OTS/OTSIncAReportApp/1-UI/Control_Graph/Controls/Control_DrawDistrbutionImageAndBSE.cs

using NLog;
using OTSIncAReportApp;
using OTSIncAReportApp.DataOperation.DataAccess;
using OTSIncAReportApp.DataOperation.Model;
using OTSIncAReportApp.OTSSampleReportInfo;
using OTSIncAReportApp.SysMgrTools;
using OTSIncAReportGraph.Class;

using OTSIncAReportGraph.OTSIncAReportGraphFuncation;
using OTSIncAReportMailInterface;
using OTSPeriodicTable;

using System;
using System.Collections.Generic;
using System.Data;
using System.Diagnostics;
using System.Drawing;
using System.Drawing.Drawing2D;
using System.IO;
using System.Linq;
using System.Threading;
using System.Windows.Forms;
using System.Xml;

namespace OTSIncAReportGraph.Controls
{
    public enum SelectedShape
    {        
        Rectangle=0,
        Ellipse = 1
    }
    public struct SelectTool
    {
       public SelectedShape Shape;
       public Point StartPoint;
       public bool IsSelecting;
        //进行选择的矩形范围
       public RectangleF Rect ;

    }
    public enum RightButtonMenu
    { 
       Include=0,
      
       MoveSEMToParticle=1,
       CopyImage=2
    
    }
    public partial class Control_DrawDistrbutionImageAndBSE : UserControl
    {

  
        //缩放的增大缩小的增量
        private const float const_zoom_increment = 0.05f;

        //最大缩放倍数
        private const float m_f_zoom_max = 4f;

        //最小缩放倍数
        private  float m_f_zoom_mix = 0.05f;

      

        //标尺原先大小的记录，参与计算
        private const float m_f_old_ruler_size = 100;

        //int m_operator_currentid;
        double ls_d_cz_width;
        double ls_d_cz_height;
        #region 变量定义
        private SelectTool m_SelectTool;
        //缩放的基数,临时变量
        private float m_Zoom_Base = 0;

        //与原先缩放的记录数
        private float m_zoom_record = 1;

        //标尺的大小记录
        public float m_f_ruler_size = 100;
        //每像素代表的尺寸大小,还不知道在哪里进行计算
        public float m_pixelSize = 4.5f;
   
        //国际化存储信息
        System.Collections.Hashtable table;

        //包含particle的field的列表对象
        public List<DisplayField> m_list_allDfield = null;


        //这里要做成控件，不要是窗体
        public List<BaseObject> m_list_allDPart = null;
 


        //总背景矩形
        public RectangleF m_backRect = new RectangleF();

        //记录原值，总背景矩形
        public RectangleF m_old_backRect = new RectangleF();


        //记录总物理矩形总大小
        public RectangleF m_back_wl_rectf = new RectangleF();

        //是否显示网格线
        private bool m_is_showgrid = false;

        //绘制的网格中，需要几条线,宽
        public double m_i_grid_showlinesnumber_width = 0;

        //绘制的网格中，需要几条线,高
        public double m_i_grid_showlinesnumber_height = 0;


        //是否拖动
        private bool m_isDrag = false;

        //拖动前的坐标记录
        private PointF m_beforedrag_pointf = new PointF();


        //提供鼠标在右下角显示的文本，左侧
        private string m_str_mouseshow_left = "";

        //提供鼠标在右下角显示的文本,右侧
        private string m_str_mouseshow_right = "";

        //整个背景矩形的背景色
        private Color m_backrangecolor = Color.White;

     

        OTSImageDisHelp m_ReportFun = null;

        //当前鼠标的位置
        Point m_mouse_now_point = new Point();

        //记录当前鼠标位置对应SEM电镜的位置
        Point m_sem_mouse_now_point = new Point();

        //鼠标移动经过的颗粒对象，临时存放，用来记录是否要显示xray与隐藏xray
        DisplayParticle m_mouseOver_dparticle = null;

        //保存数据源名称
        private string m_showsourcename = "";

        //保存当前数据源的ID
        private int m_datasourceid = 0;

        //移动SEM到指定位置发生线程
        private Thread m_mythread;

        //记录线程是否已经运行完成的状态
        //private bool m_mythread_state = false;

        private Color m_ColorNotContent = Color.SkyBlue;

        //读取背景原图的名称和图片
        private Dictionary<string, Image> originalImages = new Dictionary<string, Image>();
        //private List<string> originalImageNames = new List<string>();
        //背景使用原图
        private bool OriginalBackground = false;

        static System.Windows.Forms.Timer delaytimer = new System.Windows.Forms.Timer();
        Logger log;
        /// <summary>
        /// 当前正在显示的数据源名称，用来与框架调用条件判断使用
        /// </summary>
        public string ShowSourceName
        {
            set { m_showsourcename = value; }
            get { return m_showsourcename; }
        }

        /// <summary>
        /// 当前正在显示的数据源的ID
        /// </summary>
        public int DataSourceID
        {
            set { m_datasourceid = value; }
            get { return m_datasourceid; }
        }
        /// <summary>
        /// 背景矩形属性
        /// </summary>
        public RectangleF BackRectF
        {
            set { m_backRect = value; }
            get { return m_backRect; }
        }

        public OTSImageDisHelp ReportFun { get => m_ReportFun; set => m_ReportFun = value; }

        //测试用隐藏颗粒的id号，回头去掉
        public int test_hide_particle_tagid = 1000;

        //进度条窗体
        public Frm_UserProgress m_frm_userprogress;

        /// <summary>
        /// 是否显示过小颗粒
        /// </summary>
        public bool bShowSmallParticle = false;

  

        OTSIncAReportApp.frmReportApp m_ReportApp;
        ResultFile resultFile = null;


        #endregion

        #region 构造函数及窗体加载
    
        public Control_DrawDistrbutionImageAndBSE(OTSIncAReportApp.frmReportApp ReportApp)
        {
            log = NLog.LogManager.GetCurrentClassLogger();
            m_list_allDfield = new List<DisplayField>();
            m_list_allDPart = new List<BaseObject>();
         
            m_frm_userprogress = new Frm_UserProgress();
            
            //m_mythread_state = false;

            m_mythread = new Thread(new ParameterizedThreadStart(Thread_GO));
            
            m_ReportApp = ReportApp;
            resultFile = m_ReportApp.m_rstDataMgr.CurResultFile;

            //初始化底层操作类
            ReportFun = new OTSImageDisHelp(resultFile);
            InitializeComponent();
            #region 国际化语言
            Language lan = new Language(this);
            table = lan.GetNameTable(this.Name);
            #endregion

            //load the userdefine control dynamically
            System.ComponentModel.ComponentResourceManager resources = new System.ComponentModel.ComponentResourceManager(typeof(Control_DrawDistrbutionImageAndBSE));
           
            this.control_XRayTable1 = new Control_XRayTable();
            this.control_XRayTable1.BackColor = System.Drawing.Color.FromArgb(((int)(((byte)(180)))), ((int)(((byte)(255)))), ((int)(((byte)(255)))), ((int)(((byte)(255)))));
            this.control_XRayTable1.Dock = System.Windows.Forms.DockStyle.Bottom;
            this.control_XRayTable1.GBInfoStr = "";
            this.control_XRayTable1.GoodChineseName = "";
            this.control_XRayTable1.MaterialName = "";
            this.control_XRayTable1.List_ShowElementInfo = ((System.Collections.Generic.List<OTSIncAReportGraph.Controls.ShowElementInfo>)(resources.GetObject("control_XRayTable1.List_ShowElementInfo")));
            this.control_XRayTable1.Location = new System.Drawing.Point(0, 400);
            this.control_XRayTable1.Name = "control_XRayTable1";
            this.control_XRayTable1.ShowAnalysisXray = true;
            this.control_XRayTable1.ShowSearchXray = false;
            this.control_XRayTable1.Size = new System.Drawing.Size(1004, 200);
            this.control_XRayTable1.STDName = "";
            this.control_XRayTable1.TabIndex = 6;
            this.control_XRayTable1.Visible = false;
            // 
            // control_Ruler1
            // 
            this.control_Ruler1 = new Control_Ruler();
            this.control_Ruler1.BackColor = System.Drawing.Color.FromArgb(((int)(((byte)(200)))), ((int)(((byte)(255)))), ((int)(((byte)(255)))), ((int)(((byte)(255)))));
            this.control_Ruler1.Location = new System.Drawing.Point(3, 400);
            this.control_Ruler1.Name = "control_Ruler1";
            this.control_Ruler1.RulerWidth = 100;
            this.control_Ruler1.ShowString = "100um";
            this.control_Ruler1.Size = new System.Drawing.Size(120, 40);
            this.control_Ruler1.TabIndex = 8;
            this.control_Ruler1.Value = 0D;
            this.control_Ruler1.Visible = false;
            this.Controls.Add(this.control_XRayTable1);
            this.Controls.Add(this.control_Ruler1);
        }
        private void ProgressBarUpdate(int progress, string message)
        {
            //显示进度条,计算进度条应该显示的位置和宽度
            if (m_frm_userprogress.Visible == false)
            {
                Form ls_main_form = this.ParentForm.ParentForm;//取出父窗体
                m_frm_userprogress.Width = (int)(MyPrimaryScreen.DESKTOP.Width / MyPrimaryScreen.ScaleX * 0.9);
                m_frm_userprogress.Location = new Point(ls_main_form.Location.X + 80, ls_main_form.Location.Y + (int)(MyPrimaryScreen.DESKTOP.Height / MyPrimaryScreen.ScaleX) / 2);
                m_frm_userprogress.Show();
            }

            m_frm_userprogress.SetProgressValueAndText(progress, message);

