OTS/OTSIncAMeasureApp/5-OTSMeasureStatuImageFun/OTSMeasureStatusWindow.cs

using System;
using System.Collections.Generic;
using System.Drawing;
using System.Windows.Forms;
using OTS.WinFormsUI.Docking;
using System.IO;

/*处理ImageDispos*/
using OTSSysMgrTools;
/*处理PropertyInfo*/
using System.Reflection;
using NSOTSController;

using System.Data;
using System.Collections;
using System.Drawing.Imaging;
using OTSIncAGraph.Controls;
using OTSModelSharp;
using OTSDataType;

namespace OTSMeasureApp
{
    public partial class OTSMeasureStatusWindow : DockContent
    {

        #region 全部变量
        public OTSIncAMeasureAppForm m_MeasureAppForm;
        /* 接收图像数据 */
        public byte[] Imagedata = new byte[m_iWidth];

        static int m_iWidth = 1024;
        static int m_iHeight = 704;

        OTSImageData m_ImageData = null;
        //获取BSE图时最初的位置
        Point m_GetBSEImageInitPoint = new Point();
        // 调试图图片数据
        public byte[] bBseData;
        //去背景图
        public byte[] cBseData;

        //灰度图数据
        public double[] dGrayLevelData;
        //灰度峰值
        public double dGrayLevelMax;
        //去背景灰度图数据
        public double[] dGrayAbandonLevelData;
        //去背景灰度峰值
        public double dGrayAbandonLevelMax;

        public string FileName;

        //原图Y轴
        int YSize = 0;

        int drawflag = 0;

        private int height = 0;
        private int width = 0;
        //画布大小
        private Bitmap bitmap;
        private Graphics graphics;
        private float Tension = 0.001f;
        //要画曲线的点y坐标值,x值为10s采集一次数据
        private float[] curvebuf = new float[] { 20.0f, 30.0f, 40.0f, 35.4f, 21.6f, 32.8f, 5.2f, 9.9f, 30f, 35.3f, 25.3f, 21.2f, 30.2f, 22.8f, 40.5f, 5.6f, 20.6f };
        //记录鼠标在BSE移动时 图像的位置
        double m_MouseMoveImageX = -1;
        double m_MouseMoveImageY = -1;
        //采集时间(毫秒)
        //int m_Milliseconds = 120;
        //记录采集点
        List<Point> m_ElementSignPoint = new List<Point>();
        //绘制采集点对象
        public static List<ARectangleGDIObject> m_ElementPointGDIObjects;
        Point m_mouseCurrentPoint = new Point();
        //鼠标缩放倍数
        float m_CurrentMultiple = 0;
        float m_Multiple = 0.2f;
        int m_MaxMultipleRange = 4;
        //单击采集的鼠标位置
        double dMouseImgX = 0;
        double dMouseImgY = 0;
        NLog.Logger log;
        //国际化
        OTSSysMgrTools.Language lan;
        Hashtable table;

        #endregion
        #region 在右下角状态栏中显示鼠标当前位置所需要的参数
        double dPositionX = 0;
        double dPositionY = 0;
        double dPositionR = 0;
        double Magnification = 0;
        int FieldWitdh = 0;
        double FieldHeight = 0;
        #endregion
        private enum ImageType
        {
            //BSE图
            BSEImage = 0,
            //去背景图
            RemoveBGImage = 1,
            //显示灰度曲线图
            GrayLevelChart = 2,
            //显示去背景BSE图灰度曲线
            GrayAbandonLevelChart = 4,
            //线扫描曲线
            GrayLevelLine = 3
        }
        //图bfResult
        public static bool bfResult = false;
        //当前是否显示线扫描
        public static bool IsShowGrayLevelLine = false;
        //当前默认值
        ImageType imagetype = ImageType.BSEImage;
        ImageType IsShowImageType = ImageType.BSEImage;


        public OTSMeasureStatusWindow(OTSIncAMeasureAppForm MeasureApp)
        {

            InitializeComponent();
            m_MeasureAppForm = MeasureApp;
            if (m_ImageData == null)
            {
                m_ImageData = new OTSImageData(this, m_MeasureAppForm);
            }
            m_ElementPointGDIObjects = new List<ARectangleGDIObject>();
            //进入时首先对XRayTable进行隐藏
            panelXray.Visible = false;
            //国际化
            lan = new OTSSysMgrTools.Language(this);
            table = lan.GetNameTable(this.Name);
        }
        /// <summary>
        /// 在控件中显示BSE图像
        /// </summary>
        /// <param name="m_iWidth"></param>
        /// <param name="m_iHeigh"></param>
        /// <param name="bBseData"></param>
        public void ShowImage(int m_iWidth, int m_iHeigh, byte[] bBseData)
        {
            try
            {
                Bitmap bitmap = ImageDispose.ToGrayBitmap(bBseData, m_iWidth, m_iHeigh);
                pbBSEImage.Image = bitmap;
                //设置Pictrue显示位置
                pbBSEImage.Height = this.RestoreBounds.Height;
                pbBSEImage.Width = this.RestoreBounds.Height * 4 / 3;
                //获取黄线坐标位置
                Rectangle rectangle = GetPictureBoxZoomSize(pbBSEImage);
                m_GetBSEImageInitPoint = rectangle.Location;
                pointStart.X = rectangle.X;
                pointEnd.X = rectangle.X + rectangle.Width;
                pointStart.Y = rectangle.Y + (rectangle.Height) / 2;
                pointEnd.Y = rectangle.Y + (rectangle.Height) / 2;
                pbBSEImage.Left = 0;
                pbBSEImage.Top = 0;
            }
            catch (Exception ex)
            {
                log.Error("(LZMeasureStatusWindow.ShowImage)  " + ex.ToString());
            }
        }

        /// <summary>
        /// 在控件中显示图像
        /// </summary>
        /// <param name="m_iWidth"></param>
        /// <param name="m_iHeigh"></param>
        /// <param name="bBseData"></param>
        public Image ShowImageStatus(int m_iWidth, int m_iHeigh, byte[] bBseData)
        {
            try
            {
                return ImageDispose.ToGrayBitmap(bBseData, m_iWidth, m_iHeigh);
            }
            catch (Exception ex)
            {

                log.Error("(LZMeasureStatusWindow.ShowImage)  " + ex.ToString());
                return null;
            }
        }
        //显示扫描曲线图方法
        #region 显示扫描曲线图方法        
        private void DrawCurve(byte[] buf, PaintEventArgs e)
        {
            try
            {
                //创建位图
                Rectangle rectangle = GetPictureBoxZoomSize(pbBSEImage);
                double rate = (double)rectangle.Height / (double)pbBSEImage.Image.Height;
                width = rectangle.Width;
                height = rectangle.Height;
                bitmap = new Bitmap(width, height);
                //创建Graphics类对象
                graphics = Graphics.FromImage(bitmap);
                //清空图片背景色
                //graphics.Clear(Color.White);
                Font font = new System.Drawing.Font("Arial", 9, FontStyle.Regular);

                Brush brush2 = new SolidBrush(Color.SaddleBrown);
                Brush brushPoint = new SolidBrush(Color.Red);

                Pen mypenRed = new Pen(Color.Red, 1);
                Pen mypenYellow = new Pen(Color.Yellow, 0.001f);//点颜色

                //画曲线
                if (drawflag == 1)
                {
                    int len = Imagedata.Length;
                    PointF[] CurvePointF = new PointF[len];//坐标点
                    float pointX = 0;
                    float pointY = 0;
                    for (int i = 0; i < Imagedata.Length; i++)
                    {
                        pointX = (pbBSEImage.Width - rectangle.Width) / 2 + Convert.ToSingle(i * rate);
                        float imagei = (int)GrayLevel.Max - Convert.ToInt32(Imagedata[i]);
                        float imagerate = (Convert.ToSingle(Convert.ToDouble(rectangle.Height) / 510));
                        pointY = imagei * imagerate + (rectangle.Height) / 4;
                        if (pointY > ((rectangle.Height) * 3 / 4))
                        {
                            float ii = pointY;

                        }
                        CurvePointF[i] = new PointF(pointX, pointY);
                    }

                    e.Graphics.DrawCurve(mypenYellow, CurvePointF, Tension);//画曲线

                }
            }
            catch (Exception ex)
            {

                log.Error("(LZMeasureStatusWindow.DrawCurve)  " + ex.ToString());

            }
        }
        #endregion

        //处理获取调试图菜单事件
        #region 处理获取调试图菜单事件
        private void AcquireBSEImage_Click(object sender, EventArgs e)
        {
            try
            {
                if (m_ElementPointGDIObjects != null)
                {
                    m_ElementPointGDIObjects.Clear();
                }
                //设置右键菜单中的项 是否可编辑
                SetContextMenuEnabled(true);
                GetAcquireBSEImage();

