
            
        }
        /// <summary>
        /// 测量属性
        /// </summary>
        /// <returns></returns>
        public override Dictionary<System.Enum, object> GetData()
        {
            if (data.ContainsKey(MeasureAttributes.MeasureMethod))
                data[MeasureAttributes.MeasureMethod] = PdnResources.GetString("Menu.MeasureAction.PolygonMeasurement.Text");
            else
                data.Add(MeasureAttributes.MeasureMethod, PdnResources.GetString("Menu.MeasureAction.PolygonMeasurement.Text"));

            if (data.ContainsKey(MeasureAttributes.MeasureUnitCN))
                data[MeasureAttributes.MeasureUnitCN] = this.unitString;
            else
                data.Add(MeasureAttributes.MeasureUnitCN, this.unitString);

            if (data.ContainsKey(MeasureAttributes.MeasureUnitEN))
                data[MeasureAttributes.MeasureUnitEN] = this.unit;
            else
                data.Add(MeasureAttributes.MeasureUnitEN, this.unit);

            if (data.ContainsKey(MeasureAttributes.PixelStartX))
                data[MeasureAttributes.PixelStartX] = startPoint.X;
            else
                data.Add(MeasureAttributes.PixelStartX, startPoint.X);

            if (data.ContainsKey(MeasureAttributes.PixelStartY))
                data[MeasureAttributes.PixelStartY] = startPoint.Y;
            else
                data.Add(MeasureAttributes.PixelStartY, startPoint.Y);

            if (data.ContainsKey(MeasureAttributes.PhysicalStartX))
                data[MeasureAttributes.PhysicalStartX] = Math.Round(startPoint.X * unitLength, decimalPlaces);
            else
                data.Add(MeasureAttributes.PhysicalStartX, Math.Round(startPoint.X * unitLength, decimalPlaces));

            if (data.ContainsKey(MeasureAttributes.PhysicalStartY))
                data[MeasureAttributes.PhysicalStartY] = Math.Round(startPoint.Y * unitLength, decimalPlaces);
            else
                data.Add(MeasureAttributes.PhysicalStartY, Math.Round(startPoint.Y * unitLength, decimalPlaces));

            if (data.ContainsKey(MeasureAttributes.PixelArea))
                data[MeasureAttributes.PixelArea] = Math.Round(area, decimalPlaces);
            else
                data.Add(MeasureAttributes.PixelArea, Math.Round(area, decimalPlaces));

            string s = Math.Round(this.area * unitLength, decimalPlaces).ToString();
            if (s.IndexOf(".") == -1)
            {
                for (int i = 0; i < decimalPlaces; i++)
                {
                    if (i == 0)
                        s += ".";
                    s += "0";
                }
            }
            else
            {
                int a = s.Length - s.IndexOf(".") - 1;
                if (a < decimalPlaces)
                {
                    for (int i = 0; i < decimalPlaces - a; i++)
                    {
                        s += "0";
                    }
                }
            }
            if (data.ContainsKey(MeasureAttributes.PhysicalArea))
                data[MeasureAttributes.PhysicalArea] = s;
            else
                data.Add(MeasureAttributes.PhysicalArea, s);

            if (data.ContainsKey(MeasureAttributes.PixelCircumference))
                data[MeasureAttributes.PixelCircumference] = Math.Round(length, decimalPlaces);
            else
                data.Add(MeasureAttributes.PixelCircumference, Math.Round(length, decimalPlaces));

             s = Math.Round(this.length * unitLength, decimalPlaces).ToString();
            if (s.IndexOf(".") == -1)
            {
                for (int i = 0; i < decimalPlaces; i++)
                {
                    if (i == 0)
                        s += ".";
                    s += "0";
                }
            }
            else
            {
                int a = s.Length - s.IndexOf(".") - 1;
                if (a < decimalPlaces)
                {
                    for (int i = 0; i < decimalPlaces - a; i++)
                    {
                        s += "0";
                    }
                }
            }
            if (data.ContainsKey(MeasureAttributes.PhysicalCircumference))
                data[MeasureAttributes.PhysicalCircumference] = s;
            else
                data.Add(MeasureAttributes.PhysicalCircumference, s);

            return data;
        }

        public MeasureRandSquare(ISurfaceBox surfaceBox, List<PointF> points, ParentStyleModel parentStyleModel, Object content) : base()
        {
            this.objectType = DrawClass.Measure;
            this.drawToolType = DrawToolType.MeasureRandSquare;
            this.ISurfaceBox = surfaceBox;

            measureRandSquare = (MeasureStyleModel.MeasureRandSquare)parentStyleModel;
            pointArray = DrawRulerHelper.DeepCopyListByReflect(points);
            startPoint.X = points[0].X;
            startPoint.Y = points[0].Y;
            endPoint.X = points[1].X;
            endPoint.Y = points[1].Y;
            linePoint.X = points[2].X;
            linePoint.Y = points[2].Y;
            linePoint1.X = points[3].X;
            linePoint1.Y = points[3].Y;

