OTS/OTSIncAMeasureApp/5-OTSMeasureStatuImageFun/OTSMeasureStatusWindow.cs

using OTS.WinFormsUI.Docking;
using OTSCLRINTERFACE;
using OTSDataType;
using OTSIncAGraph.Controls;
using OTSMeasureApp._0_OTSModel.OTSDataType;
using OTSModelSharp;
using OTSModelSharp.ServiceCenter;
using OTSPeriodicTable;
using System;
using System.Collections;
using System.Collections.Generic;
using System.Data;
using System.Drawing;
using System.Drawing.Imaging;
using System.IO;
using System.Reflection;
using System.Windows.Forms;
//using OTSMeasureApp._0_OTSModel.Measure.ParamData;

namespace OTSMeasureApp
{
    public enum idLine
    {
        //曲线
        GrayLine = 0,
        //灰度图
        GrayImage = 1
    }
    public enum MeasureStateMenuType
    {
        //获取BSE图
        ReadBSEPic = 0,
        //设置可视化灰度
        SetVisualGray = 1,
        //显示BSE灰度曲线图
        SetVisualGrayForSpecialGray = 2,
        grayToolStripMenuItem = 3,
        //切换至BSE图
        ChangeDiffImageShow = 4,
        //BSE去背景图
        DelBSEBG = 5,
        ColoredBSENoBG = 6,
        //显示BSE去背景灰度曲线图
        SampleHoleBSEImage = 7,
        //线扫描曲线
        MenuItemLineScam = 8,
        //单点采集Xray与元素信息
        PointScanElementMenuItem = 9,
        //导出采集信息报告
        ExportReport = 10
    }
    public partial class OTSMeasureStatusWindow : DockContent
    {

        #region 全部变量
        public OTSIncAMeasureAppForm m_MeasureAppForm;


        static int m_iWidth = 0;
        static int m_iHeight = 0;

        //获取BSE图时最初的位置
        Point m_GetBSEImageInitPoint = new Point();
        // 调试图图片数据
        public byte[] originalBseData;
        //去背景图
        private byte[] removeBGBseData;

        private Bitmap coloredParticleImage;

        //灰度图数据
        public double[] dGrayLevelData;
        //灰度峰值
        private double dGrayLevelMax;
        //去背景灰度图数据
        private double[] dGrayAbandonLevelData;
        //去背景灰度峰值
        private double dGrayAbandonLevelMax;

        public string FileName;

        //原图Y轴
        int YSize = 0;

        //int drawflag = 0;

        private int height = 0;
        private int width = 0;
        //画布大小
        private Bitmap bitmap;


        //要画曲线的点y坐标值,x值为10s采集一次数据
        private float[] curvebuf = new float[] { 20.0f, 30.0f, 40.0f, 35.4f, 21.6f, 32.8f, 5.2f, 9.9f, 30f, 35.3f, 25.3f, 21.2f, 30.2f, 22.8f, 40.5f, 5.6f, 20.6f };
        //记录鼠标在BSE移动时 图像的位置
        double m_MouseMoveImageX = -1;
        double m_MouseMoveImageY = -1;


        //绘制采集点对象
        public static List<CRectangleGDIObject> m_ElementPointGDIObjects;
        Point m_mouseCurrentPoint = new Point();
        //鼠标缩放倍数
        float m_CurrentMultiple = 0;
        float m_Multiple = 0.2f;
        int m_MaxMultipleRange = 4;
        //单击采集的鼠标位置
        double dMouseImgX = 0;
        double dMouseImgY = 0;
        NLog.Logger log;
        //国际化
        OTSCommon.Language lan;
        Hashtable table;

        #endregion
        #region 在右下角状态栏中显示鼠标当前位置所需要的参数
        double dPositionX = 0;
        double dPositionY = 0;

        int FieldWitdh = 0;
        double FieldHeight = 0;


        #endregion
        public enum ImageType
        {
            //BSE图
            BSEImage = 0,
            //去背景图
            RemoveBGImage = 1,
            //显示灰度曲线图
            GrayLevelChart = 2,
            //线扫描曲线
            GrayLevelLine = 3,
            //显示去背景BSE图灰度曲线
            GrayAbandonLevelChart = 4,
            //
            ColorParticleImage = 5
        }
        //图bfResult
        public static bool bfResult = false;
        //当前是否显示线扫描
        public static bool IsShowGrayLevelLine = false;
        //当前默认值
        ImageType m_imagetype = ImageType.BSEImage;
        ImageType m_IsShowImageType = ImageType.BSEImage;


        public OTSMeasureStatusWindow(OTSIncAMeasureAppForm MeasureApp)
        {

            InitializeComponent();
            m_MeasureAppForm = MeasureApp;

            m_ElementPointGDIObjects = new List<CRectangleGDIObject>();

            //进入时首先对XRayTable进行隐藏
            panelXray.Visible = false;
            //国际化
            lan = new OTSCommon.Language(this);
            table = lan.GetNameTable(this.Name);
        }
        /// <summary>
        /// 在控件中显示BSE图像
        /// </summary>
        /// <param name="m_iWidth"></param>
        /// <param name="m_iHeigh"></param>
        /// <param name="bBseData"></param>
        public void ShowImage(int m_iWidth, int m_iHeigh, byte[] bBseData)
        {
            try
            {
                Bitmap bitmap = CImageHandler.ToGrayBitmap(bBseData, m_iWidth, m_iHeigh);
                ShowBitmap(m_iWidth, m_iHeigh, bitmap);
            }
            catch (Exception e)
            {
                NLog.LogManager.GetCurrentClassLogger().Error(e.Message);
            }


        }
        public void ShowBitmap(int m_iWidth, int m_iHeigh, Bitmap coloredImage)
        {


            picBox.Image = coloredImage;
            //设置Pictrue显示位置
            picBox.Height = this.RestoreBounds.Height;
            picBox.Width = this.RestoreBounds.Height * 4 / 3;
            //获取黄线坐标位置
            Rectangle rectangle = GetPictureBoxZoomSize(picBox);
            m_GetBSEImageInitPoint = rectangle.Location;
            pointStart.X = rectangle.X;
            pointEnd.X = rectangle.X + rectangle.Width;
            pointStart.Y = rectangle.Y + (rectangle.Height) / 2;
            pointEnd.Y = rectangle.Y + (rectangle.Height) / 2;
            picBox.Left = 0;
            picBox.Top = 0;
            picBox.Show();

        }

        /// <summary>
        /// 在控件中显示图像
        /// </summary>
        /// <param name="m_iWidth"></param>
        /// <param name="m_iHeigh"></param>
        /// <param name="bBseData"></param>
        public Image ShowImageStatus(int m_iWidth, int m_iHeigh, byte[] bBseData)
        {

            return CImageHandler.ToGrayBitmap(bBseData, m_iWidth, m_iHeigh);

        }
        //显示扫描曲线图方法
        #region 显示扫描曲线图方法        
        private void DrawCurve(byte[] buf, PaintEventArgs e)
        {

            //创建位图
            Rectangle rectangle = GetPictureBoxZoomSize(picBox);
            double rate = (double)rectangle.Height / (double)picBox.Image.Height;
            width = rectangle.Width;
            height = rectangle.Height;
            bitmap = new Bitmap(width, height);

            Pen mypenYellow = new Pen(Color.Yellow, 0.001f);//点颜色


            int len = buf.Length;
            PointF[] CurvePointF = new PointF[len];//坐标点
            float pointX = 0;
            float pointY = 0;
            for (int i = 0; i < buf.Length; i++)
            {
                pointX = (picBox.Width - rectangle.Width) / 2 + Convert.ToSingle(i * rate);
                float imagei = (int)GrayLevel.Max - Convert.ToInt32(buf[i]);
                float imagerate = (Convert.ToSingle(Convert.ToDouble(rectangle.Height) / 510));
                pointY = imagei * imagerate + (rectangle.Height) / 4 + rectangle.Top;
                if (pointY > ((rectangle.Height) * 3 / 4))
                {
                    float ii = pointY;

                }
                CurvePointF[i] = new PointF(pointX, pointY);
            }
            float Tension = 0.001f;
            e.Graphics.DrawCurve(mypenYellow, CurvePointF, Tension);//画曲线



        }
        #endregion

        //处理获取调试图菜单事件
        #region 处理获取调试图菜单事件
        private void AcquireBSEImage_Click(object sender, EventArgs e)
        {

            if (m_ElementPointGDIObjects != null)
            {
                m_ElementPointGDIObjects.Clear();
            }
            //设置右键菜单中的项 是否可编辑
            SetContextMenuEnabled(true);
            AcquireBSEImage();



            DelElementPointGDIObjects();
            panelXray.Visible = false;
            m_CurrentMultiple = 0;

        }
        /// <summary>
        /// 获取BSE图方法
        /// </summary>
        private void AcquireBSEImage()
        {