            }
            catch (Exception ex)
            {
                MessageBox.Show(table["message20"].ToString() + ex.ToString());
            }
            try
            {
                DelElementPointGDIObjects();
                panelXray.Visible = false;
                m_CurrentMultiple = 0;
            }
            catch (Exception ex)
            {
                MessageBox.Show(table["message21"].ToString() + ex.ToString());
            }
        }
        /// <summary>
        /// 获取BSE图方法
        /// </summary>
        private void GetAcquireBSEImage()
        {
            try
            {
                //获取电镜中图像大小
                string str = m_MeasureAppForm.m_ProjParam.GetBSEImageSize();// 举例：1024X768 
                string[] sArray = str.Split('X');
                if (sArray[0] != "" && sArray[1] != "")
                {
                    m_iWidth = Convert.ToInt32(sArray[0]);
                    m_iHeight = Convert.ToInt32(sArray[1]);
                }
                //建立图像数据
                bBseData = new byte[m_iWidth * m_iHeight];
                //获取图像数据
                int nDwellTime = 4;
                try
                {
                    int level = (int)m_MeasureAppForm.m_ProjParam.m_ResultData.GetWorkingSample().GetMsrParams().GetImageScanParam().GetScanImageSpeed();
                    switch (level)
                    {
                        case 0:
                            nDwellTime = 4;
                            break;
                        case 1:
                            nDwellTime = 8;
                            break;
                        case 2:
                            nDwellTime = 16;
                            break;
                    }
                }
                catch (Exception)
                {
                    nDwellTime = 8;
                }
                OTSBSEImageFun m_GetBseImage = new OTSBSEImageFun();
                int imageCount = m_GetBseImage.GetScanImage(m_iWidth, m_iHeight, ref bBseData);
                //取图不成功就返回
                if (imageCount > 0)
                {
                    bfResult = true;
                }
                if (!bfResult)
                {
                    if (contextMenuStrip1.Items[(int)MeasureStateMenuType.ChangeDiffImageShow].Enabled == true)
                    {
                        contextMenuStrip1.Items[(int)MeasureStateMenuType.ChangeDiffImageShow].Enabled = false;
                    }
                    //显示单点扫描元素信息菜单
                    contextMenuStrip1.Items[(int)MeasureStateMenuType.PointScanElementMenuItem].Enabled = false;
                    pbBSEImage.Hide();
                    return;
                }
                else
                {
                    //显示单点扫描元素信息菜单
                    contextMenuStrip1.Items[(int)MeasureStateMenuType.PointScanElementMenuItem].Enabled = true;
                }
                //获取灰度图数据
                dGrayLevelData = new double[(int)GrayLevel.Max];
                dGrayLevelData = m_ImageData.GetGaryData(bBseData, dGrayLevelData);

                //计算灰度最大值
                dGrayLevelMax = dGrayLevelData[0];
                for (int i = 1; i < (int)GrayLevel.Max; i++)
                {
                    dGrayLevelMax = Math.Max(dGrayLevelMax, dGrayLevelData[i]);
                }
                SetClickMenuBSEImg();
                //更新当前的图
                UpdataImageChart();

                myChart.Visible = false;

                //图像加载后的显示位置
                m_CurrentMultiple = 0;
                //pbBSEImage.Height = this.RestoreBounds.Height;
                //pbBSEImage.Width = this.RestoreBounds.Width;

                pbBSEImage.Height = this.RestoreBounds.Height;
                pbBSEImage.Width = this.RestoreBounds.Height * 4 / 3;
                pbBSEImage.Left = 0;
                pbBSEImage.Top = 0;
                
            }
            catch (Exception ex)
            {
                log.Error("(LZMeasureStatusWindow.AcquireBSEImage_Click)  " + ex.ToString());
            }
        }
        #endregion

        #region 设置点击BSE菜单
        public void SetClickMenuBSEImg()
        {
            //用于线扫描曲线
            IsShowImageType = ImageType.BSEImage;
            imagetype = ImageType.BSEImage;
            pbBSEImage.Show();
            //panel1.Visible = false;
            //panel1.Hide();

        }
        #endregion

        //更新当前的图
        #region 更新当前的图
        private void UpdataImageChart()
        {
            try
            {
                switch (imagetype)
                {
                    case ImageType.BSEImage:
                        {
                            //在控件中显示图像
                            ShowImage(m_iWidth, m_iHeight, bBseData);
                            Imagedata = new byte[m_iWidth];
                            IsShowGrayLevelLine = false;
                            //获取默认Y轴
                            GetYSize();
                            //获取行数据
                            GetLineImage(YSize, m_iWidth, ref Imagedata);
                        }
                        break;
                    case ImageType.RemoveBGImage:
                        {
                            ShowImage(m_iWidth, m_iHeight, cBseData);
                            Imagedata = new byte[m_iWidth];
                            IsShowGrayLevelLine = false;
                            //获取默认Y轴
                            GetYSize();
                            //获取行数据
                            GetLineImage(YSize, m_iWidth, ref Imagedata);
                        }
                        break;
                    case ImageType.GrayLevelLine:
                        {
                            GetLineImage(YSize, m_iWidth, ref Imagedata);
                        }
                        break;
                    default:
                        { }
                        break;

                }
                this.Refresh();
            }
            catch (Exception ex)
            {
                log.Error("(LZMeasureStatusWindow.UpdataImageChart)  " + ex.ToString());

            }
        }
        #endregion
        //显示去背景图 = AUTO
        #region 显示去背景图
        private void ShowRemoveBGImage_Click(object sender, EventArgs e)
        {
            //设置右键菜单中的项 是否可编辑
            SetContextMenuEnabled(true);
            ShowRemoveBGImage();
            m_CurrentMultiple = 0;
            panelXray.Visible = false;
        }
        protected void ShowRemoveBGImage()
        {
            try
            {
                //获取电镜中图像大小
                string str = m_MeasureAppForm.m_ProjParam.GetBSEImageSize();
                string[] sArray = str.Split('X');
                if (sArray[0] != "" && sArray[1] != "")
                {
                    m_iWidth = Convert.ToInt32(sArray[0]);
                    m_iHeight = Convert.ToInt32(sArray[1]);
                }
                //获取图像数据
                COTSSample WSample = m_MeasureAppForm.m_ProjData.GetWorkingSample();
                bfResult = m_ImageData.ShowRemoveBGImage(WSample,m_iWidth, m_iHeight, bBseData, ref cBseData);
                //将去背景的数据 赋值到主窗体变量中 作为测试
                //m_MeasureAppForm.m_BSEData = cBseData;
                //取图不成功就返回
                if (!bfResult) { return; }

                //获取去背景灰度图数据
                dGrayAbandonLevelData = new double[(int)GrayLevel.Max];
                dGrayAbandonLevelData = m_ImageData.GetGrayAbandonData(cBseData, dGrayAbandonLevelData);

                //计算灰度去背景最大值
                dGrayAbandonLevelMax = dGrayAbandonLevelData[0];
                for (int i = 1; i < (int)GrayLevel.Max; i++)
                {
                    dGrayAbandonLevelMax = Math.Max(dGrayAbandonLevelMax, dGrayAbandonLevelData[i]);
                }
                //用于线扫描曲线
                IsShowImageType = ImageType.RemoveBGImage;
                imagetype = ImageType.RemoveBGImage;
                UpdataImageChart();
                //panel1.Hide();
                //panel1.Visible = false;
                myChart.Visible = false;
                pbBSEImage.Show();
                //切换显示至BSE图
                contextMenuStrip1.Items[(int)MeasureStateMenuType.ChangeDiffImageShow].Enabled = true;
                if (OTSSysMgrTools.Language.ReadDefaultLanguage() == "ZH")
                {
                    contextMenuStrip1.Items[(int)MeasureStateMenuType.ChangeDiffImageShow].Text = "切换显示至BSE图";
                }
                else
                {
                    contextMenuStrip1.Items[(int)MeasureStateMenuType.ChangeDiffImageShow].Text = "SwitchDisplayToBSEDiagram";
                }
            }
            catch (Exception ex)
            {
                log.Error("(LZMeasureStatusWindow.ShowRemoveBGImage_Click)  " + ex.ToString());
            }
        }
        #endregion
        //显示灰度曲线
        #region 显示灰度曲线
        private void ShowGrayLevelImage_Click(object sender, EventArgs e)
        {
            //设置右键菜单中的项 是否可编辑
            SetContextMenuEnabled(false);
            ShowGrayLevelImage();
            myChart.Visible = true;
            panelXray.Visible = false;
            IsShowGrayLevelLine = false;
        }
        protected void ShowGrayLevelImage()
        {
            try
            {
                imagetype = ImageType.GrayLevelChart;
                //panel1.Visible = true;
                //panel1.Show();
                pbBSEImage.Hide();
                m_ImageData.Line = idLine.GrayImage;
                //切换显示至BSE图
                contextMenuStrip1.Items[(int)MeasureStateMenuType.ChangeDiffImageShow].Enabled = true;
                contextMenuStrip1.Items[(int)MeasureStateMenuType.ChangeDiffImageShow].Enabled = true;
                if (OTSSysMgrTools.Language.ReadDefaultLanguage() == "ZH")
                {
                    contextMenuStrip1.Items[(int)MeasureStateMenuType.ChangeDiffImageShow].Text = "切换显示至BSE图";
                }
                else
                {
                    contextMenuStrip1.Items[(int)MeasureStateMenuType.ChangeDiffImageShow].Text = "SwitchDisplayToBSEDiagram";
                }
                UpdataImageChart();

                int[] XData = new int[(int)GrayLevel.Max];
                for (int i = 0; i < (int)GrayLevel.Max; i++)
                {
                    XData[i] = i + 1;
                }
                int[] YData = new int[dGrayLevelData.Length];
                for (int i = 0; i < dGrayLevelData.Length; i++)
                {
                    YData[i] = (int)dGrayLevelData[i];
                }
                chartData(XData, YData);