            CalcOtherRectangle();
            CalcCenter();
            largerRect = GetBoundingBox();
            this.measurementUnit = (MeasurementUnit)System.Enum.Parse(typeof(MeasurementUnit), surfaceBox.GetPxPerUnit()[0]);
            this.unitString = surfaceBox.GetPxPerUnit()[1];
            this.unit = surfaceBox.GetPxPerUnit()[2];
            
            this.configurationFile = true;
            this.moved = true;
        }

        /// <summary>
        /// Clone this instance
        /// </summary>
        public override DrawObject Clone()
        {
            MeasureRandSquare measureRandSquare = new MeasureRandSquare(ISurfaceBox, 0, 0, 0, 1, false);
            measureRandSquare.objectType = DrawClass.Measure;
            measureRandSquare.drawToolType = DrawToolType.MeasureRandSquare;
            measureRandSquare.ISurfaceBox = this.ISurfaceBox;
            foreach (PointF p in this.pointArray)
            {
                measureRandSquare.pointArray.Add(p);
            }
            measureRandSquare.startPoint = this.startPoint;
            measureRandSquare.endPoint = this.endPoint;
            measureRandSquare.linePoint = this.linePoint;
            measureRandSquare.linePoint1 = this.linePoint1;
            if (drawingPropertiesList != null)
                measureRandSquare.drawingPropertiesListClone = drawingPropertiesList;
            measureRandSquare.moved = true;
            FillDrawObjectFields(measureRandSquare);
            return measureRandSquare;
        }

        public override DrawObject Clone(ISurfaceBox surfaceBox)
        {
            MeasureRandSquare measureRandSquare = new MeasureRandSquare(surfaceBox, this.GetPoints(), this.measureRandSquare, null);
            if (drawingPropertiesList != null)
                measureRandSquare.drawingPropertiesListClone = drawingPropertiesList;
            measureRandSquare.moved = true;
            FillDrawObjectFields(measureRandSquare);
            return measureRandSquare;
        }

        public override void Draw(Graphics g)
        {
            if(this.moved)
            {
                this.measureRandSquare = this.ISurfaceBox.GetMeasureStyleModel().measureRandSquare;
                drawingProperties.TryGetValue(this.drawToolType, out drawingPropertiesList);
                if (drawingPropertiesList == null)
                {
                    drawingPropertiesList = drawingPropertiesListClone;
                    if (!this.drawing)
                        this.configurationFile = true;
                }
                pointChangeObject.TryGetValue(this.drawToolType, out SavePointChange);
                g.SmoothingMode = SmoothingMode.AntiAlias;
                Font textfont = new Font(this.measureRandSquare.font, this.measureRandSquare.fontSize);
                Brush textbrush = new SolidBrush(Color.FromArgb(this.measureRandSquare.textColor));
                Color color = Color.FromArgb(this.measureRandSquare.lineColor);
                Pen pen = new Pen(color, this.measureRandSquare.lineWidth);
                //Pen pen = new Pen(color, 1);
                pen.DashStyle = (DashStyle)this.measureRandSquare.lineStyle;

                if (this.Selected)
                {
                    if (measureRandSquare.chooseStyle != null)
                    {
                        textfont = new Font(measureRandSquare.chooseStyle.font, measureRandSquare.chooseStyle.fontSize);
                        textbrush = new SolidBrush(Color.FromArgb(measureRandSquare.chooseStyle.textColor));
                        pen = new Pen(Color.FromArgb(measureRandSquare.chooseStyle.lineColor), measureRandSquare.chooseStyle.lineWidth);
                        pen.DashStyle = (DashStyle)measureRandSquare.chooseStyle.lineStyle;
                    }
                }

                if (!this.Selected)
                {
                    this.pointChange = true;
                    rectangleF1 = new RectangleF();
                    rectangleF2 = new RectangleF();
                    rectangleF3 = new RectangleF();
                    rectangleF4 = new RectangleF();
                    rectangleF5 = new RectangleF();
                    rectangleF6 = new RectangleF();
                    rectangleF7 = new RectangleF();
                    rectangleF8 = new RectangleF();
                    rectangleF9 = new RectangleF();
                    rectangleF10 = new RectangleF();
                    rectangleF11 = new RectangleF();
                }

                Matrix mtxSave = g.Transform;
                Matrix matrix = g.Transform;

                string frontStr = string.Empty;

                if (this.measureRandSquare.showSuffix)
                {
                    frontStr = this.measureRandSquare.suffixName;
                }

                if (this.measureRandSquare.showSerial)
                {

                    #region [获取序号]

                    List<DrawObject> newGraphicsList = new List<DrawObject>();

                    int n = ISurfaceBox.GraphicsList.Count;

                    int num = 0;

                    for (int i = n - 1; i >= 0; i--)
                    {
                        newGraphicsList.Add(ISurfaceBox.GraphicsList[i].Clone());
                    }

                    var newGraphics = newGraphicsList.Where(m => m.ID.Equals(this.ID)).FirstOrDefault();

                    if (newGraphics != null)
                    {
                        num = newGraphicsList.IndexOf(newGraphics) + 1;
                    }