            //获取电镜中图像大小
            string str = m_MeasureAppForm.m_ProjParam.GetBSEImageResolutionStr();// 举例：1024X768 
            string[] sArray = str.Split('X');
            if (sArray[0] != "" && sArray[1] != "")
            {
                m_iWidth = Convert.ToInt32(sArray[0]);
                m_iHeight = Convert.ToInt32(sArray[1]);
            }
            //建立图像数据
            originalBseData = new byte[m_iWidth * m_iHeight];
            //获取图像数据
            int nDwellTime = 4;
            try
            {
                int level = (int)m_MeasureAppForm.m_ProjParam.GetResultData().GetWorkingSample().GetMsrParams().GetImageScanParam().GetScanImageSpeed();
                switch (level)
                {
                    case 0:
                        nDwellTime = 2;
                        break;
                    case 1:
                        nDwellTime = 4;
                        break;
                    case 2:
                        nDwellTime = 8;
                        break;
                }
            }
            catch (Exception)
            {
                nDwellTime = 8;
            }


            bool rst = GetScanImage(m_iWidth, m_iHeight, nDwellTime, ref originalBseData);
            //取图不成功就返回
            if (rst)
            {
                bfResult = true;
            }
            if (!rst)
            {
                if (contextMenuStrip1.Items[(int)MeasureStateMenuType.ChangeDiffImageShow].Enabled == true)
                {
                    contextMenuStrip1.Items[(int)MeasureStateMenuType.ChangeDiffImageShow].Enabled = false;
                }
                //显示单点扫描元素信息菜单
                contextMenuStrip1.Items[(int)MeasureStateMenuType.PointScanElementMenuItem].Enabled = false;
                picBox.Hide();
                return;
            }
            else
            {
                //显示单点扫描元素信息菜单
                contextMenuStrip1.Items[(int)MeasureStateMenuType.PointScanElementMenuItem].Enabled = true;
            }
            //获取灰度图数据
            dGrayLevelData = new double[(int)GrayLevel.Max];
            dGrayLevelData = GetGaryData(originalBseData, dGrayLevelData);

            //计算灰度最大值
            dGrayLevelMax = dGrayLevelData[0];
            for (int i = 1; i < (int)GrayLevel.Max; i++)
            {
                dGrayLevelMax = Math.Max(dGrayLevelMax, dGrayLevelData[i]);
            }
            SetClickMenuBSEImg();
            //更新当前的图
            //UpdateImageOrChart(m_imagetype);

            ShowImage(m_iWidth, m_iHeight, originalBseData);

            IsShowGrayLevelLine = false;
            //获取默认Y轴


            myChart.Visible = false;

            //图像加载后的显示位置
            m_CurrentMultiple = 0;


            picBox.Height = this.RestoreBounds.Height;

            picBox.Left = 0;
            picBox.Top = 0;

        }
        public double[] GetGaryData(byte[] Imagedata, double[] GrayLevelData)
        {

            //获得下标每一点的灰度值，并在数组里加一
            for (int i = 0; i < Imagedata.Length; i++)
            {
                byte graylevel = Imagedata[i];
                if (graylevel > 0 && graylevel < 255)
                {
                    GrayLevelData[graylevel] += 1;
                }
            }
            return GrayLevelData;

        }
        public bool GetScanImage(int iWidth, int iHeight, int iDwellTime, ref byte[] bImageData)
        {

            //电镜设置对象
            IScanController cfun = ScanController.GetScanController();
            ISemController sem = SemController.GetSEMController();

            //int GetImgCount = 0;
            try
            {
                //连接电镜
                bool IsConnec = cfun.Init();
                if (!IsConnec)
                {
                    string strErrorInfo = "(OTSBSEImageFun.GetScanImage) cfun.ConncetSem() = false  Failed";
                    log.Error(strErrorInfo);
                    return false;
                }


                cfun.SetImageSize(iWidth, iHeight);
                cfun.SetDwellTime(iDwellTime);

                var bse = cfun.AcquireBSEImage();
                bImageData = bse.GetImageDataPtr();

                sem.SetScanExternal(false);

            }
            catch (Exception ex)
            {

                log.Error(ex.Message.ToString());
                return false;

            }
            return true;

        }
        #endregion

        #region 设置点击BSE菜单
        public void SetClickMenuBSEImg()
        {
            //用于线扫描曲线
            m_IsShowImageType = ImageType.BSEImage;
            m_imagetype = ImageType.BSEImage;
            picBox.Show();


        }
        #endregion


        //显示去背景图 = AUTO
        #region 显示去背景图
        private void ShowRemoveBGImage_Click(object sender, EventArgs e)
        {
            //设置右键菜单中的项 是否可编辑
            SetContextMenuEnabled(true);
            ShowRemoveBGImage();
            m_CurrentMultiple = 0;
            panelXray.Visible = false;
        }
        protected void ShowRemoveBGImage()
        {

            //获取电镜中图像大小
            string str = m_MeasureAppForm.m_ProjParam.GetBSEImageResolutionStr();
            string[] sArray = str.Split('X');
            if (sArray[0] != "" && sArray[1] != "")
            {
                m_iWidth = Convert.ToInt32(sArray[0]);
                m_iHeight = Convert.ToInt32(sArray[1]);
            }
            //获取图像数据
            COTSSample WSample = m_MeasureAppForm.m_ProjRstData.GetWorkingSample();
            double pixelSize = WSample.CalculatePixelSize();

            var imageProcessParam = WSample.GetMsrParams().GetImageProcessParam();

            var imageHandle = new CImageHandler();

            bfResult = imageHandle.GetBSEImage(imageProcessParam, pixelSize, originalBseData, m_iWidth, m_iHeight, ref removeBGBseData);
            m_IsShowImageType = ImageType.RemoveBGImage;

            //获取去背景灰度图数据
            dGrayAbandonLevelData = new double[(int)GrayLevel.Max];
            dGrayAbandonLevelData = GetGrayAbandonData(removeBGBseData, dGrayAbandonLevelData);

            //计算灰度去背景最大值
            dGrayAbandonLevelMax = dGrayAbandonLevelData[0];
            for (int i = 1; i < (int)GrayLevel.Max; i++)
            {
                dGrayAbandonLevelMax = Math.Max(dGrayAbandonLevelMax, dGrayAbandonLevelData[i]);
            }



            //取图不成功就返回
            if (!bfResult) { return; }






            ShowImage(m_iWidth, m_iHeight, removeBGBseData);

            IsShowGrayLevelLine = false;

            myChart.Visible = false;

            //切换显示至BSE图
            contextMenuStrip1.Items[(int)MeasureStateMenuType.ChangeDiffImageShow].Enabled = true;


        }
        protected void ShowColoredRemoveBGImage()
        {

            //获取电镜中图像大小
            string str = m_MeasureAppForm.m_ProjParam.GetBSEImageResolutionStr();
            string[] sArray = str.Split('X');
            if (sArray[0] != "" && sArray[1] != "")
            {
                m_iWidth = Convert.ToInt32(sArray[0]);
                m_iHeight = Convert.ToInt32(sArray[1]);
            }
            //获取图像数据
            COTSSample WSample = m_MeasureAppForm.m_ProjRstData.GetWorkingSample();
            double pixelSize = WSample.CalculatePixelSize();

            var imageProcessParam = WSample.GetMsrParams().GetImageProcessParam();

            var imageHandle = new CImageHandler();

            coloredParticleImage = new Bitmap(m_iWidth, m_iHeight);
            CBSEImgClr pImgNoBG = new CBSEImgClr(new Rectangle(0, 0, m_iWidth, m_iHeight));
            bfResult = imageHandle.GetColoredImage(imageProcessParam, pixelSize, originalBseData, m_iWidth, m_iHeight, ref pImgNoBG, ref coloredParticleImage);

            removeBGBseData = pImgNoBG.GetImageDataPtr();

            //获取去背景灰度图数据
            dGrayAbandonLevelData = new double[(int)GrayLevel.Max];
            dGrayAbandonLevelData = GetGrayAbandonData(removeBGBseData, dGrayAbandonLevelData);

            //计算灰度去背景最大值
            dGrayAbandonLevelMax = dGrayAbandonLevelData[0];
            for (int i = 1; i < (int)GrayLevel.Max; i++)
            {
                dGrayAbandonLevelMax = Math.Max(dGrayAbandonLevelMax, dGrayAbandonLevelData[i]);
            }



            //取图不成功就返回
            if (!bfResult) { return; }



            ShowBitmap(m_iWidth, m_iHeight, coloredParticleImage);