            }
            catch (Exception ex)
            {
                log.Error("(LZMeasureStatusWindow.ShowGrayLevelImage_Click)  "
                    + ex.ToString());

            }
        }

        #endregion
        //显示线扫描曲线
        #region  显示线扫描曲线
        private void ShowGrayLevelLine_Click(object sender, EventArgs e)
        {
            panelXray.Visible = false;
            ShowGrayLevelLine();
        }
        protected void ShowGrayLevelLine()
        {
            try
            {
                imagetype = ImageType.GrayLevelLine;
                //取图不成功就返回
                if (!bfResult) { return; }
                UpdataImageChart();
                m_ImageData.Line = idLine.GrayLine;
            }
            catch (Exception ex)
            {
                log.Error("(LZMeasureStatusWindow.ShowGrayLevelLine_Click)  " + ex.ToString());
            }
        }
        #endregion

        #region  扫描线轴X
        public Rectangle GetPictureBoxZoomSize(PictureBox p_PictureBox)
        {
            if (p_PictureBox != null)
            {
                PropertyInfo _ImageRectanglePropert = p_PictureBox.GetType().GetProperty("ImageRectangle", BindingFlags.Instance | BindingFlags.NonPublic);

                return (Rectangle)_ImageRectanglePropert.GetValue(p_PictureBox, null);
            }
            return new Rectangle(0, 0, 0, 0);
        }
        #endregion

        private void OTSMeasureStatusWindow_Load(object sender, EventArgs e)
        {
            //panel1.Hide();
            //添加鼠标点击事件
            myChart.MouseClick += new MouseEventHandler(this.LZMeasureStatusWindow_MouseClick);
            pbBSEImage.MouseClick += new MouseEventHandler(HiddenXrayTablePanel_MouseClick);

            // 
            // pbBSEImage添加鼠标操作
            // 
            this.pbBSEImage.MouseUp += new MouseEventHandler(this.pbBSEImage_MouseUp);
            this.pbBSEImage.MouseDown += new MouseEventHandler(this.pbBSEImage_MouseDown);
            //this.pbBSEImage.MouseMove += new MouseEventHandler(this.pbBSEImage_MouseMove);
            this.MouseUp += new MouseEventHandler(this.pbBSEImage_MouseUp);
            this.MouseDown += new MouseEventHandler(this.pbBSEImage_MouseDown);
            //this.MouseMove += new MouseEventHandler(this.pbBSEImage_MouseMove);
            this.MouseWheel += new MouseEventHandler(this.pbBSEImage_MouseWheel);

            log = NLog.LogManager.GetCurrentClassLogger();
        }
        private void HiddenXrayTablePanel_MouseClick(object sender, MouseEventArgs e)
        {
            if (e.Button != MouseButtons.Right)
            {
                if (!IsShowGrayLevelLine)
                {
                    if (m_ElementPointGDIObjects != null)
                    {
                        if (m_ElementPointGDIObjects.Count > 0)
                        {
                            foreach (var item in m_ElementPointGDIObjects)
                            {
                                Rectangle rect = new Rectangle(e.Location, new Size(1, 1));
                                if (Math.Abs(e.Y - item.DrawRegionF.Y) < 5 && Math.Abs(e.X - item.DrawRegionF.X) < 5)
                                {
                                    //显示Xray图像
                                    panelXray.Visible = true;
                                }
                                else
                                {
                                    panelXray.Visible = false;
                                }
                            }
                        }
                    }
                }
            }
        }
        private void LZMeasureStatusWindow_MouseClick(object sender, MouseEventArgs e)
        {

            try
            {
                if (e.Button == MouseButtons.Right && e.Clicks == 1)
                {
                    contextMenuStrip1.Show(PointToScreen(e.Location));
                    SetContentMenu();
                }
            }
            catch (Exception ex)
            {
                log.Error("(LZMeasureStatusWindow.LZMeasureStatusWindow_MouseClick)  " + ex.ToString());
            }

        }

        #region 设置右键菜单中的项 是否可编辑
        protected void SetContextMenuEnabled(bool isEnabled)
        {
            //隐藏右键菜单中的项
            MenuItemLineScam.Checked = false;
            MenuItemLineScam.Enabled = isEnabled;
            PointScanElementMenuItem.Enabled = isEnabled;
            bool showExprot = m_ElementPointGDIObjects.Count > 0 ? true : false;
            ExportScanInfoMenuItem.Enabled = showExprot;
            IsShowGrayLevelLine = false;
            ViewStripMenuItem.Enabled = isEnabled;
            this.Cursor = Cursors.Default;
            this.Validate();
        }
        #endregion

        #region 获取行数据

        private void GetLineImage(int iHeight, int iWidth, ref byte[] bdata)
        {

            try
            {
                Stream stream = null;
                if (IsShowImageType == ImageType.BSEImage)
                {
                    stream = new MemoryStream(bBseData);
                }
                else if (IsShowImageType == ImageType.RemoveBGImage)
                {
                    stream = new MemoryStream(cBseData);
                }
                if (iHeight >= 0)
                {
                    stream.Seek(iHeight * iWidth, SeekOrigin.Begin);
                }
                stream.Read(bdata, 0, iWidth);
            }
            catch (Exception ex)
            {

                log.Error("(LZMeasureStatusWindow.GetLineImage)  " + ex.ToString());


            }
        }
        #endregion

        private void panel1_Click(object sender, EventArgs e)
        {
            pbBSEImage.Show();
        }

        private void contextMenuStrip1_Opened(object sender, EventArgs e)
        {
            try
            {
                if (bfResult)
                {
                    SampleParaLock.Enabled = true;
                    ToolStripMenuItem.Enabled = true;
                    grayToolStripMenuItem.Enabled = true;
                    AbandonGrayStripMenuItem.Enabled = true;
                    if (0 <= m_MouseMoveImageX && m_MouseMoveImageX <= 1024)
                    {
                        contextMenuStrip1.Items[(int)MeasureStateMenuType.PointScanElementMenuItem].Enabled = true;
                    }
                    else
                    {
                        contextMenuStrip1.Items[(int)MeasureStateMenuType.PointScanElementMenuItem].Enabled = false;
                    }
                    if (!MenuItemLineScam.Checked)
                    {
                        contextMenuStrip1.Items[(int)MeasureStateMenuType.PointScanElementMenuItem].Enabled = true;
                        bool showExprot = m_ElementPointGDIObjects.Count > 0 ? true : false;
                        if (showExprot)
                        {
                            contextMenuStrip1.Items[(int)MeasureStateMenuType.ExportReport].Enabled = true;
                        }
                    }
                    else
                    {
                        contextMenuStrip1.Items[(int)MeasureStateMenuType.PointScanElementMenuItem].Enabled = false;
                        contextMenuStrip1.Items[(int)MeasureStateMenuType.ExportReport].Enabled = false;
                        return;
                    }
                    if (myChart.Visible)
                    {
                        MenuItemLineScam.Enabled = false;
                        contextMenuStrip1.Items[(int)MeasureStateMenuType.PointScanElementMenuItem].Enabled = false;
                        contextMenuStrip1.Items[(int)MeasureStateMenuType.ExportReport].Enabled = false;
                    }
                    else
                    {
                        MenuItemLineScam.Enabled = true;
                        contextMenuStrip1.Items[(int)MeasureStateMenuType.PointScanElementMenuItem].Enabled = true;
                        bool showExprot = m_ElementPointGDIObjects.Count > 0 ? true : false;
                        if (showExprot)
                        {
                            contextMenuStrip1.Items[(int)MeasureStateMenuType.ExportReport].Enabled = true;
                        }
                    }
                    //根据去背景方式 设置可视化使用状态
                    COTSSample WSample = m_MeasureAppForm.m_ProjData.GetWorkingSample();
                    COTSImageProcParam ImgProcPrm = WSample.GetMsrParams().GetImageProcessParam();
                    if (ImgProcPrm.GetBGRemoveType() == otsdataconst.OTS_BGREMOVE_TYPE.MANUAL)
                    {
                        contextMenuStrip1.Items[(int)MeasureStateMenuType.SetVisualGray].Enabled = true;
                    }
                    else
                    {
                        contextMenuStrip1.Items[(int)MeasureStateMenuType.SetVisualGray].Enabled = false;
                    }
                }
                else
                {
                    ToolStripMenuItem.Enabled = false;
                    grayToolStripMenuItem.Enabled = false;
                    MenuItemLineScam.Enabled = false;
                    AbandonGrayStripMenuItem.Enabled = false;
                }
            }
            catch (Exception ex)
            {
                log.Error("(LZMeasureStatusWindow.contextMenuStrip1_Opened)  " + ex.ToString());
            }
        }