                    #endregion

                    frontStr = $"[{ num }]{frontStr}";
                }

                if (this.measureRandSquare.showAlias)
                {

                    frontStr = this.measureRandSquare.aliasName + frontStr;
                }

                if (pointArray.Count > 3)
                {
                    SizeF sizeF = new SizeF();
                    g.DrawLine(pen, pointArray[0].X, pointArray[0].Y, pointArray[2].X, pointArray[2].Y);
                    g.DrawLine(pen, pointArray[2].X, pointArray[2].Y, pointArray[1].X, pointArray[1].Y);
                    g.DrawLine(pen, pointArray[1].X, pointArray[1].Y, pointArray[3].X, pointArray[3].Y);
                    g.DrawLine(pen, pointArray[3].X, pointArray[3].Y, pointArray[0].X, pointArray[0].Y);

                    // 计算矩形长和宽
                    double h = BasicCalculationHelper.GetDistance(pointArray[0], pointArray[2], 10);
                    double w = BasicCalculationHelper.GetDistance(pointArray[0], pointArray[3], 10);
                    length = (h + w) * 2;
                    area = h * w;

                    // 是否绘制
                    if (this.pointChange || this.SavePointChange || this.mouseUpPointChange || this.mouseUpAttribute)
                    {
                        // 属性文本的间隔定义
                        int offsetValue = measureRandSquare.fontSize + measureRandSquare.fontSize / 2;
                        int offsetValue1 = measureRandSquare.lineWidth * 2 / 3;
                        int offset = offsetValue1;
                        this.pointL = new Point((int)pointArray[0].X, (int)pointArray[0].Y);
                        if (drawingPropertiesList != null)
                        {
                            // 像素周长
                            if (drawingPropertiesList.Contains(MeasureAttributes.PixelCircumference.ToString()))
                            {
                                sizeF = g.MeasureString(frontStr + "" + Math.Round(this.length, decimalPlaces) + "px", textfont);
                                rectangleF10.Location = new Point((int)this.PointF.X + offsetValue1 - (int)sizeF.Width / 2, (int)this.PointF.Y + offset);
                                offset += offsetValue;
                            }
                            // 物理周长
                            if (drawingPropertiesList.Contains(MeasureAttributes.PhysicalCircumference.ToString()))
                            {
                                string s = Math.Round(this.length * unitLength, decimalPlaces).ToString();
                                if (s.IndexOf(".") == -1)
                                {
                                    for (int i = 0; i < decimalPlaces; i++)
                                    {
                                        if (i == 0)
                                            s += ".";
                                        s += "0";
                                    }
                                }
                                else
                                {
                                    int a = s.Length - s.IndexOf(".") - 1;
                                    if (a < decimalPlaces)
                                    {
                                        for (int i = 0; i < decimalPlaces - a; i++)
                                        {
                                            s += "0";
                                        }
                                    }
                                }
                                sizeF = g.MeasureString(frontStr + s + this.unit, textfont);
                                rectangleF11.Location = new Point((int)this.PointF.X + offsetValue1 - (int)sizeF.Width / 2, (int)this.PointF.Y + offset);
                                offset += offsetValue;
                            }
                            // 像素面积
                            if (drawingPropertiesList.Contains(MeasureAttributes.PixelArea.ToString()))
                            {
                                sizeF = g.MeasureString(frontStr + "" + Math.Round(this.area, decimalPlaces) + "px²", textfont);
                                rectangleF8.Location = new Point((int)this.PointF.X + offsetValue1 - (int)sizeF.Width / 2, (int)this.PointF.Y + offset);
                                offset += offsetValue;
                            }
                            // 物理面积
                            if (drawingPropertiesList.Contains(MeasureAttributes.PhysicalArea.ToString()))
                            {
                                string s = Math.Round(this.area * unitLength, decimalPlaces).ToString();
                                if (s.IndexOf(".") == -1)
                                {
                                    for (int i = 0; i < decimalPlaces; i++)
                                    {
                                        if (i == 0)
                                            s += ".";
                                        s += "0";
                                    }
                                }
                                else
                                {
                                    int a = s.Length - s.IndexOf(".") - 1;
                                    if (a < decimalPlaces)
                                    {
                                        for (int i = 0; i < decimalPlaces - a; i++)
                                        {
                                            s += "0";
                                        }
                                    }
                                }