        }
        private void Control_DrawDistrbutionImageAndBSE_Load(object sender, EventArgs e)
        {


            ProgressBarUpdate(0, table["str1"].ToString());


            //执行获取颗粒分布图数据，总过程函数
            GetDistrbutionImageAndBSE_Total();

            //设置双缓冲
            SetDoubleBufferByIsDraw();

            //设置标尺
            //根据f_onepixel_size计算出要显示出100um的实际宽度
            double d_onefixel_width = 100 / m_pixelSize;
            if (d_onefixel_width == 0)
            {
                this.control_Ruler1.Visible = false;
            }
            else
            {
                //将标尺定位到合理的位置上
                this.control_Ruler1.Location = new Point(10, MyPrimaryScreen.WorkingArea.Height - 300);
                this.control_Ruler1.Visible = true;
                this.control_Ruler1.SetValue(m_f_ruler_size, m_pixelSize);
            }

            //记录原值，用于缩放计算操作 ,此处要用克隆 ,原particle颗粒的值，在底层调用时已经赋值过了
            foreach (DisplayParticle ls_dp in m_list_allDPart)
            {
                ls_dp.SetPaintState(PaintState.NORMALPAINT);
                DisplayParticle old_dp = ls_dp.Clone() as DisplayParticle;
                ReportFun. m_original_list_baseobject.Add(old_dp);
            }

            //加载时将背景rect设置与整个窗体一边大小
            m_old_backRect = m_backRect;

            ////赋值给old保存原值
            for (int i = 0; i < m_list_allDfield.Count; i++)
            {
                DisplayField df = new DisplayField(m_list_allDfield[i].List_DParticle);
                df.Show_Rect = new RectangleF(m_list_allDfield[i].Show_Rect.X,
                    m_list_allDfield[i].Show_Rect.Y,
                    m_list_allDfield[i].Show_Rect.Width,
                    m_list_allDfield[i].Show_Rect.Height);
               ReportFun. m_original_list_dfield.Add(df);
            }

      

            ProgressBarUpdate(100, table["str2"].ToString());

            

            //加载完成，关闭进度条
            m_frm_userprogress.Close();
            
        }
        /// <summary>
        /// 获取组整个获取分布图和排序图图像数据的底层数据组建方式,的总过程
        /// </summary>
        public void GetDistrbutionImageAndBSE_Total()
        {
            string str27 = "begin to loading data....";
            log.Info(str27);
            Application.DoEvents();
            ProgressBarUpdate(1, str27);


          
            List<Field> fieldlist = resultFile.List_OTSField;

            //防止有时底层返回的Field的List是0,直接返回
            if (fieldlist.Count == 0)
            {
              

                ProgressBarUpdate(100, "field number =0 !....");
                return;
            }


            string str29 = "begin to composit field picture....";
            log.Info(str29);
            Application.DoEvents();
            ProgressBarUpdate(15, str29);

         

            //第一次循环，用来计算单个Field的像素分辨率，和将所有的物理位置存放到List当中
            List<Point> list_point = new List<Point>();
            int fieldwidth = 0, fieldheight = 0;
            //获取到该field的分辨率大小，循环中都是一样的

            if (fieldlist.Count > 0)
            {
                Bitmap bitmp = DrawFunction.ReadImageFile(fieldlist[0].FieldImage);
                fieldwidth = bitmp.Width;
                fieldheight = bitmp.Height;
            }

            for (int i = 0; i < fieldlist.Count(); i++)
            {
                //然后取出物理坐标，这个一会要与分辨率坐标进行变算一下
                Point ls_point = new Point() { X = fieldlist[i].FieldPosX, Y = fieldlist[i].FieldPosY };
                list_point.Add(ls_point);
            }

         


            //计算出整个绘制图像总Rectagnle的大小
            m_backRect = ReportFun. ConvertAndGetMaxRect(list_point, fieldwidth, fieldheight);
           

           
            ProgressBarUpdate(18, "calculate ruler....");

            #region //标尺相关------------------------------------------------------------------------------
            RectangleF ls_jsblrect = ReportFun.GetPhysicalFieldWidthAndHeight(list_point,fieldwidth,fieldheight);
            //然后用宽度来除以i_field_width 获取单个的像素比例
            double d_onepixel_scale = Convert.ToDouble(ls_jsblrect.Width) / Convert.ToDouble(fieldwidth);
            //再用该比例对标尺进行相应的赋值
            m_pixelSize = (float)d_onepixel_scale;

 
            #endregion //---------------------------------------------------------------------------------------

        

            ProgressBarUpdate(20, "composit whole picture....");

            //70的进度条给到下面的循环中,计算进度条各分类进度分配
            float ls_int_progresscalc = 0;
            if (fieldlist.Count > 0)
                ls_int_progresscalc = (float)70 / (float)fieldlist.Count;

            string str32 = "finished ";
     
            string str33 = "total ";
         
            string str34 = "field...";


            var otsLeftBottomPoint = ReportFun.GetPhysicalCoordLeftBottomPoint(list_point);
    
            for (int i = 0; i < fieldlist.Count(); i++)
            {
               
                ProgressBarUpdate(20 + (int)(ls_int_progresscalc * (i + 1)), str32 + i.ToString() + str33 + resultFile.List_OTSField.Count.ToString() + str34);

           

                //取出该Field的物理坐标，将其转换成对应的屏幕像素坐标,屏幕左上角为原点(0,0)的偏移值，用于后面计算各Segment的位置使用
               
                Point thisfield_point = new Point() { X = fieldlist[i].FieldPosX, Y = fieldlist[i].FieldPosY };
              
                
                Point offset_point = ReportFun.ConvertPhysicalCoordinateToScreenCoord(otsLeftBottomPoint, m_pixelSize, thisfield_point);//the ots coordinate is always the up right positive.
               
                DisplayField df = new DisplayField(fieldlist[i],fieldwidth,fieldheight, offset_point);
        
                m_list_allDfield.Add(df);
                m_list_allDPart.AddRange(df.List_DParticle);
              
               


            }

          

          
            ProgressBarUpdate(90, "convert solution...");

            //然后这里还需要计算出，各field的宽和高，帧图边框分别需要显示多少个框
            if (fieldwidth != 0 && fieldheight != 0)
            {
                m_i_grid_showlinesnumber_width = Convert.ToInt32(BackRectF.Width / fieldwidth);
                m_i_grid_showlinesnumber_height = Convert.ToInt32(BackRectF.Height / fieldheight);
            }
        

            ProgressBarUpdate(95, "other work...");
  
         
            //相关计数
            ReportFun.m_field_count = fieldlist.Count;
            ReportFun.m_particle_count = m_list_allDPart.Count;
        }
  