        //拖动灰度线
        #region 拖动灰度线 
        int LineX = 0;
        int LineXEnd = 0;
        public Point pointStart = new Point(100, 100);
        public Point pointEnd = new Point(400, 100);
        private bool m_bMouseDown = false;

        private void pictureBox1_Paint(object sender, PaintEventArgs e)
        {

            try
            {
                if (bfResult)
                {
                    if (MenuItemLineScam.Checked)
                    {
                        IsShowGrayLevelLine = true;
                        Rectangle rectangle = GetPictureBoxZoomSize(pbBSEImage);
                        if (pointStart.Equals(pointEnd))
                     
                        {
                            return;
                        }
                        Point start = new Point(100, pointStart.Y);
                        Point end = new Point(500, pointEnd.Y);
                        int lens = curvebuf.Length;

                        if (lens <= 1)
                        {
                            drawflag = 0;
                            MessageBox.Show(table["message22"].ToString(), table["message23"].ToString(), MessageBoxButtons.OK, MessageBoxIcon.Exclamation);
                        }
                        else
                        {
                            drawflag = 1;
                            //Y值
                            double rate = (double)pbBSEImage.Image.Height / (double)rectangle.Height;
                            int YSize = Convert.ToInt32((rate * (double)pointStart.Y));
                            //显示线扫描 黄色线的曲线数据
                            GetLineImage(YSize, m_iWidth, ref Imagedata);
                            DrawCurve(Imagedata, e);
                        }
                        e.Graphics.DrawLine(new Pen(Color.Red), new Point(rectangle.X, rectangle.Y + (rectangle.Height) / 4), new Point(rectangle.X + rectangle.Width, rectangle.Y + (rectangle.Height) / 4));
                        e.Graphics.DrawLine(new Pen(Color.Red), new Point(rectangle.X, rectangle.Y + rectangle.Height * 3 / 4), new Point(rectangle.X + rectangle.Width, rectangle.Y + rectangle.Height * 3 / 4));
                        e.Graphics.DrawLine(new Pen(Color.Blue), new Point(rectangle.X, pointStart.Y), new Point(rectangle.X + rectangle.Width, pointEnd.Y));

                        #region 绘制刻度条
                        float offHeight = (rectangle.Y + (rectangle.Height) / 4) - (rectangle.Y + rectangle.Height * 3 / 4);
                        float grayValue = Math.Abs(offHeight / 255);
                        //设置文字对齐方式
                        StringFormat sf = new StringFormat();
                        sf.Alignment = StringAlignment.Center;
                        sf.LineAlignment = StringAlignment.Center;
                        SolidBrush solidBrush = new SolidBrush(Color.FromArgb(100, Color.Red));
                        //字体大小 根据样品孔Rectangle大小
                        float fontSize = 15;
                        Font font = new Font("黑体", fontSize, FontStyle.Bold);

                        Pen pen = new Pen(Color.Red, 1);
                        pen.DashStyle = System.Drawing.Drawing2D.DashStyle.Custom;
                        pen.DashPattern = new float[] { 5, 5 };
                        int fontOffWidth = 50;
                        int fontOffHeight = 10;
                        
                        int scaleLine = 0;
                        for (int i = 25; i <= 225; i+=25)
                        {
                            scaleLine = (int)(grayValue * i);
                            e.Graphics.DrawLine(pen, new Point(rectangle.X, (rectangle.Y + rectangle.Height * 3 / 4) - scaleLine), new Point(rectangle.X + fontOffWidth, (rectangle.Y + rectangle.Height * 3 / 4) - scaleLine));
                            e.Graphics.DrawString(i.ToString(), font, solidBrush, rectangle.X + 20, (rectangle.Y + rectangle.Height * 3 / 4) - scaleLine - fontOffHeight, sf);
                        }
                        #endregion
                    }
                    else
                    {
                        IsShowGrayLevelLine = false;
                    }
                }
                if (!MenuItemLineScam.Checked)
                {
                    if (m_ElementPointGDIObjects != null)
                    {

                        if (m_ElementPointGDIObjects.Count > 0)
                        {
                            //绘制采集点标记
                            foreach (ARectangleGDIObject item in m_ElementPointGDIObjects)
                            {
                                if (item != null)
                                {
                                    item.OnPaint(e);
                                }
                            }
                        }
                    }
                }
            }
            catch (Exception ex)
            {

                log.Error("(LZMeasureStatusWindow.pictureBox1_Paint)  " + ex.ToString());
            }
        }
        private void pictureBox1_MouseMove(object sender, MouseEventArgs e)
        {
            try
            {
                //如果pictureBox1中没有图像 则return退出
                if (pbBSEImage.Image == null)
                {
                    return;
                }
                Control lCtrl = (sender as Control);
                Rectangle rectangle = GetPictureBoxZoomSize(pbBSEImage);
                int startimageX = 0;
                int startimageY = 0;
                //处理灰度值
                int grayValue = 0;
                // 生成鼠标的位置
                int MouseLine = e.X;

                //当前鼠标所在图片中的位置
                int imageX = 0;
                int imageY = 0;
                //当前pictrueBox与实际图片的X、Y比例
                double rateX = 0;
                double rateY = 0;
                if (bBseData != null)
                {
                    if ((pbBSEImage.Width - rectangle.Width) / 2 < e.X && e.X < (pbBSEImage.Width - rectangle.Width) / 2 + rectangle.Width)
                    {
                        imageX = e.X - (pbBSEImage.Width - rectangle.Width) / 2;
                        rateX = (double)m_iWidth / (double)rectangle.Width;
                        startimageX = Convert.ToInt32(imageX * rateX);
                        m_MouseMoveImageX = startimageX;

                        if (MoveFlag)
                        {
                            pbBSEImage.Left += Convert.ToInt32(e.X - xPos);//设置x坐标.
                            pbBSEImage.Top += Convert.ToInt32(e.Y - yPos);//设置y坐标.
                        }
                    }
                    else
                    {
                        startimageX = 0;
                        m_MouseMoveImageX = -1;
                    }
                    if ((pbBSEImage.Height - rectangle.Height) / 2 < e.Y && e.Y < (pbBSEImage.Height - rectangle.Height) / 2 + rectangle.Height)
                    {
                        imageY = e.Y - (pbBSEImage.Height - rectangle.Height) / 2;
                        rateY = (double)m_iHeight / (double)rectangle.Height;
                        startimageY = Convert.ToInt32(imageY * rateY);
                        m_MouseMoveImageY = startimageY;
                    }
                    //如果当前鼠标在图像Y轴中
                    if (imageX > 0 && imageY > 0)
                    {
                        if (imageY > 1)
                        {
                            startimageX = startimageX + (startimageY * m_iWidth);
                            if (IsShowImageType == ImageType.BSEImage)
                            {
                                grayValue = bBseData[startimageX];
                            }
                            else
                            {
                                grayValue = cBseData[startimageX];
                            }
                        }
                        else if (startimageY == 1)
                        {
                            if (IsShowImageType == ImageType.BSEImage)
                            {
                                grayValue = bBseData[startimageX];
                            }
                            else
                            {
                                grayValue = cBseData[startimageX];
                            }
                        }
                    }
                    else
                    {
                        grayValue = 0;
                    }
                }
                LineX = rectangle.X + 1;
                LineXEnd = rectangle.X + rectangle.Width;
                if (LineX < MouseLine && MouseLine < LineXEnd)
                {
                    if (MenuItemLineScam.Checked)
                    {
                        if (Math.Abs(e.Y - pointStart.Y) < 2)
                        {
                            this.Cursor = Cursors.SizeNS;
                        }
                        else
                        {
                            this.Cursor = Cursors.Default;
                        }
                    }
                }

                //Y值
                double rate = (double)pbBSEImage.Image.Height / (double)rectangle.Height;
                int YSize = Convert.ToInt32((rate * (double)e.Y));
                //显示线扫描 黄色线的曲线数据
                GetLineImage(YSize, m_iWidth, ref Imagedata);
                string strGrayValue = grayValue.ToString();
                switch (strGrayValue.ToString().Length)
                {
                    case 1:
                        strGrayValue = "  " + grayValue.ToString();
                        break;
                    case 2:
                        strGrayValue = " " + grayValue.ToString();
                        break;
                }
                //此处调接口显示灰度值
                m_MeasureAppForm.ShowGrayVal(strGrayValue.ToString());
                if (!IsShowGrayLevelLine)
                {
                    if (m_ElementPointGDIObjects != null)
                    {
                        if (m_ElementPointGDIObjects.Count > 0)
                        {
                            foreach (var item in m_ElementPointGDIObjects)
                            {
                                Rectangle rect = new Rectangle(e.Location, new Size(1, 1));
                                if (Math.Abs(e.Y - item.DrawRegionF.Y) < 5 && Math.Abs(e.X - item.DrawRegionF.X) < 5)
                                {
                                    //设置鼠标样式
                                    this.Cursor = Cursors.Hand;
                                }
                                else
                                {
                                    this.Cursor = Cursors.Default;
                                }
                            }
                        }
                    }
                }
                if (e.Button != MouseButtons.Left)
                {
                    return;
                }
                pointStart = new Point(pointStart.X, e.Y);
                pointEnd = new Point(pointEnd.X, e.Y);