            IsShowGrayLevelLine = false;


            myChart.Visible = false;
            picBox.Show();
            //切换显示至BSE图
            contextMenuStrip1.Items[(int)MeasureStateMenuType.ChangeDiffImageShow].Enabled = true;
            if (OTSCommon.Language.ReadDefaultLanguage() == "ZH")
            {
                contextMenuStrip1.Items[(int)MeasureStateMenuType.ChangeDiffImageShow].Text = "切换显示至BSE图";
            }
            else
            {
                contextMenuStrip1.Items[(int)MeasureStateMenuType.ChangeDiffImageShow].Text = "SwitchDisplayToBSEDiagram";
            }

        }

        #endregion
        //显示灰度曲线
        #region 显示灰度曲线
        private void ShowGrayLevelImage_Click(object sender, EventArgs e)
        {
            //设置右键菜单中的项 是否可编辑
            SetContextMenuEnabled(false);
            ShowGrayLevelImage();
            myChart.Visible = true;
            panelXray.Visible = false;
            IsShowGrayLevelLine = false;
        }
        protected void ShowGrayLevelImage()
        {

            m_imagetype = ImageType.GrayLevelChart;

            picBox.Hide();

            //切换显示至BSE图
            contextMenuStrip1.Items[(int)MeasureStateMenuType.ChangeDiffImageShow].Enabled = true;
            contextMenuStrip1.Items[(int)MeasureStateMenuType.ChangeDiffImageShow].Enabled = true;
            if (OTSCommon.Language.ReadDefaultLanguage() == "ZH")
            {
                contextMenuStrip1.Items[(int)MeasureStateMenuType.ChangeDiffImageShow].Text = "切换显示至BSE图";
            }
            else
            {
                contextMenuStrip1.Items[(int)MeasureStateMenuType.ChangeDiffImageShow].Text = "SwitchDisplayToBSEDiagram";
            }
            //UpdateImageOrChart(m_imagetype);

            int[] XData = new int[(int)GrayLevel.Max];
            for (int i = 0; i < (int)GrayLevel.Max; i++)
            {
                XData[i] = i + 1;
            }
            int[] YData = new int[dGrayLevelData.Length];
            for (int i = 0; i < dGrayLevelData.Length; i++)
            {
                YData[i] = (int)dGrayLevelData[i];
            }
            chartData(XData, YData);



        }

        #endregion
        //显示线扫描曲线
        #region  显示线扫描曲线
        private void ShowGrayLevelLine_Click(object sender, EventArgs e)
        {
            if (MenuItemLineScan.Checked)
            {
                IsShowGrayLevelLine = true;

            }
            else
            {
                IsShowGrayLevelLine = false;
            }

            panelXray.Visible = false;

            picBox.Refresh();

        }

        #endregion

        #region  扫描线轴X
        public Rectangle GetPictureBoxZoomSize(PictureBox p_PictureBox)
        {
            if (p_PictureBox != null)
            {
                PropertyInfo _ImageRectanglePropert = p_PictureBox.GetType().GetProperty("ImageRectangle", BindingFlags.Instance | BindingFlags.NonPublic);

                return (Rectangle)_ImageRectanglePropert.GetValue(p_PictureBox, null);
            }
            return new Rectangle(0, 0, 0, 0);
        }
        #endregion

        private void OTSMeasureStatusWindow_Load(object sender, EventArgs e)
        {
            System.ComponentModel.ComponentResourceManager resources = new System.ComponentModel.ComponentResourceManager(typeof(OTSMeasureStatusWindow));
            this.control_XRayTable1 = new Control_XRayTable();
            this.control_XRayTable1.BackColor = System.Drawing.Color.FromArgb(180, 255, 255);
            this.control_XRayTable1.Dock = System.Windows.Forms.DockStyle.Fill;
            this.control_XRayTable1.GBInfoStr = "";
            this.control_XRayTable1.GoodChineseName = "";
            this.control_XRayTable1.GoodName = "";
            this.control_XRayTable1.List_ShowElementInfo = ((System.Collections.Generic.List<OTSIncAGraph.Controls.ShowElementInfo>)(resources.GetObject("control_XRayTable1.List_ShowElementInfo")));
            this.control_XRayTable1.Location = new System.Drawing.Point(0, 0);
            this.control_XRayTable1.Margin = new System.Windows.Forms.Padding(2);
            this.control_XRayTable1.Name = "control_XRayTable1";
            this.control_XRayTable1.ShowAnalysisXray = true;
            this.control_XRayTable1.ShowSearchXray = false;
            this.control_XRayTable1.Size = new System.Drawing.Size(781, 200);
            this.control_XRayTable1.STDName = "";
            this.control_XRayTable1.TabIndex = 0;
            this.control_XRayTable1 = new OTSIncAGraph.Controls.Control_XRayTable();
            this.panelXray.Controls.Add(this.control_XRayTable1);

            //添加鼠标点击事件
            myChart.MouseClick += new MouseEventHandler(this.LZMeasureStatusWindow_MouseClick);
            picBox.MouseClick += new MouseEventHandler(HiddenXrayTablePanel_MouseClick);

            // 
            // pbBSEImage添加鼠标操作
            // 
            this.picBox.MouseUp += new MouseEventHandler(this.pbBSEImage_MouseUp);
            this.picBox.MouseDown += new MouseEventHandler(this.pbBSEImage_MouseDown);

            this.MouseUp += new MouseEventHandler(this.pbBSEImage_MouseUp);
            this.MouseDown += new MouseEventHandler(this.pbBSEImage_MouseDown);

            this.MouseWheel += new MouseEventHandler(this.pbBSEImage_MouseWheel);

            log = NLog.LogManager.GetCurrentClassLogger();
        }
        private void HiddenXrayTablePanel_MouseClick(object sender, MouseEventArgs e)
        {
            if (e.Button != MouseButtons.Right)
            {
                if (!IsShowGrayLevelLine)
                {
                    if (m_ElementPointGDIObjects != null)
                    {
                        if (m_ElementPointGDIObjects.Count > 0)
                        {
                            foreach (var item in m_ElementPointGDIObjects)
                            {

                                if (Math.Abs(e.Y - item.GetOrigionalDrawRegionF().Y) < 5 && Math.Abs(e.X - item.GetOrigionalDrawRegionF().X) < 5)
                                {
                                    //显示Xray图像
                                    panelXray.Visible = true;
                                }
                                else
                                {
                                    panelXray.Visible = false;
                                }
                            }
                        }
                    }
                }
            }
        }
        private void LZMeasureStatusWindow_MouseClick(object sender, MouseEventArgs e)
        {

            if (e.Button == MouseButtons.Right && e.Clicks == 1)
            {
                contextMenuStrip1.Show(PointToScreen(e.Location));
                SetContentMenu();
            }


        }

        #region 设置右键菜单中的项 是否可编辑
        protected void SetContextMenuEnabled(bool isEnabled)
        {
            //隐藏右键菜单中的项
            //MenuItemLineScan.Checked = false;
            MenuItemLineScan.Enabled = true;
            PointScanElementMenuItem.Enabled = isEnabled;
            bool showExprot = m_ElementPointGDIObjects.Count > 0 ? true : false;
            ExportScanInfoMenuItem.Enabled = showExprot;
            IsShowGrayLevelLine = false;
            VisualAdjustingMenu.Enabled = isEnabled;
            toolStripMenuItem1.Enabled = true;
            this.Cursor = Cursors.Default;
            this.Validate();
        }
        #endregion

        #region 获取行数据

        private void GetLineImage(int iHeight, int iWidth, ref byte[] bdata)
        {


            Stream stream = null;
            if (m_IsShowImageType == ImageType.BSEImage)
            {
                stream = new MemoryStream(originalBseData);
            }
            else if (m_IsShowImageType == ImageType.RemoveBGImage)
            {
                stream = new MemoryStream(removeBGBseData);
            }
            if (iHeight >= 0)
            {
                stream.Seek(iHeight * iWidth, SeekOrigin.Begin);
            }
            stream.Read(bdata, 0, iWidth);