       
        /// <summary>
        /// 分布图和BSE图中，从底层获取相关结果后，重新组织显示
        /// </summary>
        /// <param name="sourceGridData"></param>
        public void FilterParticleByOtherCondition(ReportCondition sourceGridData)
        {
            bool sizeconditionResult;
            bool stdIdconditionResult;
            string stdId = "";
            int stdIdIndex = 0;
            //find the stdId condition
            var STDIdItm = sourceGridData.ConditionItemList.Find(s => s.iItemId == OTS_REPORT_PROP_GRID_ITEMS.STD_ID);
            if (STDIdItm != null)
            {
                stdId = STDIdItm.itemDisplayVal.ToString();
                stdIdIndex = STDIdItm.comboDownList.IndexOf(stdId);
            }
            //find the size condition
            var size_cal_method_type = (SIZE_CAL_METHOD_TYPE)sourceGridData.GetComboDownListIndexByItemName(OTS_REPORT_PROP_GRID_ITEMS.SIZE_CAL_METHOD_TYPE);
            var itm = sourceGridData.ConditionItemList.Find(s => s.iItemId == OTS_REPORT_PROP_GRID_ITEMS.GRAIN_SIZE_CLASS);
            string size = itm.itemDisplayVal.ToString();
            int index = itm.comboDownList.IndexOf(size);

            string min = "0";
            string max = "999";
            if (index > 0)
            {
                max = sourceGridData.ConditionItemList.Find(s => s.iItemId == OTS_REPORT_PROP_GRID_ITEMS.GRAIN_SIZE_MAX).itemDisplayVal.ToString();
                min = sourceGridData.ConditionItemList.Find(s => s.iItemId == OTS_REPORT_PROP_GRID_ITEMS.GRAIN_SIZE_MIN).itemDisplayVal.ToString();
                if (max.ToLower() == "max")
                {
                    max = "999";
                }
            }

            double dia_min = Convert.ToDouble(min);
            double dia_max = Convert.ToDouble(max);


            foreach (DisplayParticle ls_dp in m_list_allDPart)
            {
                if (index > 0)
                {
                    double diameter = 0;
                    switch (size_cal_method_type)
                    {
                        case SIZE_CAL_METHOD_TYPE.DMAX:
                            diameter = ls_dp.objParticleData.DMAX;
                            break;
                        case SIZE_CAL_METHOD_TYPE.DMIN:
                            diameter = ls_dp.objParticleData.DMIN;
                            break;
                        case SIZE_CAL_METHOD_TYPE.CIRCLE:
                            diameter = Math.Sqrt(ls_dp.objParticleData.Area / 3.14159f) * 2f;
                            break;
                        case SIZE_CAL_METHOD_TYPE.FERET:
                            diameter = ls_dp.objParticleData.FERET;
                            break;
                        default:
                            diameter = 0;
                            break;
                    }

                    if (diameter >= dia_min && diameter <= dia_max)
                    {
                        sizeconditionResult = true;

                    }
                    else
                    {
                        sizeconditionResult = false;
                    }
                }
                else 
                {
                    sizeconditionResult = true;
                }

                if (stdIdIndex > 0)// it's not "All" 
                {
                    if (ls_dp.objParticleData.TypeName != stdId)
                    {
                        stdIdconditionResult = false;
                    }
                    else
                    {
                        stdIdconditionResult = true;
                    }


                }
                else
                {
                    stdIdconditionResult = true;
                
                }
                if (stdIdconditionResult && sizeconditionResult)
                {
                    ls_dp.SetDisplayState(DisplayState.DISPLAY);
                }
                else
                {
                    ls_dp.SetDisplayState(DisplayState.NODISPLAY);

                }
                

            }

        }
        #endregion

        #region 设置双缓冲
        /// <summary>
        /// 设置双缓冲
        /// </summary>
        public void SetDoubleBufferByIsDraw()
        {
            SetStyle(ControlStyles.UserPaint, true);                    //没什么效果，开与关
            SetStyle(ControlStyles.AllPaintingInWmPaint, true);         // 禁止擦除背景,关了闪
            SetStyle(ControlStyles.OptimizedDoubleBuffer, true);   // 双缓冲,关了闪

            //上面是必须有的
            SetStyle(ControlStyles.UserMouse, true);    //执行自己的鼠标行为，这个打开后，在win7下鼠标操作明显改善

        }
        #endregion

        #region 绘制函数
        protected override void OnPaint(PaintEventArgs e)//处理重绘情况
        {
            if (OriginalBackground)
            {
                GetPic(e);
            }
            else
            {
                #region //填充个背景色矩形-----------------------------------------------
                SolidBrush b = new SolidBrush(m_backrangecolor);
                e.Graphics.FillRectangle(b, m_backRect);
                #endregion
            }





            #region //计算并进行绘制部份------------------------------------
            //log.Info(" m_f_widthAndheight_js=" +m_Zoom_Base.ToString());
 
                foreach (BaseObject item in m_list_allDPart)
                {
                    DisplayParticle dp = (DisplayParticle)item;
                    if (dp.GetPaintState() != PaintState.NOPAINT)
                    {
                        dp.OnPaint(e);
                    }
                    
                  
                }

       

            #endregion

            #region //判断是否使用了矩形或圆形工具进行多选，是的话，那么这里就开始绘制------------------------
            if (m_SelectTool.IsSelecting)
            {
                if (m_SelectTool.Shape==SelectedShape.Rectangle && m_SelectTool.Rect.Width > 0 && m_SelectTool.Rect.Height > 0)
                {
                    Graphics g = e.Graphics;

                    //绘制矩形
                    g.DrawRectangle(new Pen(Color.Blue), m_SelectTool.Rect.X, m_SelectTool.Rect.Y, m_SelectTool.Rect.Width, m_SelectTool.Rect.Height);

                    //半透明画刷
                    SolidBrush brush = new SolidBrush(Color.FromArgb(50, m_ColorNotContent));

                    //填充选择矩形
                    g.FillRectangle(brush, m_SelectTool.Rect.X, m_SelectTool.Rect.Y, m_SelectTool.Rect.Width, m_SelectTool.Rect.Height);
                }

                if (m_SelectTool.Shape == SelectedShape.Ellipse && m_SelectTool.Rect.Width > 0 && m_SelectTool.Rect.Height > 0)
                {
                    Graphics g = e.Graphics;

                    //绘制圆形
                    g.DrawEllipse(new Pen(Color.Blue), m_SelectTool.Rect.X, m_SelectTool.Rect.Y, m_SelectTool.Rect.Width, m_SelectTool.Rect.Height);

                    //半透明画刷
                    SolidBrush brush = new SolidBrush(Color.FromArgb(50, m_ColorNotContent));

                    //填充选择圆形
                    g.FillEllipse(brush, m_SelectTool.Rect.X, m_SelectTool.Rect.Y, m_SelectTool.Rect.Width, m_SelectTool.Rect.Height);
                }
            }
            #endregion

            #region 绘制网格线，帧图边框部份
            if (true == m_is_showgrid)
            {
                RectangleF ls_rect_gridline = Rectangle.Round(new RectangleF(m_backRect.X,
                   m_backRect.Y,
                  m_backRect.Width,
                   m_backRect.Height));

                //共绘制外边框，和里面横竖，各4个线
                ControlPaint.DrawBorder(e.Graphics,
                             Rectangle.Ceiling(ls_rect_gridline),
                                    Color.BurlyWood,
                                    1,
                                    ButtonBorderStyle.Solid,
                                    Color.BurlyWood,
                                    1,
                                    ButtonBorderStyle.Solid,
                                    Color.BurlyWood,
                                    1,
                                    ButtonBorderStyle.Solid,
                                    Color.BurlyWood,
                                    1,
                                    ButtonBorderStyle.Solid);

                //然后再把rectangle，横竖分成4块，画上4条横竖线
                //画横线
                for (int i = 1; i < m_i_grid_showlinesnumber_height; i++)
                {
                    double y_zl = ls_rect_gridline.Height / m_i_grid_showlinesnumber_height;
                    e.Graphics.DrawLine(new Pen(Color.BurlyWood),
                        ls_rect_gridline.X,
                     Convert.ToInt64(ls_rect_gridline.Y + y_zl * i),
                        ls_rect_gridline.X + ls_rect_gridline.Width,
                      Convert.ToInt64(ls_rect_gridline.Y + y_zl * i));
                }

                //画竖线
                for (int i = 1; i < m_i_grid_showlinesnumber_width; i++)
                {
                    double x_zl = ls_rect_gridline.Width / m_i_grid_showlinesnumber_width;
                    e.Graphics.DrawLine(new Pen(Color.BurlyWood),
                     Convert.ToInt64(ls_rect_gridline.X + x_zl * i),
                        ls_rect_gridline.Y,
                     Convert.ToInt64(ls_rect_gridline.X + x_zl * i),
                        ls_rect_gridline.Y + ls_rect_gridline.Height);
                }

            }
            #endregion

            #region 绘制鼠标跟踪线部份
            //XX虚线-----------------------------------------------
            Pen xxpen = new Pen(Color.GreenYellow, 1);
            xxpen.DashStyle = System.Drawing.Drawing2D.DashStyle.Custom;
            xxpen.DashPattern = new float[] { 5, 5 };
            //竖线
            e.Graphics.DrawLine(xxpen, 0, m_mouse_now_point.Y, m_mouse_now_point.X - 10, m_mouse_now_point.Y);
            e.Graphics.DrawLine(xxpen, m_mouse_now_point.X + 10, m_mouse_now_point.Y, this.Width, m_mouse_now_point.Y);
            //横线
            e.Graphics.DrawLine(xxpen, m_mouse_now_point.X, 0, m_mouse_now_point.X, m_mouse_now_point.Y - 10);
            e.Graphics.DrawLine(xxpen, m_mouse_now_point.X, m_mouse_now_point.Y + 10, m_mouse_now_point.X, this.Height);
            ////--------------------------------------------------------------------------------
            #endregion