                pbBSEImage.Refresh();
            }
            catch (Exception ex)
            {

                log.Error("(LZMeasureStatusWindow.pictureBox1_MouseMove)  " + ex.ToString());
            }
        }

        private void pictureBox1_MouseDown(object sender, MouseEventArgs e)
        {
            try
            {
                m_mouseCurrentPoint = e.Location;
                if (e.Button != MouseButtons.Left)
                {
                    return;
                }
                m_bMouseDown = !m_bMouseDown;
            }
            catch (Exception ex)
            {
                log.Error("(LZMeasureStatusWindow.pictureBox1_MouseDown)  " + ex.ToString());
            }
        }
        #endregion
        //显示去背景BSE图得灰度曲线值
        #region 显示去背景BSE图得灰度曲线值
        private void ShowAbandonGrayLevelImage_Click(object sender, EventArgs e)
        {
            //设置右键菜单中的项 是否可编辑
            SetContextMenuEnabled(false);
            ShowAbandonGrayLevelImage();
            myChart.Visible = true;
            panelXray.Visible = false;
            IsShowGrayLevelLine = false;
        }
        protected void ShowAbandonGrayLevelImage()
        {
            try
            {
                imagetype = ImageType.GrayAbandonLevelChart;
                COTSSample WSample = m_MeasureAppForm.m_ProjData.GetWorkingSample();
                bool bfResult = m_ImageData.ShowRemoveBGImage(WSample,m_iWidth, m_iHeight, bBseData, ref cBseData);
                if (bfResult)
                {
                    dGrayAbandonLevelData = new double[(int)GrayLevel.Max];
                    m_ImageData.GetGrayAbandonData(cBseData, dGrayAbandonLevelData);
                    //计算灰度去背景最大值
                    dGrayAbandonLevelMax = dGrayAbandonLevelData[0];
                    for (int i = 0; i < (int)GrayLevel.Max; i++)
                    {

                        dGrayAbandonLevelMax = Math.Max(dGrayAbandonLevelMax, dGrayAbandonLevelData[i]);

                    }
                }
        
                pbBSEImage.Hide();

                m_ImageData.Line = idLine.GrayImage;
                //切换显示至BSE图
                contextMenuStrip1.Items[(int)MeasureStateMenuType.ChangeDiffImageShow].Enabled = true;
                contextMenuStrip1.Items[(int)MeasureStateMenuType.ChangeDiffImageShow].Enabled = true;
                if (OTSSysMgrTools.Language.ReadDefaultLanguage() == "ZH")
                {
                    contextMenuStrip1.Items[(int)MeasureStateMenuType.ChangeDiffImageShow].Text = "切换显示至BSE图";
                }
                else
                {
                    contextMenuStrip1.Items[(int)MeasureStateMenuType.ChangeDiffImageShow].Text = "SwitchDisplayToBSEDiagram";
                }
                
                UpdataImageChart();

                int[] XData = new int[(int)GrayLevel.Max];
                for (int i = 0; i < (int)GrayLevel.Max; i++)
                {
                    XData[i] = i + 1;
                }
                int[] YData = new int[dGrayAbandonLevelData.Length];
                for (int i = 0; i < dGrayAbandonLevelData.Length; i++)
                {
                    YData[i] = (int)dGrayAbandonLevelData[i];
                }
                chartData(XData, YData);

            }
            catch (Exception ex)
            {
                log.Error("(LZMeasureStatusWindow.ShowAbandonGrayLevelImage_Click)  " + ex.ToString());
            }
        }
        #endregion

        private void pictureBox1_MouseClick(object sender, MouseEventArgs e)
        {
            try
            {
                if (e.Button == MouseButtons.Right && e.Clicks == 1)
                {
                    int XMenu = pbBSEImage.Left + e.Location.X;
                    int YMenu = pbBSEImage.Top + e.Location.Y;
                    Point mousePoint = new Point(XMenu, YMenu);
                    contextMenuStrip1.Show(PointToScreen(mousePoint));
                    //电镜位置信息
                    Point semLocatin = new Point((int)dPositionX, (int)dPositionY);
                    Rectangle semRect = new Rectangle();
                    if (IsSEMLocationOnTheSampleStage(semLocatin, ref semRect))
                    {
                        SetContentMenu();
                    }
                    if (m_MeasureAppForm.MeasureThreadRunFlag)
                    {
                        foreach (ToolStripItem item in contextMenuStrip1.Items)
                        {
                            item.Enabled = false;
                        }
                    }
                }
            }
            catch (Exception ex)
            {
                log.Error("(LZMeasureStatusWindow.pictureBox1_MouseClick)  " + ex.ToString());
            }
        }

        private void ChangeDiffImageShow_Click(object sender, EventArgs e)
        {
            //设置右键菜单中的项 是否可编辑
            SetContextMenuEnabled(true);
            //显示切换至BSE图
            if (contextMenuStrip1.Items[(int)MeasureStateMenuType.ChangeDiffImageShow].Text == "切换显示至BSE图"|| contextMenuStrip1.Items[(int)MeasureStateMenuType.ChangeDiffImageShow].Text == "SwitchDisplayToBSEDiagram")
            {
                contextMenuStrip1.Items[(int)MeasureStateMenuType.ChangeDiffImageShow].Enabled = true;

                if (OTSSysMgrTools.Language.ReadDefaultLanguage() == "ZH")
                {
                    contextMenuStrip1.Items[(int)MeasureStateMenuType.ChangeDiffImageShow].Text = "切换显示至BSE去背景图";
                }
                else
                {
                    contextMenuStrip1.Items[(int)MeasureStateMenuType.ChangeDiffImageShow].Text = "SwitchDisplayToBSEBackgroundImage";
                }

                //显示BSE图
                if (bBseData != null)
                {
                    //用于线扫描曲线
                    IsShowImageType = ImageType.BSEImage;
                    imagetype = ImageType.BSEImage;
                    //在控件中显示图像
                    ShowImage(m_iWidth, m_iHeight, bBseData);
                    pbBSEImage.Show();
                    //panel1.Visible = false;
                }
            }
            else if (contextMenuStrip1.Items[(int)MeasureStateMenuType.ChangeDiffImageShow].Text == "切换显示至BSE去背景图"|| contextMenuStrip1.Items[(int)MeasureStateMenuType.ChangeDiffImageShow].Text == "SwitchDisplayToBSEBackgroundImage")
            {
                contextMenuStrip1.Items[(int)MeasureStateMenuType.ChangeDiffImageShow].Enabled = true;
                if (OTSSysMgrTools.Language.ReadDefaultLanguage() == "ZH")
                {
                    contextMenuStrip1.Items[(int)MeasureStateMenuType.ChangeDiffImageShow].Text = "切换显示至BSE图";
                }
                else
                {
                    contextMenuStrip1.Items[(int)MeasureStateMenuType.ChangeDiffImageShow].Text = "SwitchDisplayToBSEDiagram";
                }
                
                //显示去背景BSE图
                if (bBseData != null)
                {
                    //用于线扫描曲线
                    IsShowImageType = ImageType.RemoveBGImage;
                    imagetype = ImageType.RemoveBGImage;
                    ShowImage(m_iWidth, m_iHeight, cBseData);
                    //panel1.Visible = false;
                    pbBSEImage.Show();
                }
            }
            myChart.Visible = false;
            UpdataImageChart();
            GetLineImage(YSize, m_iWidth, ref Imagedata);
            m_CurrentMultiple = 0;
            panelXray.Visible = false;
        }