        }
        #endregion

        private void panel1_Click(object sender, EventArgs e)
        {
            picBox.Show();
        }

        private void contextMenuStrip1_Opened(object sender, EventArgs e)
        {

            if (bfResult)
            {
                SampleParaLock.Enabled = true;
                ToolStripMenuItem.Enabled = true;
                grayToolStripMenuItem.Enabled = true;
                AbandonGrayStripMenuItem.Enabled = true;
                toolStripMenuItem2.Enabled = true;
                ChangeDiffImageShow.Enabled = true;
                if (0 <= m_MouseMoveImageX && m_MouseMoveImageX <= 1024)
                {
                    PointScanElementMenuItem.Enabled = true;
                }
                else
                {
                    PointScanElementMenuItem.Enabled = false;
                }
                if (!MenuItemLineScan.Checked)
                {
                    PointScanElementMenuItem.Enabled = true;
                    bool showExprot = m_ElementPointGDIObjects.Count > 0 ? true : false;
                    if (showExprot)
                    {
                        ExportScanInfoMenuItem.Enabled = true;
                    }
                }
                else
                {
                    PointScanElementMenuItem.Enabled = false;
                    ExportScanInfoMenuItem.Enabled = false;
                    return;
                }
                if (myChart.Visible)
                {
                    //MenuItemLineScan.Enabled = false;
                    PointScanElementMenuItem.Enabled = false;
                    ExportScanInfoMenuItem.Enabled = false;
                }
                else
                {
                    //MenuItemLineScan.Enabled = true;
                    PointScanElementMenuItem.Enabled = true;
                    bool showExprot = m_ElementPointGDIObjects.Count > 0 ? true : false;
                    if (showExprot)
                    {
                        ExportScanInfoMenuItem.Enabled = true;
                    }
                }
                //根据去背景方式 设置可视化使用状态
                COTSSample WSample = m_MeasureAppForm.m_ProjRstData.GetWorkingSample();
                COTSImageProcParam ImgProcPrm = WSample.GetMsrParams().GetImageProcessParam();
                if (ImgProcPrm.GetBGRemoveType() == otsdataconst.OTS_BGREMOVE_TYPE.MANUAL)
                {
                    VisualAdjustingMenu.Enabled = true;
                }
                else
                {
                    VisualAdjustingMenu.Enabled = false;
                }
            }
            else
            {
                ToolStripMenuItem.Enabled = false;
                grayToolStripMenuItem.Enabled = false;
                MenuItemLineScan.Enabled = false;
                AbandonGrayStripMenuItem.Enabled = false;
            }

        }

        //拖动灰度线
        #region 拖动灰度线 
        int LineX = 0;
        int LineXEnd = 0;
        public Point pointStart = new Point(100, 100);
        public Point pointEnd = new Point(400, 100);
        private bool m_bMouseDown = false;

        private void pictureBox1_Paint(object sender, PaintEventArgs e)
        {


            if (bfResult)
            {
                if (IsShowGrayLevelLine)
                {

                    Rectangle rectangle = GetPictureBoxZoomSize(picBox);
                    if (pointStart.Equals(pointEnd))
                    {
                        return;
                    }
                    Point start = new Point(100, pointStart.Y);
                    Point end = new Point(500, pointEnd.Y);

                    double rate = (double)picBox.Image.Height / (double)rectangle.Height;
                    int YSize = Convert.ToInt32((rate * (double)pointStart.Y));
                    //显示线扫描 黄色线的曲线数据

                    var Imagedata = new byte[m_iWidth];
                    GetYSize();

                    GetLineImage(YSize, m_iWidth, ref Imagedata);



                    DrawCurve(Imagedata, e);

                    e.Graphics.DrawLine(new Pen(Color.Red), new Point(rectangle.X, rectangle.Y + (rectangle.Height) / 4), new Point(rectangle.X + rectangle.Width, rectangle.Y + (rectangle.Height) / 4));
                    e.Graphics.DrawLine(new Pen(Color.Red), new Point(rectangle.X, rectangle.Y + rectangle.Height * 3 / 4), new Point(rectangle.X + rectangle.Width, rectangle.Y + rectangle.Height * 3 / 4));
                    e.Graphics.DrawLine(new Pen(Color.Blue), new Point(rectangle.X, pointStart.Y), new Point(rectangle.X + rectangle.Width, pointEnd.Y));

                    #region 绘制刻度条
                    float offHeight = (rectangle.Y + (rectangle.Height) / 4) - (rectangle.Y + rectangle.Height * 3 / 4);
                    float grayValue = Math.Abs(offHeight / 255);
                    //设置文字对齐方式
                    StringFormat sf = new StringFormat();
                    sf.Alignment = StringAlignment.Center;
                    sf.LineAlignment = StringAlignment.Center;
                    SolidBrush solidBrush = new SolidBrush(Color.FromArgb(100, Color.Red));
                    //字体大小 根据样品孔Rectangle大小
                    float fontSize = 15;
                    Font font = new Font("黑体", fontSize, FontStyle.Bold);

                    Pen pen = new Pen(Color.Red, 1);
                    pen.DashStyle = System.Drawing.Drawing2D.DashStyle.Custom;
                    pen.DashPattern = new float[] { 5, 5 };
                    int fontOffWidth = 50;
                    int fontOffHeight = 10;

                    int scaleLine = 0;
                    for (int i = 25; i <= 225; i += 25)
                    {
                        scaleLine = (int)(grayValue * i);
                        e.Graphics.DrawLine(pen, new Point(rectangle.X, (rectangle.Y + rectangle.Height * 3 / 4) - scaleLine), new Point(rectangle.X + fontOffWidth, (rectangle.Y + rectangle.Height * 3 / 4) - scaleLine));
                        e.Graphics.DrawString(i.ToString(), font, solidBrush, rectangle.X + 20, (rectangle.Y + rectangle.Height * 3 / 4) - scaleLine - fontOffHeight, sf);
                    }
                    #endregion
                }

            }
            if (!MenuItemLineScan.Checked)
            {
                if (m_ElementPointGDIObjects != null)
                {

                    if (m_ElementPointGDIObjects.Count > 0)
                    {
                        //绘制采集点标记
                        foreach (CRectangleGDIObject item in m_ElementPointGDIObjects)
                        {
                            if (item != null)
                            {
                                item.OnPaint(e);
                            }
                        }
                    }
                }
            }

        }
        private void pictureBox1_MouseMove(object sender, MouseEventArgs e)
        {

            //如果pictureBox1中没有图像 则return退出
            if (picBox.Image == null)
            {
                return;
            }
            Control lCtrl = (sender as Control);
            Rectangle rectangle = GetPictureBoxZoomSize(picBox);
            int startimageX = 0;
            int startimageY = 0;
            //处理灰度值
            int grayValue = 0;
            // 生成鼠标的位置
            int MouseLine = e.X;

            //当前鼠标所在图片中的位置
            int imageX = 0;
            int imageY = 0;
            //当前pictrueBox与实际图片的X、Y比例
            double rateX = 0;
            double rateY = 0;
            if (originalBseData != null)
            {
                if ((picBox.Width - rectangle.Width) / 2 < e.X && e.X < (picBox.Width - rectangle.Width) / 2 + rectangle.Width)
                {
                    imageX = e.X - (picBox.Width - rectangle.Width) / 2;
                    rateX = (double)m_iWidth / (double)rectangle.Width;
                    startimageX = Convert.ToInt32(imageX * rateX);
                    m_MouseMoveImageX = startimageX;

                    if (MoveFlag)
                    {
                        picBox.Left += Convert.ToInt32(e.X - xPos);//设置x坐标.
                        picBox.Top += Convert.ToInt32(e.Y - yPos);//设置y坐标.
                    }
                }
                else
                {
                    startimageX = 0;
                    m_MouseMoveImageX = -1;
                }
                if ((picBox.Height - rectangle.Height) / 2 < e.Y && e.Y < (picBox.Height - rectangle.Height) / 2 + rectangle.Height)
                {
                    imageY = e.Y - (picBox.Height - rectangle.Height) / 2;
                    rateY = (double)m_iHeight / (double)rectangle.Height;
                    startimageY = Convert.ToInt32(imageY * rateY);
                    m_MouseMoveImageY = startimageY;
                }
                //如果当前鼠标在图像Y轴中
                if (imageX > 0 && imageY > 0)
                {
                    if (imageY > 1)
                    {
                        startimageX = startimageX + (startimageY * m_iWidth);
                        if (m_IsShowImageType == ImageType.BSEImage)
                        {
                            grayValue = originalBseData[startimageX];
                        }
                        else
                        {
                            grayValue = removeBGBseData[startimageX];
                        }
                    }
                    else if (startimageY == 1)
                    {
                        if (m_IsShowImageType == ImageType.BSEImage)
                        {
                            grayValue = originalBseData[startimageX];
                        }
                        else
                        {
                            grayValue = removeBGBseData[startimageX];
                        }
                    }
                }
                else
                {
                    grayValue = 0;
                }
            }
            LineX = rectangle.X + 1;
            LineXEnd = rectangle.X + rectangle.Width;
            if (LineX < MouseLine && MouseLine < LineXEnd)
            {
                if (MenuItemLineScan.Checked)
                {
                    if (Math.Abs(e.Y - pointStart.Y) < 2)
                    {
                        this.Cursor = Cursors.SizeNS;
                    }
                    else
                    {
                        this.Cursor = Cursors.Default;
                    }
                }
            }