        }
        #endregion

        #region 鼠标操作事件

        /// <summary>
        /// 按指定的增量刻度对整个图像进行缩放,x,y为手动缩放时当前鼠标所在的位置，如果在其它地方调用则传入0在计算过程中，不会影响
        /// </summary>
        /// <param name="zoom"></param>
        private void ImageZoomByIncrement(float zoom, float in_mouse_x, float in_mouse_y)
        {
            //先计算鼠标的位置与背景rect的位置的差值
            //用于存储锚点缩放记录原backrectf值的，一用来于计算差值
            float oldwidth = m_backRect.Width;
            float oldheight = m_backRect.Height;

         
            m_backRect.Width = (float)(m_backRect.Width + Convert.ToDouble(m_old_backRect.Width * zoom));
            m_backRect.Height = (float)(m_backRect.Height + Convert.ToDouble(m_old_backRect.Height * zoom));

            //锚点缩放补差值计算,得出差值
            float f_czx = (in_mouse_x - m_backRect.X) * ((oldwidth - m_backRect.Width) / oldwidth);
            float f_czy = (in_mouse_y - m_backRect.Y) * ((oldheight - m_backRect.Height) / oldheight);

            //对背景矩形与所有的segment进行修补差值
            m_backRect.X = m_backRect.X + f_czx;
            m_backRect.Y = m_backRect.Y + f_czy;

            for (int i = 0; i < m_list_allDPart.Count(); i++)
            {
                DisplayParticle dp = (DisplayParticle)m_list_allDPart[i];
                
                
                    //dp.displayState = DisplayState.NORMALDISPLAY;
                    for (int y = 0; y < dp.DSegments.Count(); y++)
                    {
                        //这里重新设置每条线的高度，和x,y坐标
                        DisplaySegment ds = dp.DSegments[y];
                    DisplaySegment old_ds = ((DisplayParticle)ReportFun.m_original_list_baseobject[i]).DSegments[y];
                    ds.PenWidthAndHeight = ds.PenWidthAndHeight + old_ds.PenWidthAndHeight
                        * zoom;

                    ds.Rect = new RectangleF(ds.Rect.X + old_ds.Rect.X * zoom + f_czx, ds.Rect.Y + old_ds.Rect.Y * zoom + f_czy,
                       ds.Rect.Width + old_ds.Rect.Width * zoom, ds.Rect.Height + old_ds.Rect.Height * zoom);


                }
                //获取矩形的rectangle
                dp.Rect = dp.GetRectFromDSegment();

         

                //重新计算小矩形边框
                dp.SmallRect = dp.GetSmallRectangleFromRect();
                //设置缩放到多少倍时进行显示
                if (m_zoom_record >= dp.Zoom_DisPlayThreshold)
                {
                    dp.SetPaintState(PaintState.NORMALPAINT);
                }
                else
                {
                    dp.SetPaintState(PaintState.CONCISEPAINT);
                }


                if (dp.Rect.Left < -120 || dp.Rect.Right > this.Width+120 || dp.Rect.Top < -120 || dp.Rect.Bottom > this.Height+120)
                {
                    dp.SetPaintState(PaintState.NOPAINT);//the particles which are out of screen don't display.to speed up the display efficient.
                }
               

               
            }
            if (m_list_allDfield != null)
            {
                if (m_list_allDfield.Count > 0)
                {
                    for (int i = 0; i < m_list_allDfield.Count; i++)
                    {
                        DisplayField theField = m_list_allDfield[i];
                        theField.Current_Rect = new RectangleF(theField.Current_Rect.X + theField.Show_Rect.X * zoom + f_czx,
                                                              theField.Current_Rect.Y + theField.Show_Rect.Y * zoom + f_czy,
                                                              theField.Current_Rect.Width + theField.Show_Rect.Width * zoom,
                                                              theField.Current_Rect.Height + theField.Show_Rect.Height * zoom);
                    }
                }
            }

            #region 计算标尺尺寸部份-----放大------
            //计算标尺实际占用像素的宽度
            m_f_ruler_size = m_f_ruler_size + Convert.ToInt32(m_f_old_ruler_size * zoom);
            control_Ruler1.SetValue(m_f_ruler_size, m_pixelSize);
            #endregion
        }

        protected override void OnMouseWheel(MouseEventArgs e)
        {
            if (e.Delta > 0)
            {
                if (m_zoom_record < m_f_zoom_max)
                {
                    //图形缩放计算部份-------放大------------//是放大 一个刻度
                    m_Zoom_Base = const_zoom_increment;
                }
                else return;
            }
            else
            {
                if (m_zoom_record > m_f_zoom_mix)
                {
                    //图形缩放计算部份------缩小--------------//是缩小 一个刻度
                    m_Zoom_Base = -const_zoom_increment;
                }
                else return;
            }
            m_zoom_record = m_zoom_record + m_Zoom_Base;
            //这里对缩放的总记录进行校验
     
            if (m_zoom_record < m_f_zoom_mix)
            {
                m_zoom_record = m_f_zoom_mix;
                return;
            }
          

           

            //传入增减缩放的刻度,进行缩放
            ImageZoomByIncrement(m_Zoom_Base, e.X, e.Y);

            Invalidate();
        }

        protected override void OnMouseDown(MouseEventArgs e)
        {
            if (e.Button == MouseButtons.Left)
            {
                this.Cursor = Cursors.Hand;
           
                if (m_SelectTool.IsSelecting)
                {
                  
                    m_SelectTool.StartPoint = e.Location;
                }
                else
                {
                    bool ifClickOnParticle=false;
                    foreach (BaseObject item in m_list_allDPart)
                    {
                        var dp = (DisplayParticle)item;
                        if (ReportFun.WhetherInRange(dp, e.Location))
                        {
                            dp.IsSelect = !dp.IsSelect;
                            ifClickOnParticle = true;
                            break;
                        }
                    }
                    if (ifClickOnParticle == false)
                    { 
                        foreach (BaseObject item in m_list_allDPart)
                        {
                            var dp = (DisplayParticle)item;
                            if (dp.Rect.Left > -120 && dp.Rect.Right < this.Width + 120 && dp.Rect.Top > -120 && dp.Rect.Bottom < this.Height + 120)
                            {
                                item.IsDragging = true;
                            
                            }
                            item.DraggingPoint = e.Location;


                        }
                        foreach (DisplayField item in m_list_allDfield)
                        {
                            item.IsDragging = true;
                            item.DraggingPoint = e.Location;
                        }
                        m_isDrag = true;
                        m_beforedrag_pointf = e.Location;
                    }

                }
            }
            Invalidate();
        }

        protected override void OnMouseMove(MouseEventArgs e)
        {
            //当前鼠标的位置,用来绘制鼠标线用
            m_mouse_now_point = e.Location;


            if (m_SelectTool.IsSelecting)
            {
                if (e.Button == MouseButtons.Left)
                {
                    if (e.Location.X > m_SelectTool.StartPoint.X && e.Location.Y > m_SelectTool.StartPoint.Y)
                    {
                        //右下拖动
                        m_SelectTool.Rect = new RectangleF(m_SelectTool.StartPoint, new SizeF(e.Location.X - m_SelectTool.StartPoint.X, e.Location.Y - m_SelectTool.StartPoint.Y));
                    }
                    if (e.Location.X < m_SelectTool.StartPoint.X && e.Location.Y < m_SelectTool.StartPoint.Y)
                    {
                        //左上拖动
                        PointF lspointf = new PointF(e.Location.X, e.Location.Y);
                        m_SelectTool.Rect = new RectangleF(lspointf, new SizeF(m_SelectTool.StartPoint.X - e.Location.X, m_SelectTool.StartPoint.Y - e.Location.Y));
                    }
                    if (e.Location.X > m_SelectTool.StartPoint.X && e.Location.Y < m_SelectTool.StartPoint.Y)
                    {
                        //右上，这种画法，需要将左下，右上两点转换成左上，右下
                        PointF left_pointf = new PointF(m_SelectTool.StartPoint.X, e.Location.Y);
                        PointF right_pointf = new PointF(e.Location.X, m_SelectTool.StartPoint.Y);
                        m_SelectTool.Rect = new RectangleF(left_pointf, new SizeF(right_pointf.X - left_pointf.X, right_pointf.Y - left_pointf.Y));