        #region 显示鼠标位置
        /// <summary>
        /// 显示鼠标位置
        /// </summary>
        /// <param name="eMouseLocation">当前处理后的鼠标路径 减去边缘</param>
        /// <param name="imageRect">Pictrue中的图像尺寸与位置</param>
        public void ShowMouseSEMCurrentLocation(Point eMouseLocation, Rectangle imageRect, Rectangle semRect)
        {
            //真实图像中心点
            Point imgRealCenterPoint = new Point();
            //显示图像中心点
            Point imgCenterPoint = new Point();
            int imgWidth = 0;
            int imgHeight = 0;
            //获取真实图片的分辨率
            m_MeasureAppForm.m_ProjParam.GetBSEImageSize(ref imgWidth, ref imgHeight);
            //根据真实图像的像素 获取真实图像中心点
            imgRealCenterPoint.X = imgWidth / 2;
            imgRealCenterPoint.Y = imgHeight / 2;
            //图像与真是图像的宽高的比例
            double witdhRote = 0;
            double heightRote = 0;
            //获取显示图像与真是图像的宽高的比例
            witdhRote = (double)imageRect.Width / imgWidth;
            heightRote = (double)imageRect.Height / imgHeight;
            //获取每个单位中包含多少像素 根据帧图的长度 与 真实图像的长度计算 
            double lenghtInPixWidth = (double)FieldWitdh / imgWidth / witdhRote;
            double lenghtInPixHeight = (double)FieldHeight / imgHeight / heightRote;
            //通过鼠标当前位置 获取位置 原点为控件的左上角起始点
            double MouseWidth = (double)eMouseLocation.X * lenghtInPixWidth;
            double MouseHeight = (double)eMouseLocation.Y * lenghtInPixHeight;
            //根据显示图像的像素 获取真实图像中心点
            imgCenterPoint.X = imageRect.Width / 2;
            imgCenterPoint.Y = imageRect.Height / 2;
            //通过鼠标当前位置 获取位置 原点为控件的左上角起始点
            double imgCenterWidth = (double)imgCenterPoint.X * lenghtInPixWidth;
            double imgCenterHeight = (double)imgCenterPoint.Y * lenghtInPixHeight;
            //获取当前鼠标坐标与SEM当前坐标的距离 单位毫米
            double apartCenterPointWidth = MouseWidth - imgCenterWidth;
            double apartCenterPointHeight = MouseHeight - imgCenterHeight;
            //将微米转换为毫米
            float mousePointX = Convert.ToSingle((apartCenterPointWidth / 1000).ToString("F3"));
            float mousePointY = Convert.ToSingle((apartCenterPointHeight / 1000).ToString("F3"));
            //根据Sem电镜当前位置 计算与SEM坐标起始点相差的距离
            //1.获取电镜当前位置
            double semX = dPositionX;
            double semY = dPositionY;
            //2.获取当前电镜位置与SEM原点位置的距离
            string apartToSEMWidth = Convert.ToSingle(semX + mousePointX).ToString("F3");
            string apartToSEMHeight = Convert.ToSingle(semY - mousePointY).ToString("F3");
            //编辑显示内容
            string STSemCoordinate = "X:" + apartToSEMWidth + "|Y:" + apartToSEMHeight + "";
            //显示XY轴
            //m_MeasureAppForm.ShowSemCoordvAL(STSemCoordinate);
        }
        #endregion

        #region 设置测量状态初始化
        /// <summary>
        /// 设置测量状态初始化
        /// </summary>
        public void SetMeasureStatusInit()
        {
            //panel1.Hide();
            //panel1.Visible = false;
            pbBSEImage.Hide();
            foreach (ToolStripItem item in contextMenuStrip1.Items)
            {
                if (item != contextMenuStrip1.Items[(int)MeasureStateMenuType.SampleParaLock])
                {
                    item.Enabled = false;
                }
            }
        }
        #endregion

        #region 获取SEM当前位置
        public void GetSEMLocation(ref double dPositionX, ref double dPositionY, ref double dPositionR)
        {
            try
            {
                //获取SEM当前位置
                m_ImageData.GetSemPositionXY(ref dPositionX, ref dPositionY, ref dPositionR);
            }
            catch (Exception ex)
            {
                
                MessageBox.Show(table["message24"].ToString() + ex.ToString());
            }
        }
        #endregion

     
       


        #region 鼠标是否在图像上移动
        /// <summary>
        /// 鼠标是否在图像上移动
        /// </summary>
        /// <param name="mouseCurrentLocation"></param>
        /// <param name="picBox"></param>
        /// <returns></returns>
        public bool IsOnTheImage(Point mouseCurrentLocation, PictureBox picBox, ref Point mouseLocation, ref Rectangle imageRect)
        {
            //通过Pictrue获取图像尺寸位置
            Rectangle rectangle = GetPictureBoxZoomSize(picBox);
            imageRect = rectangle;
            //当前鼠标坐标是否包含在图像中
            bool result = imageRect.Contains(mouseCurrentLocation);
            if (result)
            {
                //获取与边框的间隔
                mouseLocation.X = mouseCurrentLocation.X - rectangle.X;
                mouseLocation.Y = mouseCurrentLocation.Y;
                return true;
            }
            return false;
        }
        #endregion

        #region 判断当前电镜位置是否在样品台内部
        /// <summary>
        /// 判断当前电镜位置是否在样品台内部
        /// </summary>
        /// <param name="semLocation">电镜当前位置</param>
        /// <param name="SampleStage">样品台尺寸与位置</param>
        /// <returns></returns>
        public bool IsSEMLocationOnTheSampleStage(Point semLocation, ref Rectangle semRect)
        {
            //获取样品台信息
            StageDrawingData SData = m_MeasureAppForm.m_SamplepaceWindow.m_OTSSampleStageData;
            string stageName = SData.sStageName;
            int widthDomain = 0;
            int heightDomain = 0;
            //获取样品台
            int StageShape = SData.bStageShape;

            ValueType XDomain = new Point(SData.StageDomain.Left, SData.StageDomain.Top);
            ValueType YDomain = new Point(SData.StageDomain.Right, SData.StageDomain.Bottom);
            //转换类型
            Point xDomain = ((System.Drawing.Point)XDomain);
            Point yDomain = ((System.Drawing.Point)YDomain);
            //宽度
            widthDomain = Math.Abs(((Point)yDomain).X - ((Point)xDomain).X);
            heightDomain = Math.Abs(((Point)yDomain).Y - ((Point)xDomain).Y);
            //设置样品台宽度
            int wDomain = widthDomain;
            int IsWidth = this.Height > this.Width ? 0 : 1;
            int Shape = SData.bStageShape;
            CreateRectangle CreateBourary = null;
            //0:区域圆形 1:区域矩形 2：文字 
            if (SData.bStageShape == (int)CreateRectangleType.Rectangle)
            {
                CreateBourary = OTSSamplespaceGraphicsPanelFun.GetPixRect(widthDomain, xDomain, yDomain, (int)CreateRectangleType.Rectangle, "", "", IsWidth, this.Width, this.Height);
            }
            else
            {
                CreateBourary = OTSSamplespaceGraphicsPanelFun.GetPixRect(widthDomain, xDomain, yDomain, (int)CreateRectangleType.SampleBackGround_CirCle, "", "", IsWidth, this.Width, this.Height);

            }
            //获取SEM位置
            CreateRectangle semRectangle = OTSSamplespaceGraphicsPanelFun.GetPixRect(widthDomain, semLocation, semLocation, (int)CreateRectangleType.Rectangle, "", "", IsWidth, this.Width, this.Height);
            semRect = semRectangle.Region;
            return CreateBourary.Region.Contains(semRectangle.Region.Location);
        }
        #endregion

        #region 设置右键菜单项是否可用
        /// <summary>
        /// 设置右键菜单项是否可用
        /// </summary>
        public void SetContentMenu()
        {
            int sampleCount = m_MeasureAppForm.m_ProjParam.GetSampleCount();
            if (sampleCount == 0)
            {
                foreach (ToolStripItem item in contextMenuStrip1.Items)
                {
                    item.Enabled = false;
                }
            }
            else
            {
                contextMenuStrip1.Items[(int)MeasureStateMenuType.SampleParaLock].Enabled = true;
            }
        }
        #endregion
        #region 获取线扫描初始位置
        public void GetYSize()
        {
            Rectangle rectangle = GetPictureBoxZoomSize(pbBSEImage);
            double rate = (double)pbBSEImage.Image.Height / (double)rectangle.Height;
            YSize = Convert.ToInt32((rate * (double)pointStart.Y));
        }
        #endregion

        public void chartData(int[] XData, int[] YData)
        {
            //添加数据
            myChart.Series[0].Points.DataBindXY(XData, YData);
            myChart.Series[0].Label = "";
            myChart.Series[0].LegendText = "";
            if (OTSSysMgrTools.Language.ReadDefaultLanguage() == "ZH")
            {
                myChart.Series[0].Name = "曲线图";
            }
            else
            {
                myChart.Series[0].Name = "Graph";
            }
            myChart.Series[0].IsVisibleInLegend = false;
            switch (imagetype)
            {
                case ImageType.GrayLevelChart:
                    if (OTSSysMgrTools.Language.ReadDefaultLanguage() == "ZH")
                    {
                        myChart.Titles[0].Text = "灰度曲线图";
                    }
                    else
                    {
                        myChart.Titles[0].Text = "B-GrayCurve";
                    }
                    break;
                case ImageType.GrayAbandonLevelChart:
                    if (OTSSysMgrTools.Language.ReadDefaultLanguage() == "ZH")
                    {
                        myChart.Titles[0].Text = "去背景灰度曲线图";
                    }
                    else
                    {
                        myChart.Titles[0].Text = "Background-freeGray-scaleCurve";
                    }
                    break;
                default:
                    myChart.Titles[0].Text = "";
                    break;
            }
        }
        //[Serializable]
        //public class ShowElementInfo
        //{
        //    public string ElementName;
        //    public double Percentage;//实际能谱返回的质量百分比
        //    public double dKF;//K峰,元素周期表中固定值
        //}
        private void PointScanElementMenuItem_Click(object sender, EventArgs e)
        {
            MenuItemLineScam.Checked = false;
            //电镜设置对象
            //控制类对象初始化
            COTSControlFunExport cfun = new COTSControlFunExport();
            //1.连接电镜
            if (cfun.ConncetSem())
            {
                bool initResult = false;
                //线程调用 加载
                initResult = cfun.EDSInit();
                if (initResult)
                {
                    COTSMsrPrjResultData cProjMgr = m_MeasureAppForm.m_ProjParam.m_ResultData;
                    //获取工作样品对象
                    COTSSample sampleClr = cProjMgr.GetWorkingSample();