            //Y值
            double rate = (double)picBox.Image.Height / (double)rectangle.Height;
            int YSize = Convert.ToInt32((rate * (double)e.Y));

            string strGrayValue = grayValue.ToString();
            switch (strGrayValue.ToString().Length)
            {
                case 1:
                    strGrayValue = "  " + grayValue.ToString();
                    break;
                case 2:
                    strGrayValue = " " + grayValue.ToString();
                    break;
            }
            //此处调接口显示灰度值
            m_MeasureAppForm.ShowGrayVal(strGrayValue.ToString());
            if (!IsShowGrayLevelLine)
            {
                if (m_ElementPointGDIObjects != null)
                {
                    if (m_ElementPointGDIObjects.Count > 0)
                    {
                        foreach (var item in m_ElementPointGDIObjects)
                        {
                            Rectangle rect = new Rectangle(e.Location, new Size(1, 1));
                            if (Math.Abs(e.Y - item.GetOrigionalDrawRegionF().Y) < 5 && Math.Abs(e.X - item.GetOrigionalDrawRegionF().X) < 5)
                            {
                                //设置鼠标样式
                                this.Cursor = Cursors.Hand;
                            }
                            else
                            {
                                this.Cursor = Cursors.Default;
                            }
                        }
                    }
                }
            }
            if (e.Button != MouseButtons.Left)
            {
                return;
            }
            pointStart = new Point(pointStart.X, e.Y);
            pointEnd = new Point(pointEnd.X, e.Y);

            picBox.Refresh();

        }

        private void pictureBox1_MouseDown(object sender, MouseEventArgs e)
        {

            m_mouseCurrentPoint = e.Location;
            if (e.Button != MouseButtons.Left)
            {
                return;
            }
            m_bMouseDown = !m_bMouseDown;

        }
        #endregion
        //显示去背景BSE图得灰度曲线值
        #region 显示去背景BSE图得灰度曲线值
        private void ShowAbandonGrayLevelImage_Click(object sender, EventArgs e)
        {
            //设置右键菜单中的项 是否可编辑
            SetContextMenuEnabled(false);
            ShowAbandonGrayLevelImage();
            myChart.Visible = true;
            panelXray.Visible = false;
            IsShowGrayLevelLine = false;
        }
        private double[] GetGrayAbandonData(byte[] Imagedata, double[] GrayAbandonLevelData)
        {

            //获得下标每一点的灰度值，并在数组里加一
            for (int i = 0; i < Imagedata.Length; i++)
            {
                byte graylevel = Imagedata[i];
                if (graylevel > 0 && graylevel < 255)
                {
                    GrayAbandonLevelData[graylevel] += 1;
                }
            }
            return GrayAbandonLevelData;

        }
        protected void ShowAbandonGrayLevelImage()
        {

            m_imagetype = ImageType.GrayAbandonLevelChart;
            COTSSample WSample = m_MeasureAppForm.m_ProjRstData.GetWorkingSample();
            var pixelSize = WSample.CalculatePixelSize();


            var imageHandle = new CImageHandler();
            bfResult = imageHandle.GetBSEImage(WSample.GetMsrParams().GetImageProcessParam(), pixelSize, originalBseData, m_iWidth, m_iHeight, ref removeBGBseData);
            if (bfResult)
            {
                dGrayAbandonLevelData = new double[(int)GrayLevel.Max];
                GetGrayAbandonData(removeBGBseData, dGrayAbandonLevelData);
                //计算灰度去背景最大值
                dGrayAbandonLevelMax = dGrayAbandonLevelData[0];
                for (int i = 0; i < (int)GrayLevel.Max; i++)
                {

                    dGrayAbandonLevelMax = Math.Max(dGrayAbandonLevelMax, dGrayAbandonLevelData[i]);

                }
            }

            picBox.Hide();


            int[] XData = new int[(int)GrayLevel.Max];
            for (int i = 0; i < (int)GrayLevel.Max; i++)
            {
                XData[i] = i + 1;
            }
            int[] YData = new int[dGrayAbandonLevelData.Length];
            for (int i = 0; i < dGrayAbandonLevelData.Length; i++)
            {
                YData[i] = (int)dGrayAbandonLevelData[i];
            }
            chartData(XData, YData);


        }
        #endregion

        private void pictureBox1_MouseClick(object sender, MouseEventArgs e)
        {

            if (e.Button == MouseButtons.Right && e.Clicks == 1)
            {
                int XMenu = picBox.Left + e.Location.X;
                int YMenu = picBox.Top + e.Location.Y;
                Point mousePoint = new Point(XMenu, YMenu);
                contextMenuStrip1.Show(PointToScreen(mousePoint));
                //电镜位置信息
                Point semLocatin = new Point((int)dPositionX, (int)dPositionY);
                //Rectangle semRect = new Rectangle();
                if (IsSEMLocationOnTheSampleStage(semLocatin))
                {
                    SetContentMenu();
                }

            }

        }

        private void ChangeDiffImageShow_Click(object sender, EventArgs e)
        {

            SetContextMenuEnabled(true);


            //显示BSE图
            if (originalBseData != null)
            {
                //用于线扫描曲线
                m_IsShowImageType = ImageType.BSEImage;
                m_imagetype = ImageType.BSEImage;
                //在控件中显示图像
                ShowImage(m_iWidth, m_iHeight, originalBseData);
                picBox.Show();

            }




            m_CurrentMultiple = 0;
            panelXray.Visible = false;
        }

        #region 显示鼠标位置
        /// <summary>
        /// 显示鼠标位置
        /// </summary>
        /// <param name="eMouseLocation">当前处理后的鼠标路径 减去边缘</param>
        /// <param name="imageRect">Pictrue中的图像尺寸与位置</param>
        public void ShowMouseSEMCurrentLocation(Point eMouseLocation, Rectangle imageRect, Rectangle semRect)
        {
            //真实图像中心点
            Point imgRealCenterPoint = new Point();
            //显示图像中心点
            Point imgCenterPoint = new Point();
            int imgWidth = 0;
            int imgHeight = 0;
            //获取真实图片的分辨率
            m_MeasureAppForm.m_ProjParam.GetBSEImageSize(ref imgWidth, ref imgHeight);
            //根据真实图像的像素 获取真实图像中心点
            imgRealCenterPoint.X = imgWidth / 2;
            imgRealCenterPoint.Y = imgHeight / 2;
            //图像与真是图像的宽高的比例
            double witdhRote = 0;
            double heightRote = 0;
            //获取显示图像与真是图像的宽高的比例
            witdhRote = (double)imageRect.Width / imgWidth;
            heightRote = (double)imageRect.Height / imgHeight;
            //获取每个单位中包含多少像素 根据帧图的长度 与 真实图像的长度计算 
            double lenghtInPixWidth = (double)FieldWitdh / imgWidth / witdhRote;
            double lenghtInPixHeight = (double)FieldHeight / imgHeight / heightRote;
            //通过鼠标当前位置 获取位置 原点为控件的左上角起始点
            double MouseWidth = (double)eMouseLocation.X * lenghtInPixWidth;
            double MouseHeight = (double)eMouseLocation.Y * lenghtInPixHeight;
            //根据显示图像的像素 获取真实图像中心点
            imgCenterPoint.X = imageRect.Width / 2;
            imgCenterPoint.Y = imageRect.Height / 2;
            //通过鼠标当前位置 获取位置 原点为控件的左上角起始点
            double imgCenterWidth = (double)imgCenterPoint.X * lenghtInPixWidth;
            double imgCenterHeight = (double)imgCenterPoint.Y * lenghtInPixHeight;
            //获取当前鼠标坐标与SEM当前坐标的距离 单位毫米
            double apartCenterPointWidth = MouseWidth - imgCenterWidth;
            double apartCenterPointHeight = MouseHeight - imgCenterHeight;
            //将微米转换为毫米
            float mousePointX = Convert.ToSingle((apartCenterPointWidth / 1000).ToString("F3"));
            float mousePointY = Convert.ToSingle((apartCenterPointHeight / 1000).ToString("F3"));
            //根据Sem电镜当前位置 计算与SEM坐标起始点相差的距离
            //1.获取电镜当前位置
            double semX = dPositionX;
            double semY = dPositionY;
            //2.获取当前电镜位置与SEM原点位置的距离
            string apartToSEMWidth = Convert.ToSingle(semX + mousePointX).ToString("F3");
            string apartToSEMHeight = Convert.ToSingle(semY - mousePointY).ToString("F3");
            //编辑显示内容
            string STSemCoordinate = "X:" + apartToSEMWidth + "|Y:" + apartToSEMHeight + "";

        }
        #endregion

        #region 设置测量状态初始化
        /// <summary>
        /// 设置测量状态初始化
        /// </summary>
        public void SetMeasureStatusInit()
        {

            picBox.Hide();
            foreach (ToolStripItem item in contextMenuStrip1.Items)
            {
                if (item != contextMenuStrip1.Items[(int)MeasureStateMenuType.ReadBSEPic])
                {
                    item.Enabled = false;
                }
            }
        }
        #endregion