                    }
                    if (e.Location.X < m_SelectTool.StartPoint.X && e.Location.Y > m_SelectTool.StartPoint.Y)
                    {
                        //左下,这种画法，需要将左下，右上两点转换成左上，右下
                        PointF left_pointf = new PointF(e.Location.X, m_SelectTool.StartPoint.Y);
                        PointF right_pointf = new PointF(m_SelectTool.StartPoint.X, e.Location.Y);
                        m_SelectTool.Rect = new RectangleF(left_pointf, new SizeF(right_pointf.X - left_pointf.X, right_pointf.Y - left_pointf.Y));
                    }
                }
            }
            else
            {
                if (m_isDrag)
                {
                    foreach (BaseObject item in m_list_allDPart)
                    {
                        DisplayParticle dp = (DisplayParticle)item;
                        if (true == item.IsDragging)
                        {
                          
                            foreach (DisplaySegment ds in dp.DSegments)
                            {
                                var rec = ds.Rect;
                                rec.X = ds.Rect.X + e.X - item.DraggingPoint.X; //获取到原先点与移动点的增减量，+原先的x坐标，就是新的坐标
                                rec.Y = ds.Rect.Y + e.Y - item.DraggingPoint.Y;
                                ds.Rect = rec;
                                ds.DraggingPoint = e.Location;
                            }
                            item.DraggingPoint = e.Location;

                            //获取矩形的rectangle
                            dp.Rect = dp.GetRectFromDSegment();


                            //重新计算小矩形边框
                            dp.SmallRect = dp.GetSmallRectangleFromRect();
                            if (m_zoom_record >= dp.Zoom_DisPlayThreshold)
                            {
                                dp.SetPaintState(PaintState.NORMALPAINT);
                            }
                            else
                            {
                                dp.SetPaintState(PaintState.CONCISEPAINT);
                            }
                            if (dp.Rect.Left < -120 || dp.Rect.Right > this.Width + 120 || dp.Rect.Top < -120 || dp.Rect.Bottom > this.Height + 120)
                            {
                                dp.SetPaintState(PaintState.NOPAINT);
                            }
                        }
                    }
                    foreach (var item in m_list_allDfield)
                    {
                        if (true == item.IsDragging)
                        {
                            item.Current_Rect = new RectangleF(
                            item.Current_Rect.Left + Convert.ToSingle((e.X - item.DraggingPoint.X)),
                            item.Current_Rect.Top + Convert.ToSingle((e.Y - item.DraggingPoint.Y)),
                            item.Current_Rect.Width,
                            item.Current_Rect.Height);
                            item.DraggingPoint = e.Location;
                        }
                    }
                    //同样重新计算backrectf的坐标
                    m_backRect = new RectangleF(m_backRect.Location.X + e.X - m_beforedrag_pointf.X,
                        m_backRect.Location.Y + e.Y - m_beforedrag_pointf.Y, m_backRect.Width, m_backRect.Height);
                    m_beforedrag_pointf = e.Location;


                }
                else 
                {
                    foreach (BaseObject item in m_list_allDPart)
                    {
                        DisplayParticle dp = (DisplayParticle)item;
                        if (dp.GetPaintState() == PaintState.NORMALPAINT)
                        {
                            if (ReportFun.WhetherInRange(dp, e.Location))
                            {
                                dp.IsMouseOver = true;


                                //显示x-ray能谱图 
                                if (control_XRayTable1.Visible == false)
                                    ShowXRay(dp);

                                //m_sem_mouse_now_point = new Point(dp.SEMPosX, dp.SEMPosY);
                                m_str_mouseshow_left = "颗粒SEM位置:" + dp.SEMPosX.ToString() + ":" + dp.SEMPosY.ToString();
                            }
                            else
                            {

                                dp.IsMouseOver = false;

                                //移动在颗粒外面时，要判断，Operator_ShowXray不为选下显示XRAY时，才对XRay进行隐藏
                                if (dp.Operator_ShowXRay != ParticleShowXray.SELECTANDDISPLAYXRAY)
                                {
                                    //隐藏x-ray能谱图
                                    HideXRay(dp);
                                }
                            }
                        }
                        


                    }
                }
               

              
            }

            #region 向报告程序右下角，传送鼠标颗粒等相关信息
           

            //获取颜色方法1，使用API来获取当前鼠标指向位置的颜色值-----------------------------------------------------
            Color ls_c = GetColorByMousePoint(e.X, e.Y);
            m_str_mouseshow_right = "灰度#" + ls_c.R.ToString();

          

            m_ReportApp.mouseMatter.Text = m_str_mouseshow_right ;
            m_ReportApp.RSGrayVal.Text = m_str_mouseshow_left;

            #endregion

            Invalidate();
        }

        /// <summary>
        /// 获取鼠标所在位置的信息，显示在框架的右下角
        /// </summary>
        /// <param name="mouseshow_left"></param>
        /// <param name="mouseshow_rightb"></param>
        public void GetMouseLowerRightCornerText(out string mouseshow_left, out string mouseshow_rightb)
        {
            mouseshow_left = m_str_mouseshow_left;
            mouseshow_rightb = m_str_mouseshow_right;
        }

        /// <summary>
        /// 鼠标抬起事件
        /// </summary>
        /// <param name="e"></param>
        protected override void OnMouseUp(MouseEventArgs e)
        {
            if (e.Button == MouseButtons.Left)
            {
                this.Cursor = Cursors.Default;
               
                if (m_SelectTool.IsSelecting)
                {
                   
         
                  
                    if (m_SelectTool.Rect.Width > 0 && m_SelectTool.Rect.Height > 0)
                    {
                        GraphicsPath ls_gpath = new GraphicsPath();
                        switch (m_SelectTool.Shape)
                        {
                            case SelectedShape.Rectangle:
                               ls_gpath.AddRectangle(m_SelectTool.Rect);
                                break;
                            case SelectedShape.Ellipse:
                                ls_gpath.AddEllipse(m_SelectTool.Rect);
                                break;
                            default:
                                break;

                        }
                       
                      
                        foreach (DisplayParticle dp in m_list_allDPart)
                        {
                            if (dp.GetPaintState() != PaintState.NOPAINT )
                            {
                                PointF[] lspointf = ls_gpath.PathPoints;
                               
                                    if (true == ReportFun.WhetherInRange(m_SelectTool.Rect, lspointf,new Point((int)dp.Rect.X,(int)dp.Rect.Y)))
                                    {
                                    
                                    dp.IsSelect =!dp.IsSelect ;// set the particle to the opsite selected state
                                    }
                              
                            }
                        }
                    }

                    //这里恢复默认值
                    m_SelectTool.Rect.Width = 0;
                    m_SelectTool.Rect.Height = 0;
                    m_SelectTool.IsSelecting = false;

                }
                else
                {
                    if (m_isDrag)
                    {
    
                        foreach (BaseObject item in m_list_allDPart)
                        {
                            DisplayParticle dp = (DisplayParticle)item;
                         

                                foreach (DisplaySegment ds in dp.DSegments)
                                {
                                    var rec = ds.Rect;
                                    rec.X = ds.Rect.X + e.X - item.DraggingPoint.X; //获取到原先点与移动点的增减量，+原先的x坐标，就是新的坐标
                                    rec.Y = ds.Rect.Y + e.Y - item.DraggingPoint.Y;
                                    ds.Rect = rec;
                                    ds.DraggingPoint = Point.Empty;
                                    ds.IsDragging = false;
                                }
                            item.DraggingPoint = Point.Empty;
                            item.IsDragging = false;
                            //获取矩形的rectangle
                            dp.Rect = dp.GetRectFromDSegment();


                            //重新计算小矩形边框
                            dp.SmallRect = dp.GetSmallRectangleFromRect();
                            if (m_zoom_record >= dp.Zoom_DisPlayThreshold)
                            {
                                dp.SetPaintState(PaintState.NORMALPAINT);
                            }
                            else
                            {
                                dp.SetPaintState(PaintState.CONCISEPAINT);
                            }
                            if (dp.Rect.Left < -120 || dp.Rect.Right > this.Width + 120 || dp.Rect.Top < -120 || dp.Rect.Bottom > this.Height + 120)
                            {
                                dp.SetPaintState(PaintState.NOPAINT);
                            }
                            
                        }


                        m_isDrag = false;

                    }
                   
                }
            }


            if (e.Button == MouseButtons.Right)
            {
           
                
                bool ifClickOnParticle=false;
                bool ifThereIsSelectedParticle = false;

               
                foreach (BaseObject item in m_list_allDPart)
                {
                    if (true == ReportFun.WhetherInRange((DisplayParticle)item, e.Location))
                    {
                        ifClickOnParticle = true;
                        CMenuStrip.Items[(int)RightButtonMenu.Include].Visible = false;
                       