                                sizeF = g.MeasureString(frontStr + s + this.unit + "²", textfont);
                                rectangleF9.Location = new Point((int)this.PointF.X + offsetValue1 - (int)sizeF.Width / 2, (int)this.PointF.Y + offset);
                                offset += offsetValue;
                            }
                            // 测量方式
                            if (drawingPropertiesList.Contains(MeasureAttributes.MeasureMethod.ToString()))
                            {
                                sizeF = g.MeasureString(frontStr + "" + PdnResources.GetString("Menu.MeasureAction.PolygonMeasurement.Text"), textfont);
                                rectangleF1.Location = new Point((int)this.PointF.X + offsetValue1 - (int)sizeF.Width / 2, (int)this.PointF.Y + offset);
                                offset += offsetValue;
                            }
                            // 测量单位(中文)
                            if (drawingPropertiesList.Contains(MeasureAttributes.MeasureUnitCN.ToString()))
                            {
                                sizeF = g.MeasureString(frontStr + "" + this.unitString, textfont);
                                rectangleF2.Location = new Point((int)this.PointF.X + offsetValue1 - (int)sizeF.Width / 2, (int)this.PointF.Y + offset);
                                offset += offsetValue;
                            }
                            // 测量单位(英文)
                            if (drawingPropertiesList.Contains(MeasureAttributes.MeasureUnitEN.ToString()))
                            {
                                sizeF = g.MeasureString(frontStr + "" + this.unit, textfont);
                                rectangleF3.Location = new Point((int)this.PointF.X + offsetValue1 - (int)sizeF.Width / 2, (int)this.PointF.Y + offset);
                                offset += offsetValue;
                            }
                            // 像素起始点X
                            if (drawingPropertiesList.Contains(MeasureAttributes.PixelStartX.ToString()))
                            {
                                sizeF = g.MeasureString(frontStr + "" + startPoint.X, textfont);
                                rectangleF4.Location = new Point((int)this.PointF.X + offsetValue1 - (int)sizeF.Width / 2, (int)this.PointF.Y + offset);
                                offset += offsetValue;
                            }
                            // 像素起始点Y
                            if (drawingPropertiesList.Contains(MeasureAttributes.PixelStartY.ToString()))
                            {
                                sizeF = g.MeasureString(frontStr + "" + startPoint.Y, textfont);
                                rectangleF5.Location = new Point((int)this.PointF.X + offsetValue1 - (int)sizeF.Width / 2, (int)this.PointF.Y + offset);
                                offset += offsetValue;
                            }
                            // 物理起始点X
                            if (drawingPropertiesList.Contains(MeasureAttributes.PhysicalStartX.ToString()))
                            {
                                sizeF = g.MeasureString(frontStr + "" + Math.Round(startPoint.X * unitLength, decimalPlaces), textfont);
                                rectangleF6.Location = new Point((int)this.PointF.X + offsetValue1 - (int)sizeF.Width / 2, (int)this.PointF.Y + offset);
                                offset += offsetValue;
                            }
                            // 物理起始点Y
                            if (drawingPropertiesList.Contains(MeasureAttributes.PhysicalStartY.ToString()))
                            {
                                sizeF = g.MeasureString(frontStr + "" + Math.Round(startPoint.Y * unitLength, decimalPlaces), textfont);
                                rectangleF7.Location = new Point((int)this.PointF.X + offsetValue1 - (int)sizeF.Width / 2, (int)this.PointF.Y + offset);
                                offset += offsetValue;
                            }
                        }
                    }
                    if (drawingPropertiesList != null)
                    {
                        // 测量方式
                        if (drawingPropertiesList.Contains(MeasureAttributes.MeasureMethod.ToString()))
                        {
                            sizeF = g.MeasureString(frontStr + "" + PdnResources.GetString("Menu.MeasureAction.PolygonMeasurement.Text"), textfont);
                            rectangleF1.Width = sizeF.Width;
                            rectangleF1.Height = sizeF.Height;
                            g.DrawString(frontStr + "" + PdnResources.GetString("Menu.MeasureAction.PolygonMeasurement.Text"), textfont, textbrush, rectangleF1);
                        }
                        else
                        {
                            rectangleF1 = new RectangleF();
                        }
                        // 测量单位(中文)
                        if (drawingPropertiesList.Contains(MeasureAttributes.MeasureUnitCN.ToString()))
                        {
                            sizeF = g.MeasureString(frontStr + "" + this.unitString, textfont);
                            rectangleF2.Width = sizeF.Width;
                            rectangleF2.Height = sizeF.Height;
                            g.DrawString(frontStr + "" + this.unitString, textfont, textbrush, rectangleF2);
                        }
                        else
                        {
                            rectangleF2 = new RectangleF();
                        }
                        // 测量单位(英文)
                        if (drawingPropertiesList.Contains(MeasureAttributes.MeasureUnitEN.ToString()))
                        {
                            sizeF = g.MeasureString(frontStr + "" + this.unit, textfont);
                            rectangleF3.Width = sizeF.Width;
                            rectangleF3.Height = sizeF.Height;
                            g.DrawString(frontStr + "" + this.unit, textfont, textbrush, rectangleF3);
                        }
                        else
                        {
                            rectangleF3 = new RectangleF();
                        }
                        // 像素起始点X
                        if (drawingPropertiesList.Contains(MeasureAttributes.PixelStartX.ToString()))
                        {
                            sizeF = g.MeasureString(frontStr + "" + startPoint.X, textfont);
                            rectangleF4.Width = sizeF.Width;
                            rectangleF4.Height = sizeF.Height;
                            g.DrawString(frontStr + "" + startPoint.X, textfont, textbrush, rectangleF4);
                        }
                        else
                        {
                            rectangleF4 = new RectangleF();
                        }
                        // 像素起始点Y
                        if (drawingPropertiesList.Contains(MeasureAttributes.PixelStartY.ToString()))
                        {
                            sizeF = g.MeasureString(frontStr + "" + startPoint.Y, textfont);
                            rectangleF5.Width = sizeF.Width;
                            rectangleF5.Height = sizeF.Height;
                            g.DrawString(frontStr + "" + startPoint.Y, textfont, textbrush, rectangleF5);
                        }
                        else
                        {
                            rectangleF5 = new RectangleF();
                        }
                        // 物理起始点X
                        if (drawingPropertiesList.Contains(MeasureAttributes.PhysicalStartX.ToString()))
                        {
                            sizeF = g.MeasureString(frontStr + "" + Math.Round(startPoint.X * unitLength, decimalPlaces), textfont);
                            rectangleF6.Width = sizeF.Width;
                            rectangleF6.Height = sizeF.Height;
                            g.DrawString(frontStr + "" + Math.Round(startPoint.X * unitLength, decimalPlaces), textfont, textbrush, rectangleF6);
                        }
                        else
                        {
                            rectangleF6 = new RectangleF();
                        }
                        // 物理起始点Y
                        if (drawingPropertiesList.Contains(MeasureAttributes.PhysicalStartY.ToString()))
                        {
                            sizeF = g.MeasureString(frontStr + "" + Math.Round(startPoint.Y * unitLength, decimalPlaces), textfont);
                            rectangleF7.Width = sizeF.Width;
                            rectangleF7.Height = sizeF.Height;
                            g.DrawString(frontStr + "" + Math.Round(startPoint.Y * unitLength, decimalPlaces), textfont, textbrush, rectangleF7);
                        }
                        else
                        {
                            rectangleF7 = new RectangleF();
                        }
                        // 像素面积
                        if (drawingPropertiesList.Contains(MeasureAttributes.PixelArea.ToString()))
                        {
                            sizeF = g.MeasureString("" + Math.Round(this.area, decimalPlaces) + "px²", textfont);
                            rectangleF8.Width = sizeF.Width;
                            rectangleF8.Height = sizeF.Height;
                            g.DrawString(frontStr + "" + Math.Round(this.area, decimalPlaces) + "px²", textfont, textbrush, rectangleF8);
                        }
                        else
                        {
                            rectangleF8 = new RectangleF();
                        }
                        // 物理面积
                        if (drawingPropertiesList.Contains(MeasureAttributes.PhysicalArea.ToString()))
                        {
                            string s = Math.Round(this.area * unitLength, decimalPlaces).ToString();
                            if (s.IndexOf(".") == -1)
                            {
                                for (int i = 0; i < decimalPlaces; i++)
                                {
                                    if (i == 0)
                                        s += ".";
                                    s += "0";
                                }
                            }
                            else
                            {
                                int a = s.Length - s.IndexOf(".") - 1;
                                if (a < decimalPlaces)
                                {
                                    for (int i = 0; i < decimalPlaces - a; i++)
                                    {
                                        s += "0";
                                    }
                                }
                            }