        #region 鼠标是否在图像上移动
        /// <summary>
        /// 鼠标是否在图像上移动
        /// </summary>
        /// <param name="mouseCurrentLocation"></param>
        /// <param name="picBox"></param>
        /// <returns></returns>
        public bool IsOnTheImage(Point mouseCurrentLocation, PictureBox picBox, ref Point mouseLocation, ref Rectangle imageRect)
        {
            //通过Pictrue获取图像尺寸位置
            Rectangle rectangle = GetPictureBoxZoomSize(picBox);
            imageRect = rectangle;
            //当前鼠标坐标是否包含在图像中
            bool result = imageRect.Contains(mouseCurrentLocation);
            if (result)
            {
                //获取与边框的间隔
                mouseLocation.X = mouseCurrentLocation.X - rectangle.X;
                mouseLocation.Y = mouseCurrentLocation.Y;
                return true;
            }
            return false;
        }
        #endregion

        #region 判断当前电镜位置是否在样品台内部
        /// <summary>
        /// 判断当前电镜位置是否在样品台内部
        /// </summary>
        /// <param name="semLocation">电镜当前位置</param>
        /// <param name="SampleStage">样品台尺寸与位置</param>
        /// <returns></returns>
        public bool IsSEMLocationOnTheSampleStage(Point semLocation)
        {

            return m_MeasureAppForm.m_SamplepaceWindow.m_visualStage.IfMouseInStage(semLocation);
        }
        #endregion

        #region 设置右键菜单项是否可用
        /// <summary>
        /// 设置右键菜单项是否可用
        /// </summary>
        public void SetContentMenu()
        {
            int sampleCount = m_MeasureAppForm.m_ProjParam.GetSampleCount();
            if (sampleCount == 0)
            {
                foreach (ToolStripItem item in contextMenuStrip1.Items)
                {
                    item.Enabled = false;
                }
            }
            else
            {
                if (m_MeasureAppForm.MeasureThreadRunFlag)
                {
                    if (m_MeasureAppForm.m_MsrThreadWrapper.BgWorkIsPaused())
                    {
                        foreach (ToolStripItem item in contextMenuStrip1.Items)
                        {
                            item.Enabled = true;
                        }

                    }
                    else
                    {
                        foreach (ToolStripItem item in contextMenuStrip1.Items)
                        {
                            item.Enabled = false;
                        }
                    }

                }
                double iWDistance = 0;
                double dMagni = 0;
                m_MeasureAppForm.m_ProjParam.GetWorkingSampleSEMData(ref iWDistance, ref dMagni);
                if (iWDistance != 0 && dMagni != 0)
                {
                    contextMenuStrip1.Items[(int)MeasureStateMenuType.ReadBSEPic].Enabled = true;
                }

            }

        }
        #endregion
        #region 获取线扫描初始位置
        public void GetYSize()
        {
            Rectangle rectangle = GetPictureBoxZoomSize(picBox);
            double rate = (double)picBox.Image.Height / (double)rectangle.Height;
            YSize = Convert.ToInt32((rate * (double)pointStart.Y));
        }
        #endregion

        public void chartData(int[] XData, int[] YData)
        {
            //添加数据
            myChart.Series[0].Points.DataBindXY(XData, YData);
            myChart.Series[0].Label = "";
            myChart.Series[0].LegendText = "";

            myChart.Series[0].Name = "Graph";

            myChart.Series[0].IsVisibleInLegend = false;
            switch (m_imagetype)
            {
                case ImageType.GrayLevelChart:

                    myChart.Titles[0].Text = "B-GrayCurve";

                    break;
                case ImageType.GrayAbandonLevelChart:

                    myChart.Titles[0].Text = "Remove Background Gray-scaleCurve";

                    break;
                default:
                    myChart.Titles[0].Text = "";
                    break;
            }
        }

        private void PointScanElementMenuItem_Click(object sender, EventArgs e)
        {
            MenuItemLineScan.Checked = false;
            //电镜设置对象
            //控制类对象初始化

            var expC = m_MeasureAppForm.m_ProjRstData.GetWorkingSample().GetMsrParams().GetXRayParam().GetAnalyExpCount();

            IEDSController m_EDSHardwareMgr = EDSController.GetEDSController(m_iWidth, m_iHeight, expC);

            //1.连接电镜
            if (m_EDSHardwareMgr.Connect())
            {

                COTSMsrPrjResultData cProjMgr = m_MeasureAppForm.m_ProjParam.GetResultData();
                //获取工作样品对象
                COTSSample sampleClr = cProjMgr.GetWorkingSample();

                //清空之前记录的标识
                if (m_ElementPointGDIObjects != null)
                {
                    if (m_ElementPointGDIObjects.Count > 0)
                    {
                        //清空
                        m_ElementPointGDIObjects.Clear();
                    }
                }
                //2.获取鼠标在图像的位置
                dMouseImgX = m_MouseMoveImageX;
                dMouseImgY = m_MouseMoveImageY;
                //3.根据所要扫描的位置进行元素分析
                uint a_Milliseconds = 0;
                //采集时间
                a_Milliseconds = Convert.ToUInt32(sampleClr.GetMsrParams().GetXRayParam().GetMidAnalyAQTime());
                //元素数量
                ValueType a_nElementNum = 0;
                //元素名称
                string a_strElementName = "";
                //元素Xray数据
                uint[] a_ElementXrayData = new uint[2000];


                if (GetXRayAndElements(a_Milliseconds, (int)dMouseImgX, (int)dMouseImgY, ref a_ElementXrayData, ref a_nElementNum, ref a_strElementName))
                {
                    log.Trace("--获取单点扫描数据:元素数量：'" + a_nElementNum + "' ，元素名称：'" + a_strElementName + "'--");
                    //4.在BSE上绘制扫描标记
                    //4-1 获取鼠标在BSE图上的位置
                    Point p_mouseCurrentTempPoint = m_mouseCurrentPoint;
                    //4-2 根据位置绘制标记
                    Point ImgPoint = new Point((int)dMouseImgX, (int)dMouseImgY);
                    Rectangle rect = new Rectangle(p_mouseCurrentTempPoint, new Size(1, 1));
                    CRectangleGDIObject createRect = new CRectangleGDIObject(rect, ImgPoint, m_CurrentMultiple, CreateRectangleType.DrawBSEElementSignPoint);
                    m_ElementPointGDIObjects.Add(createRect);
                    //5.获取成功后弹出对话框
                    //计数率
                    double electronicCount = 0;
                    uint[] u_ElementXrayData = new uint[2000];
                    for (int i = 0; i < a_ElementXrayData.Length; i++)
                    {
                        u_ElementXrayData[i] = (uint)a_ElementXrayData[i];
                        //累加计数率
                        electronicCount += a_ElementXrayData[i];
                    }
                    //显示Xray控件
                    panelXray.Visible = true;
                    //获取数据后，需要对xraytable设置

                    string[] strGroup = a_strElementName.Split('\n');
                    //get CElementChemistryClr list
                    List<ShowElementInfo> list_showelementinfo = new List<ShowElementInfo>();
                    for (int i = 0; i < strGroup.Length; i++)
                    {
                        if (!strGroup[i].Equals(""))
                        {
                            ShowElementInfo ls_sei = new ShowElementInfo();
                            ls_sei.ElementName = strGroup[i].Split(':')[0];
                            ls_sei.Percentage = Convert.ToDouble(strGroup[i].Split(':')[1]);
                            ls_sei.dKF = Convert.ToDouble(CListPeriodic.GetPeriodicByEleName(ls_sei.ElementName).K_Peak);
                            double de_sx2 = 0;
                            if (CListPeriodic.GetPeriodicByEleName(ls_sei.ElementName).L_Peak == "" || CListPeriodic.GetPeriodicByEleName(ls_sei.ElementName).L_Peak == "-")
                            {
                                de_sx2 = 0;
                            }
                            else
                            {
                                de_sx2 = Convert.ToDouble(CListPeriodic.GetPeriodicByEleName(ls_sei.ElementName).L_Peak);
                            }
                            ls_sei.dLF = de_sx2;
                            list_showelementinfo.Add(ls_sei);
                        }
                    }
                    //设置分析Xray数据
                    control_XRayTable1.SetXRayShowLineValue(new uint[2000], u_ElementXrayData, list_showelementinfo);
                    //需要显示计数率
                    string strElectronicCount = string.Empty;
                    if (electronicCount > 1000)
                    {
                        strElectronicCount = (Convert.ToDouble(electronicCount) / 1000).ToString("f2") + "kcps";
                    }
                    control_XRayTable1.List_ShowElementInfo = list_showelementinfo;

                }
                ExportScanInfoMenuItem.Enabled = true;
                this.Invalidate();