                        CMenuStrip.Items[(int)RightButtonMenu.CopyImage].Visible = false;
                        CMenuStrip.Items[(int)RightButtonMenu.MoveSEMToParticle].Visible = true;
                        CMenuStrip.Items[(int)RightButtonMenu.MoveSEMToParticle].Tag = item;
                    }
                    if (((DisplayParticle)item).IsSelect)
                    {
                        ifThereIsSelectedParticle = true;
                    }
                }
                if (ifClickOnParticle == false)
                {
                    if (ifThereIsSelectedParticle)
                    {

                        CMenuStrip.Items[(int)RightButtonMenu.Include].Visible = true;
                       
                       
                    }
                    else
                    {
                        CMenuStrip.Items[(int)RightButtonMenu.Include].Visible = false;
                       
                       

                    }
                    CMenuStrip.Items[(int)RightButtonMenu.CopyImage].Visible = true;

                    CMenuStrip.Items[(int)RightButtonMenu.MoveSEMToParticle].Visible = false;


                }
                      

            }

            Invalidate();
        }
        #endregion

        #region 鼠标右键菜单
        private void ToolStripMenuItem_id_Click(object sender, EventArgs e)
        {
            //ID
            //DisplayParticle dp = (DisplayParticle)CMenuStrip.Items[0].Tag;
            //MessageBox.Show(dp.guid.ToString());
        }


        //是否显示过小颗菜单
        private void ToolStripMenuItem_ShowSmallParticle_Click(object sender, EventArgs e)
        {
           
        }


        private void ToolStripMenuItem_selected_Click(object sender, EventArgs e)
        {
            List<DisplayParticle> selectedParts = new List<DisplayParticle>();
            List<Particle> Particles = new List<Particle>();
            foreach (var dp in m_list_allDPart)
            {
                if (dp.IsSelect)
                {
                    selectedParts.Add((DisplayParticle)dp);
                    Particle particle = new Particle();
                    particle.FieldId = ((OTSIncAReportGraph.DisplayParticle)dp).FieldId;
                    particle.ParticleId = ((OTSIncAReportGraph.DisplayParticle)dp).ParticleId;
                    Particles.Add(particle);
                }

            }

            m_ReportApp.SetSelectedParticles(Particles);

            SendSelectParticleListToReportFrame(selectedParts);
        }

        /// <summary>
        /// 显示x-ray能谱图
        /// </summary>
        /// <param name="in_dparticle"></param>
        private void ShowXRay(DisplayParticle in_dparticle)
        {
            
            if (delaytimer.Enabled == false)
            {
                m_mouseOver_dparticle = in_dparticle;//将显示xray的dparticle记录给全局变量

                delaytimer.Tick += Delaytimer_Tick;
                delaytimer.Interval = 500;
                delaytimer.Start();

            }
            
           
        }

        private void Delaytimer_Tick(object sender, EventArgs e)
        {
            delaytimer.Enabled = false;
      
          
            //显示xray相关信息
            uint[] Search_xray = new uint[2000];
            uint[] Analysis_xray = new uint[2000];

            //
            int i_xray_id = 0;

            List<Element> list_celementchemistryclr = new List<Element>();

            //获取Xray数据
            ReportFun.GetXrayByParticleTagIDAndFieldID_ForDrawDistrbutionImageAndBSE(m_mouseOver_dparticle.ParticleId, m_mouseOver_dparticle.FieldId, out Search_xray, out Analysis_xray, out i_xray_id, out list_celementchemistryclr);

            //get CElementChemistryClr list
            List<ShowElementInfo> list_showelementinfo = new List<ShowElementInfo>();
            for (int i = 0; i < list_celementchemistryclr.Count; i++)
            {
                ShowElementInfo ls_sei = new ShowElementInfo();
                ls_sei.ElementName = list_celementchemistryclr[i].Name;
                ls_sei.Percentage = list_celementchemistryclr[i].Percentage;
                ls_sei.dKF = Convert.ToDouble(CListPeriodic.GetPeriodicByYsm(CListPeriodic.GetListPeriodic(), ls_sei.ElementName).SX1);
                list_showelementinfo.Add(ls_sei);
            }

            //获取使用标准库的名称
          
            string str_IncALibName = "";
            str_IncALibName = m_mouseOver_dparticle.TypeName;


            //获取数据后，需要对xraytable设置
            control_XRayTable1.Visible = false;
            control_XRayTable1.SetXRayShowLineValue(Search_xray, Analysis_xray, list_showelementinfo);
            //颗粒国标信息
            control_XRayTable1.GBInfoStr = "";
            control_XRayTable1.MaterialName = str_IncALibName;//杂夹物
         
            control_XRayTable1.List_ShowElementInfo = list_showelementinfo;
            control_XRayTable1.Visible = true;



            this.Refresh();
           
        }
        /// <summary>
        /// 隐藏x-ray能谱图
        /// </summary>
        private void HideXRay(DisplayParticle in_dparticle)
        {
            if (m_mouseOver_dparticle == null)
                return;
           if (m_mouseOver_dparticle.guid == in_dparticle.guid)
            {
                //如果是刚才移动过的颗粒的话，那么这里再对xray进行隐藏
                control_XRayTable1.Visible = false;
                delaytimer.Enabled = false;
            }
          
        }


        /// <summary>
        /// 根据传入的鼠标位置，来获取当前鼠标位置上的灰度值
        /// </summary>
        /// <param name="int_x"></param>
        /// <param name="int_y"></param>
        /// <returns></returns>
        private Color GetColorByMousePoint(int int_x, int int_y)
        {
            Graphics g = Graphics.FromHwnd(this.Handle);
            IntPtr hdc = g.GetHdc();

            uint u_color = 0;
            try
            {
                u_color = DrawFunction.GetPixel(hdc, int_x, int_y);
            }
            catch
            { }
            Color ls_c = Color.FromArgb
                (
                (int)(u_color << 24 >> 24),
                (int)(u_color << 16 >> 24),
                (int)(u_color << 8 >> 24)
                );

            return ls_c;
        }
        /// <summary>
        /// 封装，将分布图中的颗粒list传送给报告项目框架中
        /// </summary>
        private void SendSelectParticleListToReportFrame(List<DisplayParticle> selectParts)
        {
            //先获取分布图中，有哪些颗粒已经被选择上了
            foreach (var p in selectParts)
            {
                if (!frmReportApp.selectedParticles.ContainsKey(p.guid))
                {
                    frmReportApp.selectedParticles.Add(p.guid, p);
                }
            
            }
           
        }

        /// <summary>
        /// 设置当前对哪些颗粒进行设置为选择状态
        /// </summary>
        /// <param name="in_list_cotsparticleclr"></param>
        public void SetSelectParticle(List<Particle> particles)
        {
            if (particles == null)
            {
                return;
            }
            if (particles.Count == 0)
            {
                return;
            }

            foreach (DisplayParticle ls_dp in m_list_allDPart)
            {
              
                if (ls_dp.GetPaintState() == PaintState.NORMALPAINT)
                {
                    for (int i = 0; i < particles.Count; i++)
                    {
                        if (particles[i].ParticleId == ls_dp.ParticleId
                               && particles[i].FieldId == ls_dp.FieldId)
                        {
                            ls_dp.IsSelect=true;
                        }
                    }
                }
            }
        }


        private void ToolStripMenuItem_delete_Click(object sender, EventArgs e)
        {
            List<DisplayParticle> selectedParts = new List<DisplayParticle>();
            foreach (var obj in m_list_allDPart)
            {
              var  dp = (DisplayParticle)obj;
                if (dp.IsSelect)
                {
                    dp.IsDeleted = true;
                }
                else 
                {
                    selectedParts.Add(dp);
                }
   
              

            }
            SendSelectParticleListToReportFrame(selectedParts);
           
        }

        //复制图像
        private void toolStripMenuItem_copyimage_Click(object sender, EventArgs e)
        {
            CopyImage();
        }

        private void ToolStripMenuItem_movesempoint_Click(object sender, EventArgs e)
        {
            //移动SEM到指定位置
            if (m_mythread == null)
            {
                return;
            }

            if (m_mythread.ThreadState == System.Threading.ThreadState.Running || m_mythread.ThreadState == System.Threading.ThreadState.WaitSleepJoin)
            {
                return;
            }

            if (m_mythread.ThreadState == System.Threading.ThreadState.Stopped)
            {
                m_mythread = new Thread(new ParameterizedThreadStart(Thread_GO));
            }

            //改为线程调用,先判断线程状态
            m_mythread.Start(new Point(m_sem_mouse_now_point.X, m_sem_mouse_now_point.Y));
        }
        #endregion