                            sizeF = g.MeasureString(frontStr + s + this.unit + "²", textfont);
                            rectangleF9.Width = sizeF.Width;
                            rectangleF9.Height = sizeF.Height;
                            g.DrawString(frontStr + s + this.unit + "²", textfont, textbrush, rectangleF9);
                        }
                        else
                        {
                            rectangleF9 = new RectangleF();
                        }
                        // 像素周长
                        if (drawingPropertiesList.Contains(MeasureAttributes.PixelCircumference.ToString()))
                        {
                            sizeF = g.MeasureString(frontStr + "" + Math.Round(this.length, decimalPlaces) + "px", textfont);
                            rectangleF10.Width = sizeF.Width;
                            rectangleF10.Height = sizeF.Height;
                            g.DrawString(frontStr + "" + Math.Round(this.length, decimalPlaces) + "px", textfont, textbrush, rectangleF10);
                        }
                        else
                        {
                            rectangleF10 = new RectangleF();
                        }
                        // 物理周长 
                        if (drawingPropertiesList.Contains(MeasureAttributes.PhysicalCircumference.ToString()))
                        {
                            string s = Math.Round(this.length * unitLength, decimalPlaces).ToString();
                            if (s.IndexOf(".") == -1)
                            {
                                for (int i = 0; i < decimalPlaces; i++)
                                {
                                    if (i == 0)
                                        s += ".";
                                    s += "0";
                                }
                            }
                            else
                            {
                                int a = s.Length - s.IndexOf(".") - 1;
                                if (a < decimalPlaces)
                                {
                                    for (int i = 0; i < decimalPlaces - a; i++)
                                    {
                                        s += "0";
                                    }
                                }
                            }
                            sizeF = g.MeasureString(frontStr + s + this.unit, textfont);
                            rectangleF11.Width = sizeF.Width;
                            rectangleF11.Height = sizeF.Height;
                            g.DrawString(frontStr + s + this.unit, textfont, textbrush, rectangleF11);
                        }
                        else
                        {
                            rectangleF11 = new RectangleF();
                        }
                        //还原为原始旋转矩阵
                        g.Transform = mtxSave;
                    }
                }
                matrix.Dispose();
                if (this.configurationFile)
                    this.pointChange = false;
                this.mouseUpAttribute = false;
                pointChangeObject.Remove(this.drawToolType);
            }
        }
        /// <summary>
        /// 停止绘制时
        /// </summary>
        /// <param name="up"></param>
        public override void MouseUp(bool up)
        {
            mouseUpPointChange = up;
        }
        public void CalcCenter()
        {
            centerPoint = new PointF(rectangle.X + rectangle.Width / 2, rectangle.Y + rectangle.Height / 2);//中心点
        }

        public override int HandleCount
        {
            get
            {
                return 7;
            }
        }