                    //清空之前记录的标识
                    if (m_ElementPointGDIObjects != null)
                    {
                        if (m_ElementPointGDIObjects.Count > 0)
                        {
                            //清空
                            m_ElementPointGDIObjects.Clear();
                        }
                    }
                    //2.获取鼠标在图像的位置
                    dMouseImgX = m_MouseMoveImageX;
                    dMouseImgY = m_MouseMoveImageY;
                    //3.根据所要扫描的位置进行元素分析
                    uint a_Milliseconds = 0;
                    //采集时间
                    a_Milliseconds = Convert.ToUInt32(sampleClr.GetMsrParams().GetXRayParam().GetMidAnalyAQTime());
                    //元素数量
                    ValueType a_nElementNum = 0;
                    //元素名称
                    string a_strElementName = "";
                    //元素Xray数据
                    uint[] a_ElementXrayData = new uint[2000];
                    if (cfun.GetXRayAndElements(a_Milliseconds, (int)dMouseImgX, (int)dMouseImgY, ref a_ElementXrayData, ref a_nElementNum, ref a_strElementName))
                    {
                        log.Trace("--获取单点扫描数据:元素数量：'" + a_nElementNum + "' ，元素名称：'" + a_strElementName + "'--");
                        //4.在BSE上绘制扫描标记
                        //4-1 获取鼠标在BSE图上的位置
                        Point p_mouseCurrentTempPoint = m_mouseCurrentPoint;
                        //4-2 根据位置绘制标记
                        Point ImgPoint = new Point((int)dMouseImgX, (int)dMouseImgY);
                        Rectangle rect = new Rectangle(p_mouseCurrentTempPoint, new Size(1, 1));
                        CreateRectangle createRect = new CreateRectangle(rect, ImgPoint, m_CurrentMultiple, (int)CreateRectangleType.DrawBSEElementSignPoint);
                        m_ElementPointGDIObjects.Add(createRect);
                        //5.获取成功后弹出对话框
                        //计数率
                        double electronicCount = 0;
                        uint[] u_ElementXrayData = new uint[2000];
                        for (int i = 0; i < a_ElementXrayData.Length; i++)
                        {
                            u_ElementXrayData[i] = (uint)a_ElementXrayData[i];
                            //累加计数率
                            electronicCount += a_ElementXrayData[i];
                        }
                        //显示Xray控件
                        panelXray.Visible = true;
                        //获取数据后，需要对xraytable设置

                        string[] strGroup = a_strElementName.Split('\n');
                        //get CElementChemistryClr list
                        List<ShowElementInfo> list_showelementinfo = new List<ShowElementInfo>();
                        for (int i = 0; i < strGroup.Length; i++)
                        {
                            if (!strGroup[i].Equals(""))
                            {
                                ShowElementInfo ls_sei = new ShowElementInfo();
                                ls_sei.ElementName = strGroup[i].Split(':')[0];
                                ls_sei.Percentage = Convert.ToDouble(strGroup[i].Split(':')[1]);
                                list_showelementinfo.Add(ls_sei);
                            }
                        }
                        //设置分析Xray数据
                        control_XRayTable1.SetXRayShowLineValue(new uint[2000], u_ElementXrayData, list_showelementinfo);
                        //需要显示计数率
                        string strElectronicCount = string.Empty;
                        if (electronicCount > 1000)
                        {
                            strElectronicCount = (Convert.ToDouble(electronicCount) / 1000).ToString("f2") + "kcps";
                        }
                        control_XRayTable1.List_ShowElementInfo = list_showelementinfo;

                    }
                    ExportScanInfoMenuItem.Enabled = true;
                    this.Invalidate();
                }


                try
                {
                    cfun.DisConnectSem();
                    cfun.FreeHardware();

                    
                    log.Trace("-------释放单击采集对象------");
                }
                catch (Exception)
                {
                }
            }
        }

        #region 根据夹杂物编号获取夹杂物名称
        public string GetInclusionName(int nInclusionID)
        {
            //获取使用标准库的名称,也许这个也不是很正确??
            string str_stdname = "";
            string str_IncALibName = "";
            COTSSample cSample = m_MeasureAppForm.m_ProjParam.m_ResultData.GetWorkingSample();
            if (nInclusionID < 1000)
            {
                //小于1000，使用系统默认分类
                str_IncALibName = "";
                str_stdname = "默认标准库";
            }
            else if (nInclusionID >= 1000 && nInclusionID < 10000)
            {
                //大于等于1000，并且小于10000时，使用系统数据库中夹杂物来分析
                str_IncALibName = "";
                str_stdname = "用户定义标准库";
            }
            else if (nInclusionID > 10000)
            {
                //查询数据中的化合物名称
                SQliteManageClass sQliteManageClass = new SQliteManageClass();
                str_IncALibName = sQliteManageClass.GetNameByIncAId(nInclusionID.ToString());
                //大于10000时，使用用户标准库来分析夹杂物名称
                if (str_stdname == "")
                    str_stdname = "系统标准库";
            }
            return str_IncALibName;
        }
        #endregion

        public void DelElementPointGDIObjects()
        {
            if (m_ElementPointGDIObjects != null)
            {
                if (m_ElementPointGDIObjects.Count > 0)
                {
                    //删除点标记
                    m_ElementPointGDIObjects.Clear();
                    this.Invalidate();
                }
            }
        }

        private void ExportScanInfoMenuItem_Click(object sender, EventArgs e)
        {
            try
            {
                //导出图片到报告中
                ExportReport();
            }
            catch (Exception ex)
            {
                log.Error("ExportScanInfoMenuItem_Click：保存图片错误日志： " + ex.ToString());
            }
        }
        /// <summary>
        /// 导出Image到报告
        /// </summary>
        private bool ExportReport()
        {
            string startupPath = System.Windows.Forms.Application.StartupPath + "\\TempReport\\";
            if (!Directory.Exists(startupPath))
            {
                Directory.CreateDirectory(startupPath);
            }
            //保存Xray图片
            string ImgFilePath = startupPath + DateTime.Now.ToString("yyyyMMddHHmmssfff") + ".jpg";
            Bitmap bseBM = new Bitmap(this.pbBSEImage.Width, this.pbBSEImage.Height);
            this.pbBSEImage.DrawToBitmap(bseBM, new Rectangle(0, 0, this.pbBSEImage.Width, this.pbBSEImage.Height));
            //保存图片
            bseBM.Save(ImgFilePath, System.Drawing.Imaging.ImageFormat.Jpeg);
            //释放资源
            bseBM.Dispose();
            //保存Xray图片
            string ImgXrayFilePath = startupPath + DateTime.Now.ToString("yyyyMMddHHmmssfff") + ".jpg";
            int xrayWidth = control_XRayTable1.Width;
            int xrayHeight = control_XRayTable1.Height;
            Bitmap xrayBM = new Bitmap(xrayWidth, xrayHeight);
            this.control_XRayTable1.DrawToBitmap(xrayBM, new Rectangle(0, 0, xrayWidth, xrayHeight));

            //保存图片
            xrayBM.Save(ImgXrayFilePath, System.Drawing.Imaging.ImageFormat.Jpeg);
            //释放资源
            xrayBM.Dispose();

            List<string> listFilePath = new List<string>();
            listFilePath.Add(ImgFilePath);
            listFilePath.Add(ImgXrayFilePath);

            List<ShowElementInfo> list_ElementInfo = control_XRayTable1.List_ShowElementInfo;
            //1.编辑信息
            DataTable dt = new DataTable();
            dt.Columns.Add("元素名称");
            dt.Columns.Add("原子数");
            dt.Columns.Add("质量百分比");
            dt.Columns.Add("摩尔比");
            foreach (var item in list_ElementInfo)
            {
                //获取摩尔比与原子数
                CElementChemistry cElementChemistry = new CElementChemistry();
                cElementChemistry.SetName(item.ElementName);
                cElementChemistry.SetPercentage(item.Percentage);
                double molarValue = Math.Round(cElementChemistry.GetMolarPercentage(), 2);
                int atomNum = (int)CElement.GetAtomicNum(item.ElementName);
                DataRow dr = dt.NewRow();
                dr[0] = item.ElementName;
                dr[1] = atomNum;
                dr[2] = item.Percentage;
                dr[3] = molarValue;
                dt.Rows.Add(dr);
            }
            DataGridView dgv = new DataGridView();
            dgv.DataSource = dt.DefaultView;
            List<DataTable> list_ElementData = new List<DataTable>();
            list_ElementData.Add(dt);
            //将数据插入Excel中
            return m_ImageData.InsertDataToExcelTable(list_ElementData, startupPath, listFilePath);
        }

        public void HideXRayTable()
        {
            panelXray.Visible = false;
            //清空元素标记对象
            if (m_ElementPointGDIObjects != null)
            {
                if (m_ElementPointGDIObjects.Count > 0)
                {
                    m_ElementPointGDIObjects.Clear();
                }
            }
        }