            }
        }
        public bool GetXRayAndElements(uint a_nXRayAQTime, int dMouseImgX, int dMouseImgY, ref uint[] a_XrayData, ref ValueType a_nElementNum, ref string a_strResult)
        {
            var expC = m_MeasureAppForm.m_ProjRstData.GetWorkingSample().GetMsrParams().GetXRayParam().GetAnalyExpCount();
            var eds = EDSController.GetEDSController(m_iWidth, m_iHeight, expC);
            var mode = m_MeasureAppForm.m_ProjRstData.GetWorkingSample().GetMsrParams().GetXRayParam().GetScanMode();
            var part = new COTSParticleClr();
            part.SetXRayPos(new Point(dMouseImgX, dMouseImgY));
            var xray = part.GetXray();
            xray.SetIndex(0);
            part.SetXray(xray);
            var parts = new List<COTSParticleClr>();
            parts.Add(part);
            if (mode == otsdataconst.OTS_X_RAY_SCAN_MODE.PointMode)
            {
                eds.GetXRayByParts(parts, a_nXRayAQTime, true);
            }
            else
            {
                eds.GetXRayByFeatures(parts, a_nXRayAQTime, true);
            }

            a_XrayData = parts[0].GetXray().GetXrayData();
            a_strResult = parts[0].GetXray().GetQuantifiedElementsStr();
            return true;

        }



        public void DelElementPointGDIObjects()
        {
            if (m_ElementPointGDIObjects != null)
            {
                if (m_ElementPointGDIObjects.Count > 0)
                {
                    //删除点标记
                    m_ElementPointGDIObjects.Clear();
                    this.Invalidate();
                }
            }
        }

        private void ExportScanInfoMenuItem_Click(object sender, EventArgs e)
        {

            //导出图片到报告中
            ExportReport();

        }
        /// <summary>
        /// 导出Image到报告
        /// </summary>
        private bool ExportReport()
        {
            string startupPath = System.Windows.Forms.Application.StartupPath + "\\TempReport\\";
            if (!Directory.Exists(startupPath))
            {
                Directory.CreateDirectory(startupPath);
            }
            //保存Xray图片
            string ImgFilePath = startupPath + DateTime.Now.ToString("yyyyMMddHHmmssfff") + ".jpg";
            Bitmap bseBM = new Bitmap(this.picBox.Width, this.picBox.Height);
            this.picBox.DrawToBitmap(bseBM, new Rectangle(0, 0, this.picBox.Width, this.picBox.Height));
            //保存图片
            bseBM.Save(ImgFilePath, System.Drawing.Imaging.ImageFormat.Jpeg);
            //释放资源
            bseBM.Dispose();
            //保存Xray图片
            string ImgXrayFilePath = startupPath + DateTime.Now.ToString("yyyyMMddHHmmssfff") + ".jpg";
            int xrayWidth = control_XRayTable1.Width;
            int xrayHeight = control_XRayTable1.Height;
            Bitmap xrayBM = new Bitmap(xrayWidth, xrayHeight);
            this.control_XRayTable1.DrawToBitmap(xrayBM, new Rectangle(0, 0, xrayWidth, xrayHeight));

            //保存图片
            xrayBM.Save(ImgXrayFilePath, System.Drawing.Imaging.ImageFormat.Jpeg);
            //释放资源
            xrayBM.Dispose();

            List<string> listFilePath = new List<string>();
            listFilePath.Add(ImgFilePath);
            listFilePath.Add(ImgXrayFilePath);

            List<ShowElementInfo> list_ElementInfo = control_XRayTable1.List_ShowElementInfo;
            //1.编辑信息
            DataTable dt = new DataTable();
            dt.Columns.Add("元素名称");
            dt.Columns.Add("原子数");
            dt.Columns.Add("质量百分比");
            dt.Columns.Add("摩尔比");
            foreach (var item in list_ElementInfo)
            {
                //获取摩尔比与原子数
                CElementChemistry cElementChemistry = new CElementChemistry();
                cElementChemistry.SetName(item.ElementName);
                cElementChemistry.SetPercentage(item.Percentage);
                double molarValue = Math.Round(cElementChemistry.GetMolarPercentage(), 2);
                int atomNum = (int)CElement.GetAtomicNum(item.ElementName);
                DataRow dr = dt.NewRow();
                dr[0] = item.ElementName;
                dr[1] = atomNum;
                dr[2] = item.Percentage;
                dr[3] = molarValue;
                dt.Rows.Add(dr);
            }
            DataGridView dgv = new DataGridView();
            dgv.DataSource = dt.DefaultView;
            List<DataTable> list_ElementData = new List<DataTable>();
            list_ElementData.Add(dt);
            //将数据插入Excel中
            return InsertDataToExcelTable(list_ElementData, startupPath, listFilePath);
        }
        public bool InsertDataToExcelTable(List<System.Data.DataTable> a_list_ElementData, string a_filePath, List<string> a_ImgFilePath)
        {
            var m_xe = new ExcelEdit();
            m_xe.Create();
            Microsoft.Office.Interop.Excel.Worksheet ws = m_xe.GetSheet("Sheet1");
            m_xe.m_ws = ws;
            string str_ExcelFilePath = a_filePath + DateTime.Now.ToString("yyyyMMddHHmmss") + ".xlsx";
            m_xe.m_ws.Shapes.AddPicture(a_ImgFilePath[0], Microsoft.Office.Core.MsoTriState.msoFalse, Microsoft.Office.Core.MsoTriState.msoTrue, 0, 0, 400, 300);
            m_xe.m_ws.Shapes.AddPicture(a_ImgFilePath[1], Microsoft.Office.Core.MsoTriState.msoFalse, Microsoft.Office.Core.MsoTriState.msoTrue, 0, 320, 400, 100);
            if (str_ExcelFilePath.IndexOf(":") < 0)
            {
                return false;
            }
            if (m_xe.m_app == null)
            {
                return false;
            }
            //数据列表 行数
            int dataRow = 30;
            //写入标题      
            foreach (var dgv in a_list_ElementData)
            {
                for (int i = 0; i < dgv.Columns.Count; i++)
                {
                    m_xe.m_ws.Cells[dataRow + 1, i + 1] = dgv.Columns[i].ColumnName;
                }
                //写入数值
                for (int r = 0; r < dgv.Rows.Count; r++)
                {
                    for (int i = 0; i < dgv.Columns.Count; i++)
                    {
                        m_xe.m_ws.Cells[dataRow + r + 2, i + 1] = dgv.Rows[r].ItemArray[i];
                    }
                    System.Windows.Forms.Application.DoEvents();
                }
            }
            //列宽自适应
            m_xe.m_ws.Columns.EntireColumn.AutoFit();
            if (str_ExcelFilePath != "")
            {
                try
                {
                    m_xe.m_wb.Saved = true;
                    m_xe.m_wb.SaveCopyAs(str_ExcelFilePath);
                }
                catch (Exception ex)
                {
                    log.Error(ex.ToString());
                }
            }
            //关闭excel
            m_xe.Close();
            //强行销毁   
            GC.Collect();
            //干掉进程里的EXCEL
            foreach (System.Diagnostics.Process p in System.Diagnostics.Process.GetProcesses())
            {
                if (p.ProcessName == "EXCEL")
                {
                    p.Kill();
                }
            }
            //删除图片文件
            foreach (string imgPath in a_ImgFilePath)
            {
                if (File.Exists(imgPath))
                {
                    //如果存在则删除
                    File.Delete(imgPath);
                }
            }
            System.Diagnostics.Process.Start(str_ExcelFilePath);
            return true;
        }

        public void HideXRayTable()
        {
            panelXray.Visible = false;
            //清空元素标记对象
            if (m_ElementPointGDIObjects != null)
            {
                if (m_ElementPointGDIObjects.Count > 0)
                {
                    m_ElementPointGDIObjects.Clear();
                }
            }
        }


        //在picturebox的鼠标按下事件里,记录三个变量.
        int xPos;
        int yPos;
        bool MoveFlag = false;
        private void pbBSEImage_MouseDown(object sender, System.Windows.Forms.MouseEventArgs e)
        {
            if (e.Button == MouseButtons.Left)
            {
                //在线扫描未选中的情况下 设置移动标识与获取当前鼠标位置
                if (!(MenuItemLineScan.Checked))
                {
                    MoveFlag = true;//已经按下.
                    xPos = e.X;//当前x坐标.
                    yPos = e.Y;//当前y坐标.
                }
                else
                {
                    MoveFlag = false;
                }

            }
        }

        //在picturebox的鼠标按下事件里.
        private void pbBSEImage_MouseUp(object sender, MouseEventArgs e)
        {