        /// <summary>
        /// Get handle pointscroll by 1-based number
        /// </summary>
        /// <param name="handleNumber"></param>
        /// <returns></returns>
        public override PointF GetHandle(int handleNumber)
        {
            float x = 0;
            float y = 0;

            switch (handleNumber)
            {
                case 1:
                    x = (int)pointArray[0].X;
                    y = (int)pointArray[0].Y;
                    break;
                case 2:
                    x = (int)pointArray[1].X;
                    y = (int)pointArray[1].Y;
                    break;
                case 3:
                    x = largerRect.X;
                    y = largerRect.Y;
                    break;
                case 4:
                    x = largerRect.Right;
                    y = largerRect.Y;
                    break;
                case 5:
                    x = largerRect.Right;
                    y = largerRect.Bottom;
                    break;
                case 6:
                    x = largerRect.X;
                    y = largerRect.Bottom;
                    break;
                case 7:
                    x = this.pointL.X;
                    y = this.pointL.Y;
                    break;

            }

            return new PointF(x, y);
        }

        /// <summary>
        /// Hit test.
        /// Return value: -1 - no hit
        ///                0 - hit anywhere
        ///                > 1 - handle number
        /// </summary>
        /// <param name="pointscroll"></param>
        /// <returns></returns>
        public override int HitTest(Point point)
        {
            if (Selected)
            {
                for (int i = 1; i <= HandleCount; i++)
                {
                    if (GetHandleRectangle(i).Contains(point))
                        return i;
                }
                if (GetRectanglePosition(this.rectangleF1, point,  this.PointF , angle))
                {
                    this.pointL = SetOffsetAfterRotation(point,  this.PointF , angle);
                    moveKb = 1;
                    return 7;
                }
                else if (GetRectanglePosition(this.rectangleF2, point,  this.PointF , angle))
                {
                    this.pointL = SetOffsetAfterRotation(point,  this.PointF , angle);
                    moveKb = 2;
                    return 7;
                }
                else if (GetRectanglePosition(this.rectangleF3, point,  this.PointF , angle))
                {
                    this.pointL = SetOffsetAfterRotation(point,  this.PointF , angle);
                    moveKb = 3;
                    return 7;
                }
                else if (GetRectanglePosition(this.rectangleF4, point,  this.PointF , angle))
                {
                    this.pointL = SetOffsetAfterRotation(point,  this.PointF , angle);
                    moveKb = 4;
                    return 7;
                }
                else if (GetRectanglePosition(this.rectangleF5, point,  this.PointF , angle))
                {
                    this.pointL = SetOffsetAfterRotation(point,  this.PointF , angle);
                    moveKb = 5;
                    return 7;
                }
                else if (GetRectanglePosition(this.rectangleF6, point,  this.PointF , angle))
                {
                    this.pointL = SetOffsetAfterRotation(point,  this.PointF , angle);
                    moveKb = 6;
                    return 7;
                }
                else if (GetRectanglePosition(this.rectangleF7, point,  this.PointF , angle))
                {
                    this.pointL = SetOffsetAfterRotation(point,  this.PointF , angle);
                    moveKb = 7;
                    return 7;
                }
                else if (GetRectanglePosition(this.rectangleF8, point,  this.PointF , angle))
                {
                    this.pointL = SetOffsetAfterRotation(point,  this.PointF , angle);
                    moveKb = 8;
                    return 7;
                }
                else if (GetRectanglePosition(this.rectangleF9, point,  this.PointF , angle))
                {
                    this.pointL = SetOffsetAfterRotation(point,  this.PointF , angle);
                    moveKb = 9;
                    return 7;
                }
                else if (GetRectanglePosition(this.rectangleF10, point,  this.PointF , angle))
                {
                    this.pointL = SetOffsetAfterRotation(point,  this.PointF , angle);
                    moveKb = 10;
                    return 7;
                }
                else if (GetRectanglePosition(this.rectangleF11, point,  this.PointF , angle))
                {
                    this.pointL = SetOffsetAfterRotation(point,  this.PointF , angle);
                    moveKb = 11;
                    return 7;
                }
            }

            if (PointInObject(point))
                return 0;

            return -1;
        }

        protected override bool PointInObject(Point point)
        {
            return largerRect.Contains(point);
        }

        public override bool IntersectsWith(Rectangle rectangle)
        {
            return largerRect.IntersectsWith(rectangle);
        }

        public override Cursor GetHandleCursor(int handleNumber)
        {
            return handleCursor;
        }