        #region 自定义功能函数
        /// <summary>
        /// 复制图像
        /// </summary>
        private void CopyImage()
        {
            int height, width;
            width = this.Width;
            height = this.Height;

            Bitmap image = new Bitmap(width, height);
            this.DrawToBitmap(image, new Rectangle(0, 0, width, height));

            Clipboard.SetImage(image);
        }

        /// <summary>
        /// 移动SEM到指定位置线程函数
        /// </summary>
        private void Thread_GO(object in_obj)
        {
      

                Point sem_point = (Point)in_obj;

                //第一步，连接电镜
                ReportFun.ConnectToSEM();

                Thread.Sleep(500);

                //第二步，移动到指定位置,先读取再设置
                if (ReportFun.m_SEMConnectionState == true)
                {

                    ReportFun.MoveSemToPointXY(sem_point.X, sem_point.Y);

                }

                Thread.Sleep(1500);

                //第三步，断开电镜连接
                ReportFun.DisConnectSEM();

               

        }

        /// <summary>
        /// 按框架传入的底层计算结果，重新对颗粒进行区分显示
        /// </summary>
        /// <param name="in_cgriddataclr"></param>
        public void DrawDistrbutionImageAndBSE_ByQuery(OTSIncAReportApp.OTSSampleReportInfo.ReportCondition in_griddata)
        {
            FilterParticleByOtherCondition(in_griddata);
            Invalidate();
            this.Refresh();
        }

        /// <summary>
        /// 对分布图进行宽度匹配操作
        /// </summary>
        public void WidthMatch()
        {
            if (this.Width != m_backRect.Width)
            {
                float f_cz = 0;//进行调整的差值
                f_cz = -((m_backRect.Width - this.Width) / m_old_backRect.Width);

                m_zoom_record = m_zoom_record + f_cz;//更新上缩放值，与下面处理缩放对应上
                ImageZoomByIncrement(f_cz, 0, 0);
            }

            MoveImageToPoint(new PointF(0, 0));

        }

        /// <summary>
        /// 对分布图进行高度匹配操作
        /// </summary>
        public void HeightMatch()
        {
            if (this.Height != m_backRect.Height)
            {
                float f_cz = 0;//进行调整的差值
                f_cz = -((m_backRect.Height - this.Height) / m_old_backRect.Height);

                m_zoom_record = m_zoom_record + f_cz;//更新上缩放值，与下面处理缩放对应上
                ImageZoomByIncrement(f_cz, 0, 0);
            }

            //移动到，this.width - backrectf.width /2
            int ls_x = (int)(this.Width - m_backRect.Width) / 2;
            MoveImageToPoint(new PointF(ls_x, 0));
        }

        /// <summary>
        /// 对分布图进行全图匹配操作
        /// </summary>
        public void FullGraphMatch()
        {
  
                //全图匹配，首先要判断出来是按宽度来计算缩放，还是按高度来计算缩放
                double thiswidth = this.Width;
            double thisheight = this.Height;
            double imagewidth = m_backRect.Width;
            double imageheight = m_backRect.Height;

            //如果宽已相等rect在thisheight范围内，是宽度匹配已经达到目的,或是高已相等rect在thiswidth范围内，是高度匹配已经达到目的
            if ((thiswidth == imagewidth && thisheight > imagewidth) || (thisheight == imageheight && thiswidth > imagewidth))
            {
                //已经达到目的不操作,返回
                return;
            }

            //判断当前是否宽度匹配未达到全图匹配效果
            if (thiswidth == imagewidth && thisheight < imageheight)
            {
                //说明目前已经达到了宽度匹配，但是未能显示完全整图需要高度匹配
                HeightMatch();
                return;

            }

            //判断当前是否高度匹配未达到全图匹配效果
            if (thisheight == imageheight && thiswidth < imagewidth)
            {
                //说明目前已经达到了高度匹配，但是未能显示完全的整图需要宽度匹配
                WidthMatch();
                return;
            }

            ls_d_cz_width = Math.Abs(thiswidth / imagewidth);
            ls_d_cz_height = Math.Abs(thisheight / imageheight);

            //应该是看谁差的倍数大就按谁的进行调整，而不只能看高宽的差值
            if ((1 - ls_d_cz_width) > (1 - ls_d_cz_height))
            {
                //宽差大，就调用WidthMate
                WidthMatch();
            }
            else
            {
                //高差大，则调用HightMate
                HeightMatch();
            }
            m_f_zoom_mix = m_zoom_record;
        }

        /// <summary>
        /// 将整个图像的位置移动到指定的位置上
        /// </summary>
        private void MoveImageToPoint(PointF in_pointf)
        {
            //先计算，当前所在的位置，和需要移动的位置之间的差
            //想复杂了，其实就是当前backrectf的x,y与in_pointf的差就完了呗
            PointF offex_p = new PointF(m_backRect.X - in_pointf.X, m_backRect.Y - in_pointf.Y);

            for (int i = 0; i < m_list_allDPart.Count; i++)
            {
                DisplayParticle dp = (DisplayParticle)m_list_allDPart[i];
                for (int k = 0; k < dp.DSegments.Count; k++)
                {
                    dp.DSegments[k].Rect = new RectangleF(
                        dp.DSegments[k].Rect.X - offex_p.X,
                        dp.DSegments[k].Rect.Y - offex_p.Y,
                        dp.DSegments[k].Rect.Width,
                        dp.DSegments[k].Rect.Height);
                }

                //获取矩形的rectangle
                dp.Rect = dp.GetRectFromDSegment();

                //通过line获取路径边缘
                dp.GPath = dp.GetRegionFromDSegments();

                //重新计算小矩形边框
                dp.SmallRect = dp.GetSmallRectangleFromRect();
                if (dp.Rect.Left < -120 || dp.Rect.Right > this.Width + 120 || dp.Rect.Top < -120 || dp.Rect.Bottom > this.Height + 120)
                {
                    dp.SetPaintState(PaintState.NOPAINT);
                }
            }
            //同样重新计算backrectf的坐标
            m_backRect = new RectangleF(m_backRect.X - offex_p.X, m_backRect.Y - offex_p.Y,
                m_backRect.Width, m_backRect.Height);


            for (int i =0;i< m_list_allDfield.Count;i++)
            {
                RectangleF dField = m_list_allDfield[i].Current_Rect;
                dField.X = dField.X-offex_p.X;
                dField.Y = dField.Y - offex_p.Y;
                m_list_allDfield[i].Current_Rect = dField;
            }


            Invalidate();
        }

    


 

        /// <summary>
        /// 是否显示边框格线,自动切换显示与不显示
        /// </summary>
        /// <param name="b_show"></param>
        public void ShowGridLine()
        {
            m_is_showgrid = !m_is_showgrid;
        }

        /// <summary>
        /// 是否显示标尺控件
        /// </summary>
        /// <param name="b_show"></param>
        public void ShowRulerControl()
        {
            control_Ruler1.Visible = !control_Ruler1.Visible;
        }

        /// <summary>
        /// 是否显示边框格线,带参重载
        /// </summary>
        /// <param name="b_show"></param>
        public void ShowGridLine(bool b_show)
        {
            m_is_showgrid = b_show;
        }

        /// <summary>
        /// 是否显示标尺控件,带参重载
        /// </summary>
        /// <param name="b_show"></param>
        public void ShowRulerControl(bool b_show)
        {
            control_Ruler1.Visible = b_show;
        }

  

        /// <summary>
        /// 是否进行矩形多选操作
        /// </summary>
        public void MultiSelect_Rectangle()
        {
 
            m_SelectTool.IsSelecting = true;
            m_SelectTool.Shape = SelectedShape.Rectangle;
            m_SelectTool.Rect = new RectangleF();
            m_SelectTool.Rect.Width = 0;
            m_SelectTool.Rect.Height = 0;
        }

        /// <summary>
        /// 是否进行圆形多选操作
        /// </summary>
        public void MultiSelect_Ellipse()
        {
 
            m_SelectTool.IsSelecting = true;
            m_SelectTool.Shape = SelectedShape.Ellipse;
            m_SelectTool.Rect = new RectangleF();
            m_SelectTool.Rect.Width = 0;
            m_SelectTool.Rect.Height = 0;
        }

        /// <summary>
        /// 对选择的多边形进行反选操作
        /// </summary>
        public void ReverseSelection()
        {
            foreach (DisplayParticle dp in m_list_allDPart)
            {
            
                if (dp.IsSelect)
                {
                    dp.IsSelect = false;
                }
                else
                {
                    dp.IsSelect = true;
                }
            }