        //在picturebox的鼠标按下事件里,记录三个变量.
        int xPos;
        int yPos;
        bool MoveFlag = false;
        private void pbBSEImage_MouseDown(object sender, System.Windows.Forms.MouseEventArgs e)
        {
            if (e.Button == MouseButtons.Left)
            {
                //在线扫描未选中的情况下 设置移动标识与获取当前鼠标位置
                if (!((System.Windows.Forms.ToolStripMenuItem)contextMenuStrip1.Items[(int)MeasureStateMenuType.MenuItemLineScam]).Checked)
                {
                    MoveFlag = true;//已经按下.
                    xPos = e.X;//当前x坐标.
                    yPos = e.Y;//当前y坐标.
                }
            }
        }

        //在picturebox的鼠标按下事件里.
        private void pbBSEImage_MouseUp(object sender, MouseEventArgs e)
        {
            //dMouseImgX = e.X;//当前x坐标移动后的位置.
            //dMouseImgY = e.Y;//当前y坐标移动后的位置.
            int moveX = e.X - xPos;
            int moveY = e.Y - yPos;
            MoveFlag = false;
        }

        //在picturebox鼠标移动
        private void pbBSEImage_MouseMove(object sender, MouseEventArgs e)
        {
            if (MoveFlag)
            {
                pbBSEImage.Left = Convert.ToInt32(e.X - xPos);//设置x坐标.
                pbBSEImage.Top = Convert.ToInt32(e.Y - yPos);//设置y坐标.
            }
        }
        //在picturebox鼠标缩放
        private void pbBSEImage_MouseWheel(object sender, MouseEventArgs e)
        {
            //鼠标滚动缩放 BSE图
            if (e.Delta > 0)
            {
                if (m_CurrentMultiple < m_MaxMultipleRange)
                {
                    m_CurrentMultiple += Convert.ToSingle(m_Multiple.ToString("f2"));
                    pbBSEImage.Width += Convert.ToInt32(m_iWidth * m_Multiple);
                    pbBSEImage.Height += Convert.ToInt32(m_iHeight * m_Multiple);
                    WheelElementPointGDIObjects(m_CurrentMultiple);
                }
            }
            else
            {
                m_CurrentMultiple -= Convert.ToSingle(m_Multiple.ToString("f2"));
                if (m_CurrentMultiple > 0)
                {
                    pbBSEImage.Width -= Convert.ToInt32(m_iWidth * m_Multiple);
                    pbBSEImage.Height -= Convert.ToInt32(m_iHeight * m_Multiple);
                }
                else
                {
                    m_CurrentMultiple = 0;
                    //pbBSEImage.Height = this.RestoreBounds.Height;
                    //pbBSEImage.Width = this.RestoreBounds.Width;
                    pbBSEImage.Height = this.RestoreBounds.Height;
                    pbBSEImage.Width = this.RestoreBounds.Height * 4 / 3;
                    pbBSEImage.Left = 0;
                    pbBSEImage.Top = 0;
                    Rectangle rectangle = GetPictureBoxZoomSize(pbBSEImage);
                    Point sizeChangePoint = rectangle.Location;
                    //修改窗体宽度后，设置单点采集的位置
                    if (m_ElementPointGDIObjects != null)
                    {
                        if (m_ElementPointGDIObjects.Count > 0)
                        {
                            if (m_GetBSEImageInitPoint != sizeChangePoint)
                            {
                                int sizeChangeX = sizeChangePoint.X - m_GetBSEImageInitPoint.X;
                                int sizeChangeY = sizeChangePoint.Y - m_GetBSEImageInitPoint.Y;
                                RectangleF sizeChangeRectF = m_ElementPointGDIObjects[0].RegionF;
                                sizeChangeRectF.X = m_ElementPointGDIObjects[0].RegionF.X + sizeChangeX;
                                m_ElementPointGDIObjects[0].RegionF = sizeChangeRectF;
                                m_ElementPointGDIObjects[0].DrawRegionF = sizeChangeRectF;
                                m_GetBSEImageInitPoint = sizeChangePoint;
                            }
                        }
                    }
                }
                WheelElementPointGDIObjects(m_CurrentMultiple);
            }
        }
        /// <summary>
        /// 缩放时改变 单点标识位置
        /// </summary>
        /// <param name="m_CurrentMultiple"></param>
        public void WheelElementPointGDIObjects(float m_CurrentMultiple)
        {
            if (m_ElementPointGDIObjects.Count > 0)
            {
                foreach (ARectangleGDIObject item in m_ElementPointGDIObjects)
                {
                    RectangleF rectF = new RectangleF();
                    rectF.X = item.RegionF.X + Convert.ToSingle(dMouseImgX) * m_CurrentMultiple;
                    rectF.Y = item.RegionF.Y + Convert.ToSingle(dMouseImgY) * m_CurrentMultiple;
                    //改变位置
                    RectangleF elementPointRctF = new RectangleF();
                    elementPointRctF.X = rectF.X;
                    elementPointRctF.Y = rectF.Y;
                    item.DrawRegionF = elementPointRctF;
                }
            }
        }

        private void button1_Click(object sender, EventArgs e)
        {
            COTSSample cSample = m_MeasureAppForm.m_ProjParam.GetWorkSample();
            int start = cSample.GetMsrParams().GetImageProcessParam().GetBGGray().GetStart();
            int end = cSample.GetMsrParams().GetImageProcessParam().GetBGGray().GetEnd();
            Image bInput = pbBSEImage.Image;
            List<ColorMap> colorMapTemp = new List<ColorMap>();
            for (int i = start; i <= end; i++)
            {
                ColorMap colorMap = new ColorMap();
                string colorName = "#" + Color.FromArgb(i, i, i).Name.ToString();
                colorMap.OldColor = ColorTranslator.FromHtml(colorName);
                colorMap.NewColor = Color.Red;
                colorMapTemp.Add(colorMap);
            }
            Bitmap outBitmap = new Bitmap(bInput);
            //创建Graphics对象
            Graphics g = Graphics.FromImage(outBitmap);
            //生成的图像大小
            int width = bInput.Width;
            int height = bInput.Height;
            //编辑被着急图像所要显示的位置
            Rectangle DrawRect = new Rectangle(0, 0, 1024, 768);
            //编辑输出画布中着色的位置
            Rectangle ShowRect = new Rectangle(0, 0, 1024, 768);
            ImageAttributes attr = new ImageAttributes();
            attr.SetRemapTable(colorMapTemp.ToArray());
            //从输入图像中截图至临时图像中
            g.DrawImage(bInput, ShowRect, 0, 0, DrawRect.Width, DrawRect.Height, GraphicsUnit.Pixel, attr);
            pbBSEImage.Image = outBitmap;
        }

        private void OTSMeasureStatusWindow_MouseClick(object sender, MouseEventArgs e)
        {
            try
            {
                if (e.Button == MouseButtons.Right && e.Clicks == 1)
                {
                    contextMenuStrip1.Show();
                    contextMenuStrip1.Show(PointToScreen(e.Location));
                    SetContentMenu();
                }
            }
            catch (Exception ex)
            {
                log.Error("(OTSMeasureStatusWindow.OTSMeasureStatusWindow_MouseClick)  " + ex.ToString());
            }
        }

        private void ViewStripMenuItem_Click(object sender, EventArgs e)
        {
            ToolWindow toolWindow = new ToolWindow(m_MeasureAppForm, this);
            int grayStart = 0;
            int grayEnd = 0;
            if (bBseData != null)
            {
                Bitmap bitmap = ImageDispose.ToGrayBitmap(bBseData, m_iWidth, m_iHeight);
                toolWindow.BseImg = bitmap;
                toolWindow.BBseData = bBseData;
                //获取去背景灰度值
                grayStart = m_MeasureAppForm.m_ProjParam.GetWorkSample().GetMsrParams().GetImageProcessParam().GetBGGray().GetStart();
                grayEnd = m_MeasureAppForm.m_ProjParam.GetWorkSample().GetMsrParams().GetImageProcessParam().GetBGGray().GetEnd();
                //设置可视化中的属性
                toolWindow.BseGrayMinValue = grayStart;
                toolWindow.BseGrayMaxValue = grayEnd;
            }
            DialogResult dialogResult = toolWindow.ShowDialog();
            if (dialogResult == DialogResult.Yes)
            {
                //获取去背景参数
                grayStart = toolWindow.BseGrayMinValue;
                grayEnd = toolWindow.BseGrayMaxValue;
                //设置去背景参数
                COTSImageProcParam cOTSImgProc = new COTSImageProcParam();
                cOTSImgProc = m_MeasureAppForm.m_ProjParam.m_ResultData.GetWorkingSample().GetMsrParams().GetImageProcessParam();
                CIntRange cIntRange = new CIntRange();
                cIntRange.SetStart(grayStart);
                cIntRange.SetEnd(grayEnd);
                cOTSImgProc.SetBGGray(cIntRange);
                m_MeasureAppForm.m_ProjParam.m_ResultData.GetWorkingSample().GetMsrParams().SetImageProcessParam(cOTSImgProc);
                //更新属性窗口
                m_MeasureAppForm.UpdatePropertyVal();
                //确认后进行去背景
                ShowRemoveBGImage();
                return;
            }
        }
    }
}