        public override void MoveHandleTo(Point point, int handleNumber)
        {
            if (handleNumber < 3)
            {
                this.mouseUpPointChange = true;
                switch (handleNumber)
                {
                    case 1:
                        this.rectangleF1.Offset(point.X - this.pointArray[0].X, point.Y - this.pointArray[0].Y);
                        this.rectangleF2.Offset(point.X - this.pointArray[0].X, point.Y - this.pointArray[0].Y);
                        this.rectangleF3.Offset(point.X - this.pointArray[0].X, point.Y - this.pointArray[0].Y);
                        this.rectangleF4.Offset(point.X - this.pointArray[0].X, point.Y - this.pointArray[0].Y);
                        this.rectangleF5.Offset(point.X - this.pointArray[0].X, point.Y - this.pointArray[0].Y);
                        this.rectangleF6.Offset(point.X - this.pointArray[0].X, point.Y - this.pointArray[0].Y);
                        this.rectangleF7.Offset(point.X - this.pointArray[0].X, point.Y - this.pointArray[0].Y);
                        this.rectangleF8.Offset(point.X - this.pointArray[0].X, point.Y - this.pointArray[0].Y);
                        this.rectangleF9.Offset(point.X - this.pointArray[0].X, point.Y - this.pointArray[0].Y);
                        this.rectangleF10.Offset(point.X - this.pointArray[0].X, point.Y - this.pointArray[0].Y);
                        this.rectangleF11.Offset(point.X - this.pointArray[0].X, point.Y - this.pointArray[0].Y);

                        //更新第一个点
                        startPoint = point;
                        this.pointArray[0] = startPoint;
                        //计算第三个点
                        linePoint.X = (startPoint.X - startPoint.Y + endPoint.X + endPoint.Y) / 2;
                        linePoint.Y = (startPoint.X + startPoint.Y - endPoint.X + endPoint.Y) / 2;
                        this.pointArray[2] = linePoint;
                        //计算第四个点
                        linePoint1.X = (startPoint.X + startPoint.Y + endPoint.X - endPoint.Y) / 2;
                        linePoint1.Y = (-(startPoint.X) + startPoint.Y + endPoint.X + endPoint.Y) / 2;
                        this.pointArray[3] = linePoint1;
                        break;
                    case 2:
                        endPoint = point;
                        this.pointArray[1] = endPoint;
                        //计算第三个点
                        linePoint.X = (startPoint.X - startPoint.Y + endPoint.X + endPoint.Y) / 2;
                        linePoint.Y = (startPoint.X + startPoint.Y - endPoint.X + endPoint.Y) / 2;
                        if (this.pointArray.Count == 2)
                        {
                            this.pointArray.Add(linePoint);
                        }
                        else
                        {
                            this.pointArray[2] = linePoint;
                        }
                        //计算第四个点
                        linePoint1.X = (startPoint.X + startPoint.Y + endPoint.X - endPoint.Y) / 2;
                        linePoint1.Y = (-(startPoint.X) + startPoint.Y + endPoint.X + endPoint.Y) / 2;
                        if (this.pointArray.Count == 3)
                        {
                            this.pointArray.Add(linePoint1);
                        }
                        else
                        {
                            this.pointArray[3] = linePoint1;
                        }
                        break;
                }
                if(this.pointArray.Count == 4)
                {
                    CalcOtherRectangle();
                    CalcCenter();
                }
            }
            else
            {
                float x = 0, y = 0;
                switch (handleNumber)
                {
                    case 3:
                        this.mouseUpPointChange = true;
                        x = largerRect.X;
                        y = largerRect.Y;
                        break;
                    case 4:
                        this.mouseUpPointChange = true;
                        x = largerRect.Right;
                        y = largerRect.Y;
                        break;
                    case 5:
                        this.mouseUpPointChange = true;
                        x = largerRect.Right;
                        y = largerRect.Bottom;
                        break;
                    case 6:
                        this.mouseUpPointChange = true;
                        x = largerRect.X;
                        y = largerRect.Bottom;
                        break;
                    case 7:
                        point = SetOffsetAfterRotation(point, this.PointF, angle);
                        if (this.moveKb == 1)
                            this.rectangleF1.Offset(point.X - this.pointL.X, point.Y - this.pointL.Y);
                        else if (this.moveKb == 2)
                            this.rectangleF2.Offset(point.X - this.pointL.X, point.Y - this.pointL.Y);
                        else if (this.moveKb == 3)
                            this.rectangleF3.Offset(point.X - this.pointL.X, point.Y - this.pointL.Y);
                        else if (this.moveKb == 4)
                            this.rectangleF4.Offset(point.X - this.pointL.X, point.Y - this.pointL.Y);
                        else if (this.moveKb == 5)
                            this.rectangleF5.Offset(point.X - this.pointL.X, point.Y - this.pointL.Y);
                        else if (this.moveKb == 6)
                            this.rectangleF6.Offset(point.X - this.pointL.X, point.Y - this.pointL.Y);
                        else if (this.moveKb == 7)
                            this.rectangleF7.Offset(point.X - this.pointL.X, point.Y - this.pointL.Y);
                        else if (this.moveKb == 8)
                            this.rectangleF8.Offset(point.X - this.pointL.X, point.Y - this.pointL.Y);
                        else if (this.moveKb == 9)
                            this.rectangleF9.Offset(point.X - this.pointL.X, point.Y - this.pointL.Y);
                        else if (this.moveKb == 10)
                            this.rectangleF10.Offset(point.X - this.pointL.X, point.Y - this.pointL.Y);
                        else if (this.moveKb == 11)
                            this.rectangleF11.Offset(point.X - this.pointL.X, point.Y - this.pointL.Y);
                        this.pointL = point;
                        break;
                }
                if(handleNumber != 7)
                {
                    this.mouseUpPointChange = true;
                    if (!this.isPress)
                    {
                        this.isPress = true;
                        lastPoint = new PointF(x, y);
                    }