            //将排列图选择的颗粒传送给报告框架中
            //SendSelectParticleListToReportFrame();

            this.Invalidate();
        }

        /// <summary>
        /// 取消所有的颗粒的选择状态
        /// </summary>
        public void DeselectAllParticle()
        {
            foreach (DisplayParticle dp in m_list_allDPart)
            {
               
                    dp.IsSelect=false;
                
            }

          

            this.Invalidate();
        }


        

        /// <summary>
        /// 将整个图像拷贝到内存中
        /// </summary>
        public void CopyToBitmap()
        {
            Bitmap bp = new Bitmap(this.Size.Width, this.Size.Height);
            this.DrawToBitmap(bp, new Rectangle(0, 0, this.Size.Width, this.Size.Height));

            Clipboard.SetImage(bp);
        }

        /// <summary>
        /// 设置显示BSE原图，还是显示分布图带有标准库的
        /// </summary>
       
        public void ShowMode(IMAGE_TYPE a_type)
        {
            if (a_type == IMAGE_TYPE.BSE)
            {
                OriginalBackground = false;
                //bse图时，显示背景图为白色
                m_backrangecolor = Color.White;
                foreach (DisplayParticle ls_dp in m_list_allDPart)
                {
                    
                    foreach (DisplaySegment ls_ds in ls_dp.DSegments)
                    {
                        ls_ds.ShowMode = SegmentShowMode.DRAWPOINT;
                    }
                }
                FullGraphMatch();
            }
            else if (a_type == IMAGE_TYPE.CLASSIFIED)
            {
                m_backrangecolor = Color.Gainsboro;
                OriginalBackground = false;
                foreach (DisplayParticle ls_dp in m_list_allDPart)
                {
                    //ls_dp.DisplayState = DisplayState.DISPLAY;
                    foreach (DisplaySegment ls_ds in ls_dp.DSegments)
                    {
                        ls_ds.ShowMode = SegmentShowMode.DRAWLINE;
                    }
                }
                FullGraphMatch();
            }
            else if (a_type== IMAGE_TYPE.ORIGINAl)
            {
                m_backrangecolor = Color.Gainsboro;
                OriginalBackground = true;
                foreach (DisplayParticle ls_dp in m_list_allDPart)
                {
                    ls_dp.SetDisplayState(DisplayState.NODISPLAY);
                }
                FullGraphMatch();
            }
            else if(a_type== IMAGE_TYPE.ORIGINALCLASSIFIED)
            {
                m_backrangecolor = Color.Gainsboro;
                OriginalBackground = true;
                foreach (DisplayParticle ls_dp in m_list_allDPart)
                {
                    //ls_dp.DisplayState = DisplayState.DISPLAY;
                    foreach (DisplaySegment ls_ds in ls_dp.DSegments)
                    {
                        ls_ds.ShowMode = SegmentShowMode.DRAWLINE;
                    }
                }
                FullGraphMatch();
            }

        
            this.Invalidate();
        }

        /// <summary>
        /// 根据传入的颗粒状态，来获取所有该颗粒状态下的数据，用来测试统计使用
        /// </summary>
        /// <param name="str_particlestate"></param>
        /// <returns></returns>
        public int GetParticleNumberByState(PaintState in_ParticleState)
        {
            int icount = 0;
            foreach (DisplayParticle ls_dp in m_list_allDPart)
            {
                if (ls_dp.GetPaintState() == in_ParticleState)
                {
                    icount++;
                }
            }

            return icount;
        }

        /// <summary>
        /// 获取所有原图
        /// </summary>
        /// <param name="args"></param>
        /// <returns></returns>
        private void GetPic(PaintEventArgs args)
        {

                    foreach (var f in m_list_allDfield)
                    {

                        var curfldrec = f.Current_Rect;
                        if (curfldrec.Left > -1000 && curfldrec.Right <this.Width + 1000 && curfldrec.Top > -1000 && curfldrec.Bottom < this.Height + 1000)
                        {


                     
                            args.Graphics.DrawImage(f.OriginalImage, f.Current_Rect.X, f.Current_Rect.Y, f.Current_Rect.Width, f.Current_Rect.Height);
                        }
                    }
          
        }

        
        #endregion

        #region Debug下执行的辅助测试代码
        private void Control_DrawDistrbutionImageAndBSE_MouseDoubleClick(object sender, MouseEventArgs e)
        {
#if DEBUG
            Screen[] screens = Screen.AllScreens;
            string ls_str = "";
            for (int i = 0; i < screens.Count(); i++)
            {
                ls_str = ls_str + "显示器" + (i + 1).ToString() + "  名称:" + screens[i].DeviceName + Environment.NewLine +
                "显示器" + (i + 1).ToString() + "  是否主要显示器:" + screens[i].Primary + Environment.NewLine +
                "显示器" + (i + 1).ToString() + "  WorkingArea:" + screens[i].WorkingArea + Environment.NewLine +
                "显示器" + (i + 1).ToString() + "  Bounds:" + screens[i].Bounds + Environment.NewLine +
                "显示器" + (i + 1).ToString() + "  色深:" + screens[i].BitsPerPixel + Environment.NewLine;
            }

            MessageBox.Show("------------------该段代码主要用来测试程序---------------------" + Environment.NewLine +
                //"当前窗体X:" + this.ParentForm.Location.X.ToString() + "   Y:" + this.ParentForm.Location.Y.ToString() + Environment.NewLine +
                "显示器数量" + Screen.AllScreens.Count().ToString() + Environment.NewLine +
                ls_str +
                "DESKTOP.Width:" + MyPrimaryScreen.DESKTOP.Width + "   DESKTOP.Height:" + MyPrimaryScreen.DESKTOP.Height + Environment.NewLine +
                "DpiX:" + MyPrimaryScreen.DpiX + "   DpiY:" + MyPrimaryScreen.DpiY + Environment.NewLine +
                "ScaleX:" + MyPrimaryScreen.ScaleX + "   ScaleY:" + MyPrimaryScreen.ScaleY + Environment.NewLine +
                "WorkingArea.Width:" + MyPrimaryScreen.WorkingArea.Width + "   WorkingArea.Height:" + MyPrimaryScreen.WorkingArea.Height + Environment.NewLine +
                "this.Width:" + this.Width + "   this.Height:" + this.Height + Environment.NewLine +
                "单像素比:" + m_pixelSize.ToString() + Environment.NewLine +
                "缩放倍数:" + m_zoom_record.ToString() + Environment.NewLine +
                "屏幕像素backrectf  x:" + m_backRect.X.ToString() + "  y:" + m_backRect.Y.ToString() + "  width:" + m_backRect.Width.ToString() + "  height:" + m_backRect.Height.ToString() + Environment.NewLine +
                "屏幕像素oldbackrectf  x:" + m_old_backRect.X.ToString() + "  y:" + m_old_backRect.Y.ToString() + "  width:" + m_old_backRect.Width.ToString() + "  height:" + m_old_backRect.Height.ToString() + Environment.NewLine +
                "物理像素back_wl_rectf  x:" + m_back_wl_rectf.X.ToString() + "  y:" + m_back_wl_rectf.Y.ToString() + "  width:" + m_back_wl_rectf.Width.ToString() + "  height:" + m_back_wl_rectf.Height.ToString() + Environment.NewLine +
                //"单个Field视域屏幕像素宽:" + m_OneField_Screen_BackRectf.Width.ToString() + " 高:" + m_OneField_Screen_BackRectf.Height.ToString() + Environment.NewLine +
                //"单个OTS视域屏幕像素宽:" + m_OneField_OTS_Rect.Width.ToString() + " 高:" + m_OneField_OTS_Rect.Height.ToString() + Environment.NewLine +
                "屏幕像素backrectf  x:" + m_backRect.X.ToString() + "  y:" + m_backRect.Y.ToString() + "  width:" + m_backRect.Width.ToString() + "  height:" + m_backRect.Height.ToString() + Environment.NewLine +
                "包含Field数量:" + ReportFun.m_field_count.ToString() + " Particle数量:" + ReportFun.m_particle_count.ToString() + Environment.NewLine +
                "正常显示Paticle数量:" + GetParticleNumberByState(PaintState.NORMALPAINT).ToString() + " 不显示Particel数量:" + GetParticleNumberByState(PaintState.NOPAINT).ToString() + Environment.NewLine +
                //"删除Particle数量:" + GetParticleNumberByState("删除").ToString() + " 选中Particle数量:" + GetParticleNumberByState("选择").ToString() + Environment.NewLine +
                "加载底层数据用时:" + ReportFun.m_time_str + Environment.NewLine +
                "组建并计算图像用时:" + ReportFun.m_time_str2 + Environment.NewLine +
                "---------------------------END----------------------------------"
                );
#endif
        }
        #endregion



    }
}