            MoveFlag = false;
        }

        //在picturebox鼠标移动
        private void pbBSEImage_MouseMove(object sender, MouseEventArgs e)
        {
            if (MoveFlag)
            {
                picBox.Left = Convert.ToInt32(e.X - xPos);//设置x坐标.
                picBox.Top = Convert.ToInt32(e.Y - yPos);//设置y坐标.
            }
        }
        //在picturebox鼠标缩放
        private void pbBSEImage_MouseWheel(object sender, MouseEventArgs e)
        {
            //鼠标滚动缩放 BSE图
            if (e.Delta > 0)
            {
                if (m_CurrentMultiple < m_MaxMultipleRange)
                {
                    m_CurrentMultiple += Convert.ToSingle(m_Multiple.ToString("f2"));
                    picBox.Width += Convert.ToInt32(m_iWidth * m_Multiple);
                    picBox.Height += Convert.ToInt32(m_iHeight * m_Multiple);
                    WheelElementPointGDIObjects(e.Location, m_CurrentMultiple);
                }
            }
            else
            {
                m_CurrentMultiple -= Convert.ToSingle(m_Multiple.ToString("f2"));
                if (m_CurrentMultiple > 0)
                {
                    picBox.Width -= Convert.ToInt32(m_iWidth * m_Multiple);
                    picBox.Height -= Convert.ToInt32(m_iHeight * m_Multiple);
                }
                else
                {
                    m_CurrentMultiple = 0;

                    picBox.Height = this.RestoreBounds.Height;
                    picBox.Width = this.RestoreBounds.Height * 4 / 3;
                    picBox.Left = 0;
                    picBox.Top = 0;
                    Rectangle rectangle = GetPictureBoxZoomSize(picBox);
                    Point sizeChangePoint = rectangle.Location;
                    //修改窗体宽度后，设置单点采集的位置
                    if (m_ElementPointGDIObjects != null)
                    {
                        if (m_ElementPointGDIObjects.Count > 0)
                        {
                            if (m_GetBSEImageInitPoint != sizeChangePoint)
                            {
                                int sizeChangeX = sizeChangePoint.X - m_GetBSEImageInitPoint.X;
                                int sizeChangeY = sizeChangePoint.Y - m_GetBSEImageInitPoint.Y;
                                RectangleF sizeChangeRectF = m_ElementPointGDIObjects[0].GetZoomedRegionF();
                                sizeChangeRectF.X = m_ElementPointGDIObjects[0].GetZoomedRegionF().X + sizeChangeX;
                                m_ElementPointGDIObjects[0].SetInitRegionF(sizeChangeRectF);
                                m_GetBSEImageInitPoint = sizeChangePoint;
                            }
                        }
                    }
                }
                WheelElementPointGDIObjects(e.Location, m_CurrentMultiple);
            }
        }
        /// <summary>
        /// 缩放时改变 单点标识位置
        /// </summary>
        /// <param name="m_CurrentMultiple"></param>
        public void WheelElementPointGDIObjects(Point refPoint, float CurrentMultiple)
        {
            if (m_ElementPointGDIObjects.Count > 0)
            {
                foreach (CRectangleGDIObject item in m_ElementPointGDIObjects)
                {

                    item.Zoom(refPoint, CurrentMultiple);
                }
            }
        }

        //private void button1_Click(object sender, EventArgs e)
        //{
        //    COTSSample cSample = m_MeasureAppForm.m_ProjParam.GetWorkSample();
        //    int start = cSample.GetMsrParams().GetImageProcessParam().GetBGGray().GetStart();
        //    int end = cSample.GetMsrParams().GetImageProcessParam().GetBGGray().GetEnd();
        //    Image bInput = picBox.Image;
        //    List<ColorMap> colorMapTemp = new List<ColorMap>();
        //    for (int i = start; i <= end; i++)
        //    {
        //        ColorMap colorMap = new ColorMap();
        //        string colorName = "#" + Color.FromArgb(i, i, i).Name.ToString();
        //        colorMap.OldColor = ColorTranslator.FromHtml(colorName);
        //        colorMap.NewColor = Color.Red;
        //        colorMapTemp.Add(colorMap);
        //    }
        //    Bitmap outBitmap = new Bitmap(bInput);
        //    //创建Graphics对象
        //    Graphics g = Graphics.FromImage(outBitmap);
        //    //生成的图像大小
        //    int width = bInput.Width;
        //    int height = bInput.Height;
        //    //编辑被着急图像所要显示的位置
        //    Rectangle DrawRect = new Rectangle(0, 0, 1024, 768);
        //    //编辑输出画布中着色的位置
        //    Rectangle ShowRect = new Rectangle(0, 0, 1024, 768);
        //    ImageAttributes attr = new ImageAttributes();
        //    attr.SetRemapTable(colorMapTemp.ToArray());
        //    //从输入图像中截图至临时图像中
        //    g.DrawImage(bInput, ShowRect, 0, 0, DrawRect.Width, DrawRect.Height, GraphicsUnit.Pixel, attr);
        //    picBox.Image = outBitmap;
        //}

        private void OTSMeasureStatusWindow_MouseClick(object sender, MouseEventArgs e)
        {

            if (e.Button == MouseButtons.Right && e.Clicks == 1)
            {

                contextMenuStrip1.Show(PointToScreen(e.Location));
                SetContentMenu();
            }

        }

        private void ViewStripMenuItem_Click(object sender, EventArgs e)
        {
            if (m_iWidth == 0 || m_iHeight == 0)
            {
                string str = m_MeasureAppForm.m_ProjParam.GetBSEImageResolutionStr();// 举例：1024X768 
                string[] sArray = str.Split('X');
                if (sArray[0] != "" && sArray[1] != "")
                {
                    m_iWidth = Convert.ToInt32(sArray[0]);
                    m_iHeight = Convert.ToInt32(sArray[1]);
                }

            }

            ToolWindow toolWindow = new ToolWindow(m_MeasureAppForm, this);
            int grayStart = 0;
            int grayEnd = 0;
            if (originalBseData != null)
            {
                Bitmap bitmap = CImageHandler.ToGrayBitmap(originalBseData, m_iWidth, m_iHeight);
                toolWindow.BseImg = bitmap;
                toolWindow.BBseData = originalBseData;
                //获取去背景灰度值
                grayStart = m_MeasureAppForm.m_ProjParam.GetWorkSample().GetMsrParams().GetImageProcessParam().GetBGGray().GetStart();
                grayEnd = m_MeasureAppForm.m_ProjParam.GetWorkSample().GetMsrParams().GetImageProcessParam().GetBGGray().GetEnd();
                //设置可视化中的属性
                toolWindow.BseGrayMinValue = grayStart;
                toolWindow.BseGrayMaxValue = grayEnd;
            }
            DialogResult dialogResult = toolWindow.ShowDialog();
            if (dialogResult == DialogResult.Yes)
            {
                //获取去背景参数
                grayStart = toolWindow.BseGrayMinValue;
                grayEnd = toolWindow.BseGrayMaxValue;
                //设置去背景参数
                COTSImageProcParam cOTSImgProc;
                cOTSImgProc = m_MeasureAppForm.m_ProjParam.GetResultData().GetWorkingSample().GetMsrParams().GetImageProcessParam();
                CIntRange cIntRange = new CIntRange();
                cIntRange.SetStart(grayStart);
                cIntRange.SetEnd(grayEnd);
                cOTSImgProc.SetBGGray(cIntRange);
                m_MeasureAppForm.m_ProjParam.GetResultData().GetWorkingSample().GetMsrParams().SetImageProcessParam(cOTSImgProc);
                //更新属性窗口
                m_MeasureAppForm.UpdatePropertyVal();
                //确认后进行去背景
                var m_systype = m_MeasureAppForm.m_ProjParam.GetResultData().SystemTypeId;
                if (m_systype == otsdataconst.OTS_SysType_ID.CleannessA)
                {
                    ShowColoredRemoveBGImage();
                }
                else
                {
                    ShowRemoveBGImage();
                }

            }
        }

        private void toolStripMenuItem1_Click(object sender, EventArgs e)
        {
            if (m_iWidth == 0 || m_iHeight == 0)
            {
                string str = m_MeasureAppForm.m_ProjParam.GetBSEImageResolutionStr();// 举例：1024X768 
                string[] sArray = str.Split('X');
                if (sArray[0] != "" && sArray[1] != "")
                {
                    m_iWidth = Convert.ToInt32(sArray[0]);
                    m_iHeight = Convert.ToInt32(sArray[1]);
                }

            }
            SpecialParticleForm specialParticleForm = new SpecialParticleForm(CSpecialGrayRangeParam.GetParamFileFullName(), m_MeasureAppForm, originalBseData, m_iWidth, m_iHeight, this);
            DialogResult dialogResult = specialParticleForm.ShowDialog();


        }

        private void toolStripMenuItem2_Click(object sender, EventArgs e)
        {
            //设置右键菜单中的项 是否可编辑
            SetContextMenuEnabled(true);
            ShowColoredRemoveBGImage();
            m_CurrentMultiple = 0;
            panelXray.Visible = false;
        }
    }
}