                    double angle = BasicCalculationHelper.CalculateAngle(centerPoint.X, centerPoint.Y, lastPoint.X, lastPoint.Y, point.X, point.Y);
                    lastPoint = point;

                    for (int l = 0; l < pointArray.Count; l++)
                    {
                        pointArray[l] = BasicCalculationHelper.GetAnglePoint(pointArray[l], centerPoint, angle);
                    }
                    startPoint = BasicCalculationHelper.GetAnglePoint(startPoint, centerPoint, angle);
                    endPoint = BasicCalculationHelper.GetAnglePoint(endPoint, centerPoint, angle);
                    linePoint = BasicCalculationHelper.GetAnglePoint(linePoint, centerPoint, angle);
                    linePoint1 = BasicCalculationHelper.GetAnglePoint(linePoint1, centerPoint, angle);
                    CalcOtherRectangle();
                }
            }
        }

        /// <summary>
        /// 计算外接矩形
        /// </summary>
        private void CalcOtherRectangle()
        {
            float[] pointX = new float[] { pointArray[0].X, pointArray[1].X, pointArray[2].X, pointArray[3].X };
            rectangle.X = (int)pointX.Min();
            float[] pointY = new float[] { pointArray[0].Y, pointArray[1].Y, pointArray[2].Y, pointArray[3].Y };
            rectangle.Y = (int)pointY.Min();
            rectangle.Width = (int)Math.Abs(pointX.Max() - pointX.Min());
            rectangle.Height = (int)Math.Abs(pointY.Max() - pointY.Min());
        }

        /// <summary>
        /// 对象移动
        /// </summary>
        /// <param name="deltaX"></param>
        /// <param name="deltaY"></param>
        public override void Move(int deltaX, int deltaY)
        {
            int x = ISurfaceBox.UnscaleScalar(deltaX);
            int y = ISurfaceBox.UnscaleScalar(deltaY);

            startPoint.X += x;
            startPoint.Y += y;

            endPoint.X += x;
            endPoint.Y += y;

            linePoint.X += x;
            linePoint.Y += y;

            linePoint1.X += x;
            linePoint1.Y += y;

            for (int i = 0; i < pointArray.Count; i++)
            {
                pointArray[i] = new PointF(pointArray[i].X + ISurfaceBox.UnscaleScalar(deltaX), pointArray[i].Y + ISurfaceBox.UnscaleScalar(deltaY));
            }
            this.startPoint = pointArray[0];
            pointL.X += x;
            pointL.Y += y;
            this.rectangleF1.Offset(x, y);
            this.rectangleF2.Offset(x, y);
            this.rectangleF3.Offset(x, y);
            this.rectangleF4.Offset(x, y);
            this.rectangleF5.Offset(x, y);
            this.rectangleF6.Offset(x, y);
            this.rectangleF7.Offset(x, y);
            this.rectangleF8.Offset(x, y);
            this.rectangleF9.Offset(x, y);
            this.rectangleF10.Offset(x, y);
            this.rectangleF11.Offset(x, y);
            CalcOtherRectangle();
            CalcCenter();
        }

        public override RectangleF GetBoundingBox()
        {
            RectangleF temp = new RectangleF();
            temp.X = rectangle.X - 10;
            temp.Y = rectangle.Y - 10;
            temp.Width = rectangle.Width + 20;
            temp.Height = rectangle.Height + 20;
            return temp;
        }

        /// <summary>
        /// Draw tracker for selected object
        /// </summary>
        /// <param name="g"></param>
        public override void DrawTracker(Graphics g)
        {
            if (!Selected)
                return;

            if (pointArray.Count >= 4)
            {

                    SolidBrush brush = new SolidBrush(Color.FromArgb(MarkpointAreaColor));
                    Pen pen = new Pen(Color.FromArgb(MarkpointLineColor), MarkpointLineWidth);
                    largerRect = GetBoundingBox();
                    for (int i = 1; i <= HandleCount; i++)
                    {
                        if (i == HandleCount)
                        {
                            brush = new SolidBrush(Color.Transparent);
                            pen = new Pen(Color.Transparent);
                        }
                        switch (MarkpointStyle)
                        {
                            case 0:
                                g.FillRectangle(brush, GetHandleRectangle(i));
                                g.DrawRectangle(pen, GetHandleRectangle(i));
                                break;
                            case 1:
                                g.FillEllipse(brush, GetHandleRectangle(i));
                                g.DrawEllipse(pen, GetHandleRectangle(i));
                                break;
                            case 2:
                                g.FillPolygon(brush, GetHandlePoint(i));
                                g.DrawPolygon(pen, GetHandlePoint(i));
                                break;
                        }
                    }

                brush.Dispose();
                pen.Dispose();
            }
        }

        /// <summary>
        /// 获取点集合
        /// </summary>
        /// <returns></returns>
        public override List<PointF> GetPoints()
        {
            return pointArray;
        }

        /// <summary>
        /// 获取样式
        /// </summary>
        /// <returns></returns>
        public override ParentStyleModel GetStyle()
        {
            return measureRandSquare;
        }
    }
}